AVer FC2020-P1 User manual

AVer FC2020-P1
User Manual

Table of Contents
PREFACE ............................................................................................................................1
PRODUCT SPECIFICATIONS.............................................................................................1
PACKAGE CONTENTS.......................................................................................................5
PRODUCT INSTALLATION.................................................................................................6
MONITOR SETTING .............................................................................................................6
HARDWARE INSTALLATION AND I/OPIN ASSIGNMENT ..............................................................7
POWER OVER ETHERNET (POE)........................................................................................10
IPASSIGNMENT................................................................................................................11
FINDING IPCAMERA BY USING “NXU LITE RECORDING SOFTWARE”........................................11
FINDING IPCAMERA BY USING “AVER IPCAM UTILITY”.........................................................14
USING NON-DHCPSERVER/ROUTER NETWORK................................................................16
INSTALLACTIVEXCONTROL...............................................................................................18
USING THE IP CAMERA BROWSER INTERFACE..........................................................20
PREVIEW .........................................................................................................................20
SYSTEM >GENERAL .........................................................................................................23
SYSTEM >GENERAL >MAINTENANCE.................................................................................23
To Upgrade the IP Camera Firmware.......................................................................24
SYSTEM >GENERAL >DATE &TIME...................................................................................25
SYSTEM >USER MANAGEMENT .........................................................................................26

SYSTEM >USER MANAGEMENT .........................................................................................26
SYSTEM >NETWORK SETTING >SETTING...........................................................................28
SYSTEM >NETWORK SETTING >SEVER .............................................................................29
SYSTEM >NETWORK SETTING >DDNS.............................................................................30
SYSTEM >NETWORK SETTING >OTHER 1..........................................................................32
SYSTEM >NETWORK SETTING >IPV6................................................................................38
SYSTEM >ADVANCE >HTTPS..........................................................................................39
SYSTEM >ADVANCE >SNMP ...........................................................................................41
SYSTEM >ADVANCE >ACCESS LIST ...................................................................................43
SYSTEM >ADVANCE >QOS/DSCP ...................................................................................44
SYSTEM >IMAGE..............................................................................................................45
SYSTEM >IMAGE>OSD ...................................................................................................45
SYSTEM >IMAGE >PREFERENCE.......................................................................................46
SYSTEM >IMAGE>ADVANCED ...........................................................................................47
SYSTEM >IMAGE>PRIVACY MASK .....................................................................................49
SYSTEM >VIDEO STREAM >GENERAL ...............................................................................50
SYSTEM >VIDEO STREAM >STREAM1...............................................................................51
SYSTEM >VIDEO STREAM >STREAM2...............................................................................53
SYSTEM >VIDEO STREAM >STREAM3...............................................................................55
SYSTEM >AUDIO..............................................................................................................56
SYSTEM >SD CARD.........................................................................................................57
EVENT >ARRANGEMENT >MOTION....................................................................................58
EVENT >ARRANGEMENT >PREFERENCE ............................................................................59

EVENT >SCHEDULE .........................................................................................................62
EVENT >DI/DO...............................................................................................................63
STATUS INFORMATION .......................................................................................................64
NETWORK CONFIGURATION..........................................................................................65
FACTORY DEFAULT .........................................................................................................67
TROUBLESHOOTING.......................................................................................................68
APPENDIX.........................................................................................................................69
FCC NOTICE (CLASS A)...................................................................................................70
COPYRIGHT......................................................................................................................70
LIMITED WARRANTY .......................................................................................................71
GOVERNING LAW AND YOUR RIGHTS ..........................................................................72

1
ENGLISH
Preface
The FC2020-P1 is a compact cube camera for indoor use with two-way audio communication. It has
the added security of a Micro SD based local backup capacity ensuring that images of events also
save locally when the alarm is triggered or the network is down. This compact camera offers HD720p
resolution and advanced features including intelligent motion detection and privacy masks. The
1.3-megapixel H.264 FC2020-P1 camera can provide your system with good quality, discreet indoor
surveillance.
Product Specifications
2M cube camera
HD Definition (1080p) support
Built-in IR LED (distance :8 Meter) for night view
Support PIR function
Digital Wide Dynamic Range
Power over Ethernet (PoE)
H.264/MJPEG compression formats
microSD card backup (SD card is not included)
2-way audio
Adjustable shutter speed
Support iPhone/ iPAD/ Android phone and tablet
Free bundled 32-CH AVer NXU Lite recording software

