Avantree Aria 3 User manual

Aria 3
User Manual
Model No.: BTHS-AS92

User Manual ARIA 3
2
EN
Table of Contents
Box Contents•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••3
Product Introduction ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••3
Product Overview•••••••••••••••••••••••••••••••••••••••••••••••••••••••3
Button Functions••••••••••••••••••••••••••••••••••••••••••••••••••••••••4
LED Indicators•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••5
Charging the Headphones ••••••••••••••••••••••••••••••••••••••••••••••••••••6
Connecting the Headphones to Your Device •••••••••••••••••••••••••••••••••7
Using with Your Phone••••••••••••••••••••••••••••••••••••••••••••••••••7
Using with Your PC••••••••••••••••••••••••••••••••••••••••••••••••••••••8
Conguring Audio Settings (Only for PC)•••••••••••••••••••••••••••••••9
Specications •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 11
Contact Us ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 53

User Manual ARIA 3
3
EN
Box Contents
Type C
Charging Cable Carrying Pouch
AUX 3.5mm
Audio Cable
Aria 3
Headphones
Product Introduction
Product Overview
2
1
3
4
B
A
ON / OFF /
PAIR
/
/
/
X
Charging Port
/ /
AUX 3.5mm Jack
EQ Button
ANC
Indicator
ANC
Switch
Status
Indicator

User Manual ARIA 3
4
EN
Button Functions
Headphones
No. Button Functions
Switch to the“ON / OFF”position to turn the head-
phones on / o
Switch to the“PAIR” position & hold for 2 seconds to
enter pairing mode
Press once to play / pause
Press once to accept / end call
Press & hold for 2 seconds to reject call
Press twice to redial last number
Press once to increase / decrease volume
Press & hold for 2 seconds to skip / replay track
Press & hold both buttons for 5 seconds to clear pairing
history
EQ Press once to switch between Bass/Normal mode
ANC Switch to turn the Active Noise Cancellation on / o
EQ and Press & hold“EQ & +” or“EQ & –“ for 1 second to turn
the voice prompt on / o
33
44
22
11ON
PAIR
OFF
3322
/
/

User Manual ARIA 3
5
EN
No. Indicator & Voice Prompt Status
Solid red Charging
Flashing red,“LOW BATTERY” voice indicator Low battery
Blue ash every 2 seconds,“WELCOME TO
AVANTREE”voice indicator Power on
Solid red for 1 second then o, “GOODBYE”
voice indicator Power o
Alternate red & blue ashes,“PAIRING” voice
indicator Pairing
Blue ash every 5 seconds,“CONNECTED”
voice indicator Connected
Blue ash every 2 seconds,“DISCONNECTED”
voice indicator Disconnected
Solid pink for 5 seconds, then alternate red &
blue ashes Clearing pairing history
Solid green,“NOISE CANCELING”voice
indicator Active Noise Cancella- tion (ANC) mode
LED Indicators
A
B

User Manual ARIA 3
6
EN
Charging the Headphones
A“LOW BATTERY”voice prompt and a ashing red light indicates low
battery. In order to charge, you can use either a 5V/500mA-2A rated USB
adapter (your phone charger or similar should work) or PC USB port as a
power source.
Plug the provided type C power cable directly into the headphones’charging
port.
A solid red light indicates that charging is in progress; once the light turns o,
your headphones will be at full battery.
A
PAIR
OFF
ON
2hrs

User Manual ARIA 3
7
EN
Connecting the Headphones to Your Device
STEP 1
Turn on the headset. It will enter pairing mode automatically on the rst use.
Otherwise, slide and hold the power switch to the“PAIR” position until you
hear“Pairing”and see the LED ashing RED & BLUE.
STEP 2
Turn on your device’s Bluetooth and select “Avantree Aria 3” in the
Bluetooth menu.
STEP 3
Keep the headphones close to your device and wait for 5-10 seconds or until
they connect. Once they’re successfully connected, you’ll hear a“CONNECT-
ED” voice indicator on headphones. The headphones’LED indicator will ash
blue, then turn solid blue once you play audio.
Using with Your Phone
PAIR
OFF
ON
Hold for 3s

