Avalue Technology RPC-0801-910 User manual

Part No. E20177630A0R
RPC-0801-910
8” Multi-functional Touch Panel PC
Quick Reference Guide
1st Ed – 19 March 2010
Copyright Notice
Copyright © 2010 Avalue Technology Inc., ALL RIGHTS RESERVED.

RPC-0801-910
2 RPC-0801-910 Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Copyright Notice
Copyright ©20010 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.

Quick Reference Guide
RPC-0801-910 Quick Reference Guide 3
Contents
1. Getting Started............................................................................................................4
1.1 Safety Precautions ................................................................................................4
1.2 Packing List...........................................................................................................4
1.3 System Specifications ...........................................................................................5
1.4 System Overview...................................................................................................7
1.4.1 Rear View..................................................................................................................................... 7
1.4.2 Right View.................................................................................................................................... 7
1.5 System Dimensions...............................................................................................8
1.5.1 RPC-0801-910............................................................................................................................. 8
2. Hardware Configuration.............................................................................................9
2.1 Jumper and Connector Setting, Driver and BIOS Installing...................................9
2.2 Installing SD card ................................................................................................10
2.3 Mode setting for RSC-W910 (only for boot loader update)..................................11

RPC-0801-910
4 RPC-0801-910 Quick Reference Guide
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
z1 x RPC-0801 Series Panel PC
z1 x Quick Reference Guide
z1 x CD/ DVD-ROM contains the followings:
—User’s Manual (this manual in PDF file)
—WinCE5.0/6.0 BSP,SDK and utilities
—Linux BSP and utilities
z1 x Power Adapter
z4 x screws for VESA

Quick Reference Guide
RPC-0801-910 Quick Reference Guide 5
1.3 System Specifications
Panel
Specifications RPC-0801-910
LCD size 8"
Display type SVGA TFT
Resolution 800 x 600
Color 262K
Pixel pitch 0.2025mm(H) x 0.2025mm(V)
Luminance 250 cd/m²
Contrast ratio 500
Viewing angle 60(U), 70(D), 70(L), 70(R)
Response time 50 ms
Backlight LED
Touch Type 4-wire Resistive
Touch Light Transmission 80%
Touch Interface I2C onboard touch interface
System
Board RSC-W910
CPU Onboard Nuvoton NUC910ABN 200 MHz
Boot loader NAND/NOR Flash
Memory Onboard 64MB SDRAM, Optional 128MB
Flash Onboard 128MB, Optional 512MB
Watchdog Timer Interrupt 0.28/1.12/4.47/17.9sec.
System Memory Onboard 64MB SDRAM, Optional 128MB
SSD SD or SDHC

RPC-0801-910
6 RPC-0801-910 Quick Reference Guide
Rear Panel I/O
Serial Port 1 x RS-232, 1x UART for debug message
Ethernet Onchip MAC + PHY, 1x 10/100 Base-Tx Fast Ethernet Compatible
USB 2 x USB 2.0
Mini USB 1 x USB client
Mechanical & Environmental
Color Front Silver and Back Black
Power Requirement +12V DC Input
Operating Temperature 0°C to 60°C.
Relative Humidity 0% to 90% relative humidity, non-condensing
Mounting Wall/Stand/VESA 75 mm X 75 mm
Dimensions 202 mm X 159 mm X 42.5 mm
Weight 1.07 Kgs

Quick Reference Guide
RPC-0801-910 Quick Reference Guide 7
1.4 System Overview
1.4.1 Rear View
1.4.2 Right View
Connectors
Label Function Note
COM0 Serial port 0 Debug message output
COM1 Serial port 1 DB-9 male connector
DC-in +12V DC-in power connector
LAN Ethernet connector RJ-45
Power Power switch
Mini USB USB client connector Mini USB connector
USB 2 x USB 2.0 connector Dual USB decks

RPC-0801-910
8 RPC-0801-910 Quick Reference Guide
1.5 System Dimensions
1.5.1 RPC-0801-910

Quick Reference Guide
RPC-0801-910 Quick Reference Guide 9
2.Hardware
Configuration
2.1 Jumper and Connector Setting, Driver and BIOS
Installing
zPlease refer to RSC-W910 Quick Installation Guide for further
information.
Note: If you need more information, please visit our website:
http://www.avalue.com.tw

RPC-0801-910
10 RPC-0801-910 Quick Reference Guide
2.2 Installing SD card
Step 1. Unfasten 6 screws to remove the bottom chassis.
Step 2. Install the SD card into the slot.
Step 3. Assemble the board and bottom chassis back as step 1.

Quick Reference Guide
RPC-0801-910 Quick Reference Guide 11
2.3 Mode setting for RSC-W910 (only for boot loader update)
Step 1. Unfasten 6 screws to remove the bottom chassis.
Step 2. Set jumper of JSET1 for Boot ROM/ Flash data bus width.

RPC-0801-910
12 RPC-0801-910 Quick Reference Guide
RUN INSTALL*
* Default
NOTE:
Set the jumper in INSTALL mode and connect RSC-W910 to host PC, and then turn on RSC-W910 to flash
Boot loader.
Step 3. Assemble the board and bottom chassis back as step 1.