AVer FB3028-RT1 User manual

AVer Rugged Bullet type Camera
Installation Guide

Table of Contents
IMPORTANT SAFEGUARD.................................................................................................1
PACKAGE CONTENTS.......................................................................................................2
THE FOLLOWING ITEMS ARE INCLUDED IN THE PACKAGE. .......................................2
OPTIONAL ACCESSORIES................................................................................................2
RUGGED BULLET IP CAMERA PARTS.............................................................................3
MOUNTING THE IP CAMERA.............................................................................................4
DEPLOYING NETWORK ........................................................................................................4
Network Connection via Ethernet Switch....................................................................4
Power over Ethernet Connection................................................................................5
CONNECTING EXTERNAL DEVICES TO I/OTERMINAL BLOCK....................................................6
POWER LED......................................................................................................................6
INTERNAL CONNECTION DIAGRAM OF DI/DO.........................................................................6
MOUNTING THE IP CAMERA .................................................................................................7
FOCUSING THE IPCAMERA WITH BNC MONITOR ...................................................................9
INSERT MICROSD CARD TO SYSTEM...................................................................................10
HARDWARE RESET .........................................................................................................11
TECHNICAL SPECIFICATIONS........................................................................................12
FB2028-T1 (E)/FB2028-T2 (E)/FB2028-TM (E).........................................12
FB3028-RT1 (E)/FB3028-RT2 (E)/FB3028-RTM (E)..................................16
COPYRIGHT......................................................................................................................20
NOTICE..............................................................................................................................20
WARNING..........................................................................................................................20
GOVERNING LAW AND YOUR RIGHTS ..........................................................................22

1
ENGLISH
Important Safeguard
Do not use power supply with different voltage
other than DC12V/PoE.
Do not submerge the unit in the water.
Unplug the power of this unit as soon as smoke
or unusual odor is detected.
Unplug the power supply before cleaning. Use
only a lens cleaning cloth and never use
benzene, thinner, or other solvent for cleaning.
Do not attempt to service this unit by yourself.
Always refer all servicing to qualified service
personnel.
Do not place the unit in unsteady surface and
also do not drop the unit.
Keep the IP camera housing close and prevent
the dust from getting in the housing.

2
Package Contents
The following items are included in the package.
AVer rugged bullet type camera
Software & Manual CD
2 L-type Wrenches
Sun Shield
2 Sun Shield Bolts
Torx Pin Head Bolt
Wall Mount Bracket
Alignment Sticker
3 Screws
3 Washers
3 Plastic Anchors
Hex Socket Cap Bolt
Optional Accessories
Power Adapter (12V, 4A) and Power cord
* The power adapter will vary depending on the
standard power outlet of the country where it is
sold. Depending on your package the power
adapter maybe included.

3
ENGLISH
Rugged Bullet IP Camera Parts
No.
Function
No.
Function
(1)
Sun Shield
(6)
BNC Jack (Video Out)
(2)
Camera Lens
(7)
RJ45 Ethernet Jack
(3)
Light Sensor
(8)
I/O Terminal Block
(4)
Latch
(9)
Phone Jack (Audio In)
(5)
Power Jack
(10)
Phone Jack (Audio Out)

4
Mounting the IP Camera
This section provides useful tips on how to adjust the IP camera to meet your needs.
Deploying Network
Network Connection via Ethernet Switch
Connect the RJ45 cable from the Ethernet switch to RJ45 Ethernet jack of camera
Connect the power adapter to power jack of camera.

5
ENGLISH
Power over Ethernet Connection
Rugged bullet type camera is fully complies with PoE standard. It allows you to use PoE enabled
switch or PoE injector to transmit data and power thru single Ethernet cable.
PoE Enabled Switch Connection Diagram
PoE Injector Connection Diagram

6
Connecting External Devices to I/O Terminal Block
No.
Function
(1)
Power 12V
(2)
Digital Output
(3)
Digital Input
(4)
Ground
[Note] Maximum power output is 12V/100mA
Power LED
LED
Status
Steady Red
Heating
Blinking Green
System working
Steady Green
Booting
Firmware updating
No Light
Power off
Internal Connection Diagram of DI/DO

7
ENGLISH
Mounting the IP Camera
1. Use the supplied 2 sun shield bolts and
secure the sun shield on the IP camera.
2. Place the sticker on the wall surface. Then
spot the mark and drill the 4 holes
indicated on the sticker. It’s not necessary
to drill the biggest hole if you are going to
run the wire on the side.
3. Insert the 3 plastic anchors in the wall.
Place the washer on the 3 screws and
secure the mounting bracket on the wall.
4. Hook the IP Camera and use the hex
socket cap bolt to secure the IP camera on
the mount bracket.

8
5. After adjusting the focus and zoom control,
use the torx pin head bolt to secure the IP
camera from being tampered.