User Manual ARIA 3
8
EN
For subsequent use, your headphones should automatically reconnect to the
last-paired device within a few seconds of being turned on. If not, you can
manually activate reconnection by sliding the switch to“PAIR” once,
or by selecting “Avantree Aria 3”in your device’s Bluetooth menu.
ON
PAIR
OFF
Using with Your PC
To connect the headphones to your PC, follow these steps:
STEP 1
Turn on the headset. It will enter pairing mode automatically on the rst use.
Otherwise, slide and hold the power switch to the“PAIR” position until you
hear“Pairing”and see the LED ashing RED & BLUE.
STEP 2
Go to your computer’s Bluetooth settings and search for the Avantree device.
Click“Connect”.
STEP 3
Keep the devices close together. Once successfully connected, the headset’s
LED will turn solid blue, and you will hear a“Connected”voice indicator.
OFF
Accessory
Accessory
Avantree Aria 3
MY DEVICES
Connected

User Manual ARIA 3
9
EN
Conguring Audio Settings (Only for PC)
You may need to congure your audio settings when using the Aria 3 with
your PC or laptop.
STEP 1
In your device’s audio settings, ensure that“Avantree Aria 3”is selected as
the default for both SOUND OUTPUT / PLAYBACK and INPUT / MICROPHONE
device.
For subsequent use, the headset should automatically reconnect to the last
paired device within a few seconds after turning on. If not, manually
reconnect by sliding the power switch to“PAIR” once or selecting“Avantree”
from your device’s Bluetooth menu.
Sound
Output
Choose your output device
Input
Choose your input device
Avantree Aria 3
Avantree Aria 3
Settings System Sound
Sound
Avantree Aria 3
Output
Select a device for sound output:
Avantree Aria 3
Input
Select a device for sound input:
System
Preferences...
Sound

User Manual ARIA 3
10
EN
NOTE: On Windows 7 / 8.1 / 10, if you use headphones with PC’s built-in
Bluetooth, select “Avantree Aria 3 hands free”as the default instead.
STEP 2
Repeat the above steps in your meeting software (i.e. Teams, Zoom, Skype,
etc.)
Avantree Aria 3
Speaker
Avantree Aria 3
Microphone
Audio Settings
Audio Devices
Avantree Aria 3
Device Settings
Avantree Aria 3
Avantree Aria 3
Speaker
Test Speaker
Microphone
Test Mic
VOICE SETTINGS
OUTPUT DEVICE
INPUT DEVICE
Avantree Aria 3
Avantree Aria 3
INPUT VOLUME
OUTPUT VOLUME
USER SETTINGS
BILLING SETTINGS
APP SETTINGS
Voice & Video
Settings / Preference Audio
SettingsStart Meeting
Settings
Microsoft Teams

User Manual ARIA 3
11
EN
Specications
Headphones
Bluetooth version v5.3
Supported audio codecs SBC
Supported proles HSP v1.2, HFP v1.7, AVRCP v1.6, A2DP
v1.3.1
Operating range Up to 30ft / 10m
Drivers 40mm
Impedance 32Ω
Frequency response 20Hz - 20KHz
Charging time ~2hrs
Operating time Up to 55hrs (ANC o)
Standby time 325hrs (ANC o)
Product size 190mm x 175mm x 80mm
Headphones weight ~230g
Earpads inner diameter / depth 60mm x 40mm x 35mm
Earpads outer diameter 101mm x 80mm
Rated input DC5V/500mA~2.0A
Power port Type C

53
Contact Us
Support Tickets
Support Email
Support Numbers
FAQ
avantree.com/submit-a-ticket
[e-mail]
avantree.com/support/aria3
CA [phone]am-6pm PST
US [phone]am-6pm PST
UK [phone]am-6pm GMT
DE [phone]am-9pm CET
FR [phone]am-9pm CET
IT [phone]am-6pm CET
ES [phone]am-6pm CET
AU [phone]am-7pm AEST
Mon-Fri
Mon-Fri
Mon-Sat
Mon-Sat
Mon-Sat
Mon-Sat
Mon-Sat
Mon-Fri
Product Registration See QR code on the product.

Manufacturer:
Avantronics Limited
Luohu District, Shenzhen 518000 China
+ 86 755 8228 5022 [email protected]

US Importer:
Avantree Corporation
San Jose, California 95119 USA
[phone] [email protected]

UK Importer:
Avantree Limited
Watford, WD180 0HQ UK
[phone] [email protected]
Servicer in Europe:
GizmexGmbH,
Sternstr.67, 40479Dusseldorf,Germany
[phone] [email protected]
EC REP
Model No.: BTHS-AS92
Dispose of the packaging and this product in accordance with the latest provisions.
Z-PKQG-AS92-V0