Avermedia AVerAI EN713-AAE9 User manual

1
AVerMedia Carrier Board and Box PC
EN713-AAE9/ EN713(EOL)/ NX213B
Designed for NVIDIA®Jetson Nano/ Xavier NX Module
AVerMedia Technologies, Inc.
No. 135, Jian 1st Rd., Zhonghe Dist., New Taipei City 23585, Taiwan
Tel: [phone]
Fax: [phone]
Sales and Marketing: Contact
Technical Support: Professional User

2
Table of Contents
Preface...................................................................................................................................................................................................4
1.0 Introduction...................................................................................................................................................................................8
1.1 Product Specifications.............................................................................................................................10
2.0 Product Overview .................................................................................................................................................................... 11
2.1 Block Diagram............................................................................................................................................11
2.2 Top View of Carrier Board....................................................................................................................12
Bottom View of Carrier Board ...................................................................................................................13
2.3 Connector Summary................................................................................................................................14
2.4 Switch Summary .......................................................................................................................................14
3.0 Feature Description ................................................................................................................................................................. 15
3.1 Connector and Switch Locations........................................................................................................15
3.4 260-Pin SODIMM Connector..............................................................................................................18
3.5 SATA Power Wafer and SATA Connector ......................................................................................18
3.6 Fan Wafer.....................................................................................................................................................19
3.8 USB 3.1 Gen 1 2-Port Connector........................................................................................................20
3.9 HDMI Video Output Connector .........................................................................................................20
3.10 OTG USB/ Micro-Type Connector..................................................................................................20
3.11 RS-485 Connector...................................................................................................................................21
3.12 54V DC Power Jack...............................................................................................................................21
3.14 Mini Card Connector............................................................................................................................23
3.16 Force Recovery Button.........................................................................................................................23
3.17 Power on Button......................................................................................................................................24
3.18 4-Pin DIPSwitch.....................................................................................................................................24
3.19 Other Switch and Jumpers.................................................................................................................24
4.0 Installation......................................................................................................................................................................... 25
5.0 Software.............................................................................................................................................................................. 25
6.0 Power Consumption........................................................................................................................................................ 26

3
Revision History
Revision
Date
Updates
1.0
02/24/2021
Initial release
2.0
03/01/2022
Update Power Consumption
2.1
10/31/2022
1. Update Safety Precaution/Product specification
2. Update EN713 box PC EOL information

4
Preface
Disclaimer
The information contained in this user manual, including but not limited to any product
specification is subject to change without notice. AVerMedia assumes no liability for any damages
incurred directly or indirectly from any technical or typographical errors or omissions contained
herein or for discrepancies between the product and the user manual.
Technical Support
If you experience the difficulty after reading this manual and/or using the product, please contact
the reseller from which you purchased the product. In most cases, the reseller can help you with the
product installation and the difficulty you encountered.
In case the reseller is not able to resolve your problem, our highly capable global technical support
team can certainly assist you. Our technical support section is available 24 hours a day and 7 days a
week through our website, with the click here. For more contact information, you may find it in the
section of AVerMedia Global Offices.
Contact Enquiry:
For more information of our products, pricing, and order placement, please fill in our inquiry
form here, we will contact you within 24 hours.
Download User Manual
Please click this link, here, to download the file of this user manual from AVerMedia website.

