AVer FB2027-1 User manual

AVer Bullet type Camera
Installation Guide

Table of Contents
IMPORTANT SAFEGUARD.................................................................................................1
PACKAGE CONTENTS.......................................................................................................2
THE FOLLOWING ITEMS ARE INCLUDED IN THE PACKAGE. .......................................2
OPTIONAL ACCESSORIES................................................................................................2
BULLET IP CAMERA PARTS..............................................................................................3
MOUNTING THE IP CAMERA.............................................................................................4
DEPLOYING NETWORK ........................................................................................................4
Network Connection via Ethernet Switch....................................................................4
Power over Ethernet Connection................................................................................5
CONNECTING EXTERNAL DEVICES TO I/OTERMINAL BLOCK....................................................6
POWER LED......................................................................................................................6
INTERNAL CONNECTION DIAGRAM OF DI/DO.........................................................................6
MOUNTING THE IPCAMERA .................................................................................................7
FOCUSING THE IPCAMERA WITH BNC MONITOR ...................................................................8
INSERT MICROSD CARD TO SYSTEM.....................................................................................9
HARDWARE RESET .........................................................................................................10
TECHNICAL SPECIFICATIONS........................................................................................11
FB2027-1 (E) /FB2027-3 (E).......................................................................11
COPYRIGHT......................................................................................................................15
NOTICE..............................................................................................................................15
WARNING..........................................................................................................................15
GOVERNING LAW AND YOUR RIGHTS ..........................................................................16

1
ENGLISH
Important Safeguard
Do not use power supply with different voltage
other than DC12V/PoE.
Do not submerge the unit in the water.
Unplug the power of this unit as soon as smoke
or unusual odor is detected.
Unplug the power supply before cleaning. Use
only a lens cleaning cloth and never use
benzene, thinner, or other solvent for cleaning.
Do not attempt to service this unit by yourself.
Always refer all servicing to qualified service
personnel.
Do not place the unit in unsteady surface and
also do not drop the unit.
Keep the IP camera housing close and prevent
the dust from getting in the housing.

2
Package Contents
The following items are included in the package.
AVer bullet type camera
Software & Manual CD
2 L-type Wrenches
3 Screws
3 Plastic Anchors
Optional Accessories
Power Adapter (12V, 2A) and Power cord
* The power adapter will vary depending on the
standard power outlet of the country where it is
sold. Depending on your package the power
adapter maybe included.

3
ENGLISH
Bullet IP Camera Parts
No.
Function
No.
Function
(1)
Sun Shield
(6)
RJ45 Ethernet Jack
(2)
Camera Lens
(7)
I/O Terminal Block
(3)
Light Sensor
(8)
Phone Jack (Audio In)
(4)
Power Jack
(9)
Phone Jack (Audio Out)
(5)
BNC Jack (Video Out)

4
Mounting the IP Camera
This section provides useful tips on how to adjust the IP camera to meet your needs.
Deploying Network
Network Connection via Ethernet Switch
Connect the RJ45 cable from the Ethernet switch to RJ45 Ethernet jack of camera
Connect the power adapter to power jack of camera.

5
ENGLISH
Power over Ethernet Connection
Bullet type camera is fully complies with PoE standard. It allows you to use PoE enabled switch or PoE
injector to transmit data and power thru single Ethernet cable.
PoE Enabled Switch Connection Diagram
PoE Injector Connection Diagram

6
Connecting External Devices to I/O Terminal Block
No.
Function
(1)
Power 12V
(2)
Digital Output
(3)
Digital Input
(4)
Ground
[Note] Maximum power output is 12V/100mA
Power LED
LED
Status
Steady Red
Heating
Blinking Green
System working
Steady Green
Booting
Firmware updating
No Light
Power off
Internal Connection Diagram of DI/DO

7
ENGLISH
Mounting the IP Camera
○
1 Insert the 3 plastic anchors in the wall. Then, screws the 2 screws into the 2 top of plastic anchors
and do not fasten the screws; leave some space to allow IP camera to hook on the screws.
○
2 Hook the IP Camera on the screws that are screwed on top of 2 plastic anchors. Then, fasten the
screws.
○
3 Secure the last screw at bottom hole of IP camera.
○
4 Use the torx pin head bolt to lose the screw under the stand to adjust the angel of IP camera. After
adjusting, use the torx pin head bolt to fix the IP camera.

8
Focusing the IP Camera with BNC Monitor
The IP camera is supported with BNC analog video out jack which allows you to connect an analog
display devices such as an LCD BNC monitor for you to adjust the camera focus and zoom.
1. Connect the LCD BNC monitor to the BNC jack.
2. Open the IP camera case.
3. Slightly loosen the focus and zoom control knobs and adjust the focus and zoom range. Slightly
tighten the focus and zoom knobs once you are done adjusting.