2
Specifications
Hardware
CPU
Multimedia SoC
RAM
256MB
Flash
16M
Image sensor
1 / 2.7” Mega-Pixel CMOS sensor
Lens Type
[email protected], Megapixel fixed lens
ViewAngle
103°(H), 61°(V)
Shutter time
1/5~1/33,000 sec
Min. illumination
Color : 1.0 Lux (IR LED ON)
B / W: 0 Lux (IR LED ON)
I/O
1 Sensor in /1 Relay out
MIC in
1
Audio Out
G.711(64K) and G.726(32K,24K) audio compression
Input : MIC built-in
Output : 3.5mm phone jack, or Speaker
Support 2-way audio
IR distance
8 Meter
PIR
Yes
Power Over Ethernet
Yes
Power Consumption
DC12V : 2.76W(IR Off), 3.72W(IR On);
PoE :3.3W(IR Off), 4.3W(IR On)
Dimensions
62mm x 100(mm)x 44(mm)
Operation Temperature
0°C ~ 45°C
Weight
150g (without bracket); 270g (with bracket)
Network
Ethernet
10/100 Base-T
Network Protocol
Pv6, IPv4, HTTP, HTTPS, SNMP, QoS/DSCP, Access
list, RTSP, TCP/ IP, UDP, SMTP, FTP, PPPoE, DHCP,
DDNS, NTP, UPnP, 3GPP, SAMBA, Bonjour

3
ENGLISH
System
Video Resolution
1920x1080@30fps, 1280x720@30fps,
640x480@30fps, 320x240@30fps, 176x144@30fps
Video Adjust
Brightness, Contrast, Hue, Saturation, Sharpness,
AGC, Shutter Time, Sense-up, D-WDR, Lens
Distortion Correction, Flip, Mirror, Day&Night
adjustable, Red Gain and Blue Gain, Denois
Triple Streaming
Yes
Image snapshot
Yes
Full screen monitoring
Yes
Privacy Mask
Yes, 5 different areas
Compression format
H.264/ M-JPGE
Video bitrate adjust
CBR, VBR
Motion Detection
Yes, 3 different areas
Triggered action
Mail, FTP, Save to SD card, DO, SAMBA
Pre/ Post alarm
Yes (Pre: 5 secs/ Post: 5 secs)
Security
Password protection, IP address filtering, HTTPS
encrypted data transmission, QoS/DSCP
Firmware upgrade
HTTP mode, can be upgraded remotely
Simultaneous connection
Up to 10
Audio
Yes, 2-way (mono)
MicroSD/SDHC card management
Recording trigger
Motion Detection, IP check, Network break down (wire
only),Schedule, DI
Video format
AVI, JPEG
Video playback
Yes
Delete files
Yes

4
Web browsing requirement
OS
Windows 7, XP
Microsoft® IE 8.0 or above
[Note] Please enable “Compatibility View”while using
IE 10 or above.
Hardware Suggested
Intel®Dual Core 2.53GHz, RAM: 1024MB, Graphics
Card: 128MB
Mobil support
iOS 5 or above, Android 1.6 or above.
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

5
ENGLISH
Package contents
Item
Descriptions
1. FC2020-P1
2. Bracket
3. Screw pack
4. Power Adaptor(DC 12V/0.5A) (Optional)
5. CD (User’s Manual and Quick Guide, NVR
software included)

6
Product Installation
Monitor Setting
1. Right-click on the desktop. Select “ Properties”
2. Change “Color quality” to “Highest (32-bit)”.

7
ENGLISH
Hardware Installation and I/O Pin Assignment
1. Install with bracket
Please refer to the picture for camera installation. Use the screws to lock the bracket to the wall or
ceiling, and then connect the camera to the bracket. There’s a knob on the back of the bracket.
Loosen the knob and you can adjust the angle of camera. Tighten it to fix the angle.