5
AVerMedia Global Offices
https://www.avermedia.com/professional/contact

6
Limited Product Warranty
AVerMedia provides the two-year product warranty. Should this product, in AVerMedia's
opinion, fail to be in the good working order during the warranty period, AVerMedia will, at its
option, repair or replace it at no charge, provided that the product has not been subjected to abuse,
misuse, accident, disaster, or non-AVerMedia authorized modification or repair.
You may obtain the warranty service by delivering this product to an authorized AVerMedia
business partner or to AVerMedia along with the proof of purchase. Product returned to
AVerMedia must be pre-authorized by AVerMedia with an RMA (Return Material Authorization)
number marked on the outside of the package and sent prepaid, insured, and packaged for the safe
shipment. AVerMedia will return the product by prepaid shipment service.
The limited product warranty is only valid over the serviceable life of the product. This is defined
as the period during which all components are available. Should the product prove to be
irreparable, AVerMedia reserves the right to substitute an equivalent product if available or to
retract the product warranty if no replacement is available.
The above product warranty is the only warranty authorized by AVerMedia. Under no
circumstances will AVerMedia be liable in any way for any damages, including any lost profits,
lost savings, or other incidental or consequential damages arising out of the use of, or inability to
use, such product.
Copyright Notice
The information contained in this document is subject to change without notice. AVerMedia shall
not be liable for errors contained herein or for incidental consequential damages in connection with
the furnishing, performance, or use of this material. This document contains proprietary
information that is protected by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated to another language without the prior written
consent by AVerMedia.

7
Trademark Acknowledgement
AVerMedia acknowledges all the trademarks, registered trademarks, and/or copyrights referred
to in this document as the property of their respective owners. Not listing all possible
trademarks or copyright acknowledgments does not constitute the lack of acknowledgment to
the rightful owners of the trademarks and copyrights mentioned in this document.
ESD Warning
Electronic components and circuits are sensitive to Electrostatic Discharge (ESD). When
handling any circuit board assemblies including AVerMedia AVerMedia products, it is highly
recommended that ESD safety precautions can be observed. ESD safe best practices can
include, but are not limited to the following ones.
1. Leave the circuit board in the antistatic package until it is ready to be installed.
2. Use a grounded wrist strap when handling the circuit board. At a minimum, you need to
touch a grounded metal object to dissipate any static charge, which may be present on you.
3. Avoid handling the circuit board in the carpeted areas.
4. Handle the board by the edges and avoid the contact with the components.
5. Only handle the circuit boards in ESD safe areas, which may include ESD floor and/or table
mats, wrist strap stations, and ESD safe lab coats.
Safety Precaution:
1. All cautions and warnings on the device should be noted.
2. For safety consideration, do NOT open the device if not a qualified service stuff.
3. Place the device on a solid surface during installation to prevent falls.
4. Keep the device away from humidity.
5. Do NOT leave this device in an un-controlled environment with temperatures beyond the
device’s permitted storage temperature to avoid damage.
6. All adaptors and cables supplied by AVerMedia are verified. Do NOT use any others not
supplied by AVerMedia to avoid any malfunction or fires.
7. Make sure the power source matches the power rating of the device.

8
8. Place the power cord where people cannot step on it. Do not put anything on the power cord.
9. Always completely disconnect the power while the device is not usage or idle for a long time.
10. Disconnect the device from any AC supply before cleaning. While cleaning, use a damp cloth
instead of liquid or spray detergents.
11. Make sure the device is installed near a power outlet and easy for accessible.
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out the heatsink or heat spreader of the device when the system is running.
14. Never pour any liquid into the openings. This could cause fire or electric shock.
15. The static electricity should be noted while installing any internal components. Consider to
use a grounding wrist strap and put all electronic parts in static-shielded containers.
If the following situations occur, please contact our service personnel:
(1) The device is dropped or damaged
(2) Damaged power cord or plug
(3) Exposure to moisture
(4) Liquid intrusion into the device
(5) Any obvious signs of damage displayed on the device
(6) Device is not working as expected or in a manner as described in this manual
1.0 Introduction

9
AVerMedia EN713-AAE9 is a fully featured carrier board developed for NVIDIA®Jetson Nano/
Xavier NX module (EN713(EOL)/NX213B). It is specifically designed to have eight 10/100Mb
Ethernet ports with PoE (PSE, Power Sourcing Equipment) support.
Operating with NVIDIA®Jetson Nano/ Xavier NX module, EN713-AAE9/EN713(EOL)/NX213B
can process eight channels of 1080p30 video stream, which makes it the perfect choice in building
the high performance AI edge computing platform for the intelligent video analytics applications.
EN713-AAE9/ EN713(EOL)/ NX213B have compact size, which can fit in the compact platform for
the commercial and industrial application. And it can operate in the temperature range from -10°C up
to 70°C. AVerMedia EN713-AAE9/ EN713(EOL)/ NX213B provides not only the access to a
great list of latest interfaces on Nano/ Xavier NX module but also 1x RS-485 interface, 1x micro
controller unit (MCU), and 1x RTC battery as the function enrichment.

10
1.1 Product Specifications
Product Name
Fanless/Fan/Carrier Board
Fanless Box PC
EN713(EOL)/ NX213B
Carrier Board
EN713-AAE9
Core
System on Module (SoM)
Equips NVIDIA® Jetson Nano™/ Xavier NX module
Fully support NVIDIA®
Jetson Nano™/ Xavier
NX module
Front I/O
HDMI 2.0 Output
1x HDMI 2.0a/b Type-A supports maximum resolution 3840x2160 at 60Hz
USB 2.0
1x USB 2.0 Micro-B for recovery
USB 3.0
2x USB 3.0 Type-A
10/100/1000 BASE-T
Ethernet
1x GbE RJ-45
8 ports PoE (8x 10/100 MbE RJ-45 PSE, Power Sourcing Equipment, IEEE 802.3
AT/AF with power budget)
SATA Rev. 3.0
1x
Audio
1x Mic-in, 1x Speaker-out
RS-485
1x RS-485 Euroblock (3 pins)
Expansion Header
20 pin with 1x 3.3V UART2, 1x SPI, 1x I2S, 2x I2C
Button
1x Power, 1x Recovery
Internal PCIe
Sockets
Mini-PCIe
Alternative option: 1x Mini-PCIe slot , Only support USB 2.0
(for Wi-Fi/BT card, reserved)
Power
Power Input
54V/2.78A for PoE (PSE, IEEE 802.3 AT/AF with power budget)
Environment
Operating Temperature
-10°C ~ 65°C
fanless chassis
0°C ~ 50°C
Fanless chassis
Nano 75°C
NX-10°C ~ 70°C
Storage Temperature
-20°C ~ 85°C
Relative Humidity
40 °C @ 95%, Non-Condensing
Physical
Characteristics
Chassis Dimension
W:212mm x L:196mm x
H:60mm (W:226 mm with
mounting ears)
W:190mm x L:175mm x
H:80mm (W:225mm with
mounting ears)
W:170mm x L:170mm x
H:4.5mm
Weight
1.25 Kg
4 Kg
269g
Thermal Solution
With fanless chassis
With fanless chassis
(Optional) with fan module
Regulation
EMC/Safety
CE/FCC Class B, KC

11
2.0 Product Overview
2.1 Block Diagram

12
2.2 Top View of Carrier Board

13
Bottom View of Carrier Board

14
2.3 Connector Summary
Designation
Description
J1
RJ45 10/100Mb 4-port Ethernet connector with POE support
J2
RJ45 10/100Mb 4-port Ethernet connector with POE support
J3
RJ45 1Gbsingle-port Ethernet connector
J5
260-pin SODIMM connector for NVIDIA®Jetson Nano/ Xavier NX module
J6
SATA power wafer
J7
Fan wafer
J8
Mic and speaker connector
J9
USB 3.1 Gen 1 2-port connector with 900mA x2
J10
HDMI video output connector
J11
USB2.0 /OTG micro-type connector
J12
RS-485 connector
J13
54V DC power Jack
J14
20-pin header UART console for debug, I2C, GPIO
J16
Mini card for USB only
J17
SATA connector
BT1
RTC battery connector
2.4 Switch Summary
Designation
Description
SW8
Force recovery button
SW9
Power on button
SW10
4-pin DIP switch with four sets of setting as defined in Section 3.20.

15
3.0 Feature Description
3.1 Connector and Switch Locations

16

17
3.2 10/100Mb 4-port Ethernet Connectors
Function
10/100Mb 4-port Ethernet
connectors, used to connect IP
cameras and/or the network
switches.
Location
J1 and J2
Type Description
RJ45*4 with integrated magnetics
for PoE application
Manufacturer and
Part Number
CHAMPWAY, CWJ46614AENL
Mating Connector
Any standard 10/100Mb Ethernet
mating connector can be applicable.
Pinout
Comply with Ethernet standards.
Remarks
POE support is enabled on J1 and J2.
3.3 1Gb single-port Ethernet Connector
Function
1Gb single-port Ethernet connector,
used to connect to the host system.
Location
J3
Type Description
RJ45 with integrated magnetics
Manufacturer and
Part Number
FOXCONN,
JFM38013-0L03-4F-BX3
Mating Connector
Any standard 1Gb Ethernet mating
connector can be applicable.
Pinout
Comply with Ethernet standards.
Remarks
None

18
3.4 260-Pin SODIMM Connector
Function
Used to mount with and connect to
NVIDIA®Jetson Nano/ Xavier NX
module.
Location
J5
Type Description
260-pin SODIMM connector
Manufacturer and
Part Number
FOXCONN, ASAA826-EASB0-7H
Mating Connector
DDR4 SO-DIMM 260PIN 9.2mmH
STANDARD
Pinout
Please refer to NVIDIA Jetson
Nano System-on-Module datasheet
for the pinout details.
Remarks
None
3.5 SATA Power Wafer and SATA Connector
Function
2.5” hard drive/SSD
3.5”surveillance hard drive/SSD
Location
J6 (on the left) and J17 (on the
right)
Type Description
SATA HD power (on the left) and
signal (on the right) connector
Manufacturer and
Part Number
J6:
PINREX, 753-81-04TW00
J17:
FOXCONN, LE18077-Z54B-4H
Mating Connector
4-pin wafer and SATA 3.0
connector
Pinout
J6:
Pin Number
Description
1
5V Power
2
GND
3
GND
4
12V Power
J17: Please refer to SATA 3.0
standard
Remarks
None

19
3.6 Fan Wafer
Function
Fan power and control wafer
Location
J7
Type Description
1*4 pin wafer with 1.25 mm pitch
Manufacturer and
Part Number
Joint Tech,
A1250WV-04PNLNT1N00B
Mating Connector
(Combination with PINREX’s
housing)
Pinout
Pin Number
Description
1
GND
2
5V Power
3
TACH from fan
to module
4
PWM from
module to fan
Remarks
None
3.7 Mic and Speaker Connector
Function
Mic and speaker jack
Location
J8
Type Description
3.5 mm miniature jack
Manufacturer and
Part Number
JKCR, PJD-035-87HAB
Mating Connector
2 or 3 conductors type plug
Pinout
Mic input (on the top) and speaker
output (on the bottom)
Remarks
None

20
3.8 USB 3.1 Gen 1 2-Port Connector
Function
USB 3.1 Gen 1 device connector
Location
J9
Type Description
2-port USB Type-A female
connector
Manufacturer and
Part Number
CHAMPWAY,
CU3B-AFR15U-096H
Mating Connector
Any USB standard Type-A interface
cable or device.
Pinout
Please refer to USB 3.1 Gen 1
standard.
Remarks
Support 900mA x2
3.9 HDMI Video Output Connector
Function
HDMI Type-ATX connector
Location
J10
Type Description
HDMI Type-A female connector
Manufacturer and
Part Number
Compupack, ACNHM220028-001
Mating Connector
Any HDMI standard Type-A
interface cable or device.
Pinout
Please refer to HDMI standard.
Remarks
None
3.10 OTG USB/ Micro-Type Connector
Function
OTG programming recovery
Location
J11
Type Description
USB Micro-type female connector
Manufacturer and
Part Number
Fullglory, FG-MCB-111440
Mating Connector
Any USB standard Micro-type
interface cable or device.
Pinout
Please refer to USB Micro-type
standard.
Remarks
None