8
2. Connector Instruction
The camera connectors are as below. Connect the power and the Ethernet cable with the camera,
and set it according to your network environment.
3. Adjust focus
Use the rotary dial to adjust focus until the image is clear.
AUDIO
OUT ETHERNET
DI/DO
DC 12V
POWER
DEFAULT
BUTTON MICRO SD
CARD SLOT
PIR SENSOR
MICROPHONE

9
ENGLISH
4. I/O Configuration
I/O Connection
a. Please connect the G & DO pin to the external relay (buzzer) device
When no event happens, DO output is 5V (DO and GND are disconnected). When the camera
detects an event happening and triggers an external alarm, DO output is 0V (DO and GND are
connected).
b. Please connect the G & DI pin to the external trigger device.
c. If you select "N.O" in "Input sensor setting", when an external devise or circuit makes DI and
GND pin connected, the camera input alarm is triggered, and then camera will execute the
action user has set, for example, send snapshot to E-mail address.
If you select "N.C" in "Input sensor setting", when external devise or circuit makes DI and GND
pin disconnect, the camera input alarm is triggered, and then camera will execute the action
the user has set, for example, send snapshot to E-mail address.

10
Power Over Ethernet (PoE)
Set up the IP camera through Power over Ethernet (PoE). PoE is a technology that integrates power
into a standard LAN infrastructure. It enables power to be provided to the network device, such as an
IP camera, using the same cable that is used for network connection. It eliminates the need for power
outlets at the camera locations.
[Note] PoE (Power Over Ethernet) (Optional) 802.3af, 15.4W PoE Switch is recommended.
Ethernet
PoE Switch
PoE IP Camera
PoE IP Camera
Ethernet Cable
Ethernet Cable

11
ENGLISH
IP Assignment
There are two ways to find IP Cameras:
Finding IP Camera by using the “NXU Lite recording software”
Finding IP Camera by using the “AVer IPCam Utility”
Finding IP Camera by using “NXU Lite recording software”
1. The NXU Lite software is in the attached software CD. Before launching it, please install the
software first. During the installation process, users will be required to input a User name and
Password for login NXU Lite system. Users can define the User name and Password as desired.
Please refer to the NXU Lite user manual for detailed installation instructions.
2. To run the application, double-click on your PC desktop or click Start > Programs > DVR >
NXU Lite. For security purposes, some of the features require you to enter the User name and
Password before it can be accessed. When the Authorization dialog box appears, key in your User
ID and Password. (If this is the first time, enter the one you have registered when installing the
software.
Click it to call out virtual
the keyboard.

12
3. Click “Setup”button.
4. Click “Add IPCam”button.
5. Select “IP Camera”item.

13
ENGLISH
6. Enter IP Camera’s ID and Password (default is admin/admin) and click “Auto Search”to find
camera.
7. In the Search Result window, click the IP camera model that the user has purchased (Please
ignore ONVIF connection item); the camera is in red text that is configurable. Users can click on
the camera in the red text and configure the IP camera’s settings; even if the IP camera is not in
the same IP segment. Press “OK”to go back to the previous screen and press ”Connect”to start
live view.
Click the IP camera model
that user has purchased.
Please ignore ONVIF
protocol selection; NXU Lite
doesn’t support ONVIF
connection.

14
Finding IP Camera by using “AVer IPCam Utility”
1. Use the software, “AVer IPCam Utility” to assign the IP address of the IP camera. The software is
in the attached software CD.
2. Run the IPCam Utility
3. Select the proper network adapter and click [Search] to begin searching.
4. Select and double click the IP camera you want to access. If you want to change the setting of the
selected IP camera, enter the user ID, correct password, and change the settings and then click
Apply button. This will change the setting and rescan the network again.

15
ENGLISH
5. The IE browser will open and direct you to the IP camera login page. This requires IPViewer.ocx to
run. If the IE ActiveX warning message appears, click to allow running the add-on.
[Note]
The default IP address is: 192.168.1.168
The default ID and Password are both ”admin”.
You can’t enter a device name in Chinese or any other special characters (' " \ & ^).
Gateway number can’t be “0”.
IP camera device name should be less than 30 digits
Default ID: admin
Default Password: admin

16
Using NON-DHCP Server/Router Network
In Non-DHCP server/router network, the static IP address must be assigned to the device each time
when adding another IP camera to the network; the default IP address of the current one must be
changed to avoid conflict.
Please make sure the Subnet of the PC’s IP address and the IP camera’s IP address are the same.
[Example]
The same Subnet:
IP camera IP address: 192.168.1.168
PC IP address: 192.168.1.100
Different Subnets:
IP camera IP address: 192.168.1.168
PC IP address: 192.168.2.100
To Change PC IP Address:
Control PanelNetwork Connections Local Area Connection Properties Internet
Protocol (TCP/IP) Properties
Please make sure your IP camera and PC have the same Subnet. If not, please change IP
camera subnet or PC IP subnet accordingly.
PC’s IP address: