Avermedia D315 Series User manual

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 0
AVerMedia D315 series
Applies to NVIDIA®Jetson AGX Orin 32G/64G module
AVerMedia Technologies, Inc.
No. 135, Jian 1st Rd., Zhonghe Dist., New Taipei City 23585, Taiwan
Tel: [phone]
Fax: [phone]
Sales and Marketing: Contact
Technical Support: Professional User

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 1
Table of Contents
1.0 Introduction............................................................................................. 8
1.1Product Specifications __________________________________________________9
1.2Product Overview _____________________________________________________ 10
Block Diagram ____________________________________________________________ 10
Front View and Back View of Carrier board ___________________________ 10
1.3Connector Summary__________________________________________________ 12
1.4Carrier Board Interface ______________________________________________ 13
2.0 Feature Description............................................................................... 16
2.1Jetson module Connector_____________________________________________ 16
2.2Fan Power connector__________________________________________________ 16
2.3RTC Battery Connector ______________________________________________ 17
2.4HDMI OUTPUT ______________________________________________________ 17
2.5USB 3.2 Gen 2 Type-A Connector #1 , #2 ___________________________ 17
2.6M.2 E key 2230 ________________________________________________________ 18
2.7M.2 M key 2280 _______________________________________________________ 18
2.8USB 2.0 Micro B Connector__________________________________________ 18
2.9Micro SD Card Slot ___________________________________________________ 19
2.10 10 Gigabit Ethernet Connector____________________________________ 19
2.11 40-Pin expansion header ___________________________________________ 20
2.12 Audio pin header ___________________________________________________ 22
2.13 Gigabit Ethernet Connector _______________________________________ 22

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 2
2.14 Micro SIM Card Socket____________________________________________ 23
2.15 Mini card socket ____________________________________________________ 23
2.16 OOB board connector______________________________________________ 24
2.17 54V DC POWER JACK____________________________________________ 25
2.18 ATX 4P ______________________________________________________________ 25
2.19 USB 2.0 Gen 1 Type-A Connector #1 , #2_________________________ 26
2.20 12V power input connector for daughter board__________________ 26
2.21 PCIE x16 socket_____________________________________________________ 27
2.22 Board to board connector (to Camera board)____________________ 27
2.23 CAN Bus 3-pin terminal block with transceiver _________________ 27
2.24 Debug port __________________________________________________________ 28
2.25 Switch Button _______________________________________________________ 28
2.26 Power &Recovery Button__________________________________________ 29
3.0 Installation............................................................................................. 30
3.1BSP Setup Instructions _______________________________________________ 30
4.0 Software................................................................................................. 31
5.0 Force Recovery Mode............................................................................ 35
6.0 Accessory Drawings .............................................................................. 36
6.1Fan Module/ Adapter/ Power Cord__________________________________ 36

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 3
Preface
Disclaimer
The information contained in this user manual, including but not limited to any product
specification is subject to change without notice. AVerMedia assumes no liability for any
damages incurred directly or indirectly from any technical or typographical errors or omissions
contained herein or for discrepancies between the product and the user manual.
Technical Support
If you experience the difficulty after reading this manual and/or using the product, please contact
the reseller from which you purchased the product. In most cases, the reseller can help you with
the product installation and the difficulty you encountered.
In case the reseller is not able to resolve your problem, our highly capable global technical
support team can certainly assist you. Our technical support section is available 24 hours a day
and 7 days a week through our website, with the click here. For more contact information, you
may find it in the section of AVerMedia Global Offices.
Contact Enquiry
For more information of our products, pricing, and order placement, please fill in our inquiry
form here, we will contact you within 24 hours.
Download User Manual
Please click the link here to download the file of this user manual from AVerMedia website.
Revision History
Revision
Date
Updates
V01
Sep 29, 2022
1st Released
V02
Nov 08, 2022
Update specification

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 4
AVerMedia Global Offices
https://www.avermedia.com/professional/contact

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 5
Limited Product Warranty
AVerMedia provides the one-year product warranty. Should this product, in AVerMedia's
opinion, fail to be in the good working order during the warranty period, AVerMedia will, at its
option, repair or replace it at no charge, provided that the product has not been subjected to abuse,
misuse, accident, disaster, or non-AVerMedia authorized modification or repair.
You may obtain the warranty service by delivering this product to an authorized AVerMedia
business partner or to AVerMedia along with the proof of purchase. Product returned to
AVerMedia must be pre-authorized byAVerMedia with an RMA (Return Material Authorization)
number marked on the outside of the package and sent prepaid, insured, and packaged for the safe
shipment. AVerMedia will return the product by prepaid shipment service.
It is not recommended to disassemble the box PC, which will impact the warranty. The limited
product warranty is only valid over the serviceable life of the product. This is defined as the
period during which all components are available. Should the product prove to be irreparable,
AVerMedia reserves the right to substitute an equivalent product if available or to retract the
product warranty if no replacement is available.
The above product warranty is the only warranty authorized by AVerMedia. Under no
circumstances will AVerMedia be liable in any way for any damages, including any lost profits,
lost savings, or other incidental or consequential damages arising out of the use of, or inability to
use, such product.
Copyright Notice
The information contained in this document is subject to change without notice. AVerMedia shall
not be liable for errors contained herein or for incidental consequential damages in connection
with the furnishing, performance, or use of this material. This document contains proprietary
information that is protected by copyright. All rights are reserved. No part of this document may
be photocopied, reproduced, or translated to another language without the prior written consent
by AVerMedia.

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 6
Trademark Acknowledgement
AVerMedia acknowledges all the trademarks, registered trademarks, and/or copyrights referred to
in this document as the property of their respective owners. Not listing all possible trademarks or
copyright acknowledgments does not constitute the lack of acknowledgment to the rightful
owners of the trademarks and copyrights mentioned in this document.
ESD Warning
Electronic components and circuits are sensitive to Electrostatic Discharge (ESD). When
handling any circuit board assemblies including AVerMedia AVerMedia products, it is highly
recommended that ESD safety precautions can be observed. ESD safe best practices can include,
but are not limited to the following ones.
1. Leave the circuit board in the antistatic package until it is ready to be installed.
2. Use a grounded wrist strap when handling the circuit board. At a minimum, you need to touch
a grounded metal object to dissipate any static charge, which may be present on you.
3. Avoid handling the circuit board in the carpeted areas.
4. Handle the board by the edges and avoid the contact with the components.
5. Only handle the circuit boards in ESD safe areas, which may include ESD floor and/or table
mats, wrist strap stations, and ESD safe lab coats.

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 7
Safety Precaution:
1. All cautions and warnings on the device should be noted.
2. For safety consideration, do NOT open the device if not a qualified service stuff.
3. Place the device on a solid surface during installation to prevent falls.
4. Keep the device away from humidity.
5. Do NOT leave this device in an un-controlled environment with temperatures beyond the
device’s permitted storage temperature to avoid damage.
6. All adaptors and cables supplied by AVerMedia are verified. Do NOT use any others not
supplied by AVerMedia to avoid any malfunction or fires.
7. Make sure the power source matches the power rating of the device.
8. Place the power cord where people cannot step on it. Do not put anything on the power cord.
9. Always completely disconnect the power while the device is not usage or idle for a long time.
10. Disconnect the device from any AC supply before cleaning. While cleaning, use a damp cloth
instead of liquid or spray detergents.
11. Make sure the device is installed near a power outlet and easy for accessible.
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out the heatsink or heat spreader of the device when the system is running.
14. Never pour any liquid into the openings. This could cause fire or electric shock.
15. The static electricity should be noted while installing any internal components. Consider to
use a grounding wrist strap and put all electronic parts in static-shielded containers.
If the following situations occur, please contact our service personnel:
(1) The device is dropped or damaged
(2) Damaged power cord or plug
(3) Exposure to moisture
(4) Liquid intrusion into the device
(5) Any obvious signs of damage displayed on the device
(6) Device is not working as expected or in a manner as described in this manual

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 8
1.0 Introduction
AVerMedia AVerMedia D315/D315AO/D315AOB include fully featured carrier board which is
all developed for NVIDIA®Jetson AGX Orin 32G/64G modules. D315/D315AO/D315AOB
provide multiple I/O include one 4Kp60 HDMI video output, two USB 3.2 ports, one GbE, one
10G RJ-45 port, 40-pin expansion, one M.2 Key E, one M.2 key M.
Operating with NVIDIA®Jetson AGX Orin 32G/64G modules and the rich I/O functions,
AVerMedia D315/D315AO/D315AOB is the perfect choice for high-end performance AI edge
computing platform for intelligent video analytics applications.

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 9
1.1 Product Specifications
NVIDIA Jetson
SoM
NVIDIA® Jetson AGX Orin™module (32GB or 64GB)
Networking
•1x GbE RJ-45
•1x 10G RJ-45
•1x M.2 E key (for Wi-Fi 6E)
Display Output
1x HDMI 2.1 (8K60)
Temperature
Operating temperature( TBD):
-25°C~85°C (D315), -25°C~70°C (D315AO) and -25°C~65°C
(D315AOB)
Storage temperature -40°C ~ 85°C
Relative humidity 40 °C @ 95%, Non-Condensing
MIPI & SerDes
Camera (120-pin)
GMSL2/FPD-link III/V-by-One® HS (optional)
USB
•1x USB 2.0 Micro-B for recovery
•2x USB 2.0 Type-A
•2x USB 3.2 Type-A
Audio
Intel HD Audio analog connector
Storage
1x micro-SD card slot
Expansion Header
•40-pin (UART, SPI, CAN, I2C, I2S, GPIOs )
•1x M.2 M key (for SSD or AVerMedia capture card: CL312H1,
CN311-H, CN312SW, CN312MW)
•1x Micro SIM socket
•1x mPCIe (for 4G LTE module or 5G module via adapter card)
•1x PCIe x16 (only support x8 PCIe lane)
•1x CAN bus with transceiver
•120-pin (for MIPI SerDes)
Input Power
•DC in jack on board: 54V/2.78A adapter, DC Range
12~54V(7~1.95A)
•ATX 4-pin: 12~54V (10.8~2.4A)
Power Cord
US/JP/EU/UK/TW/AU/CN
Thermal Solution
Heat sink with fan (optional)
Buttons
Power and Recovery
RTC Battery
Support RTC Battery and Battery Life Monitoring by MCU
Dimensions
D315: 141.5mm (W) x 133.5mm (L) x 29mm (H)
D315AO: 141.5mm(W) x 133.5mm(L) x 63mm(H)
D315AOB: 181.5mm (W) x 137mm (L) x 88mm (H) (with mounting
hole)
Certifications
CE, FCC, KC (To be applied

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 10
1.2 Product Overview
Block Diagram
AGX
Orin

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 11
Front View and Back View of Carrier board

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 12
1.3 Connector Summary
J1
699-pin high-speed/high-density connector
J2
Fan Wafer
J3
External RTC Battery wafer
J4
HDMI output Type-AVertical Side Connector (Female)
J5
USB 3.2 Gen2 Dual Port Type AConnector
J6
M.2 E-Key Socket
J7
M.2 M-Key Socket
J8
USB 2.0 Micro B Connector
J9
Micro SD Card Socket (Push-Push)
J13
10 Gigabit Ethernet Connector w/LEDs
J14
40-pin Expansion
J15
Audio 9-pin header
J16
Gigabit Ethernet Connector w/LEDs
J17
Micro SIM card socket (Push-Push)
J22
Mini card socket
J26
OOB board connector (5V)
J27
OOB board connector (Reset)
J28
OOB board connector (Power)
J30
DC power Jack with Lock
J31
Input Power –4.2mm Pitch 90°ATX Power 4P
J33
USB 2.0 Gen1 Dual Port Type AConnector
J37
DC 12V connector for daughter board
J38
PCIE x16 socket
J60
120-pin high speed board to board connector (to Camera board)
BJ3
CAN bus 3-pin terminal block with transceiver

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 13
1.4 Carrier Board Interface
Top View Interface
J1
699-pin high-speed/high-density connector
J2
Fan Wafer
J3
External RTC Battery wafer
J8
USB 2.0 Micro B Connector
J1
J8
J2
J3

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 14
Bottom View Interface
J4
HDMI output Type-AVertical Side Connector (Female)
J5
USB 3.2 Gen1 Dual Port Type AConnector
J6
M.2 E-Key Socket
J7
M.2 M-Key Socket
J9
Micro SD Card Socket (Push-Push)
J13
10 Gigabit Ethernet Connector w/LEDs
J14
40-pin Expansion
J15
Audio 10pin header
J16
Gigabit Ethernet Connector w/LEDs
J17
Micro SIM card socket (Push-Push)
J22
Mini card socket
J26
OOB board connector (5V)
J27
OOB board connector (Reset)
J28
OOB board connector (Power)
J30
54V DC power Jack with Lock
J17
J33
BJ3
J9
SW1
J26
J28
J27
BSW3
BSW1
J37
J31
J30
J5
J16
J13
J4
J15
J14
JP8
J6
J7
J22
J60

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 15
J31
Input Power –4.2mm Pitch 90°ATX Power 4P
J33
USB 2.0 Gen1 Dual Port Type A Connector
J37
12V Power input for sub board
J38
PCIE X16 connector
J60
2x60 pin high speed board to board connector (to Camera board)
BJ3
CAN bus 3-pin terminal block with transceiver
JP8
Debug port
SW1
Switch Button
BSW1
Power Button w/LEDs
BSW3
Recovery Button w/LEDs
J8
J17
J33
BJ3
J9
SW1
J26
J28
J27
BSW3
BSW1
J37
J31
J30
J5
J16
J13
J4
J15
J14
JP8
J6
J7
J22
J60

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 16
2.0 Feature Description
2.1 Jetson module Connector
Function
Provide connection with NVIDIA®
Jetson™ AGX Xavier™ module
Location
J1
Type Description
MOLEX 699pin socket
Manufacturer
and Part Number
MOLEX,203456-0003
Mating
Connector
MOLEX,203456-0003
Pinout
Please refer to NVIDIA Jetson™ AGX
Orin™ and AGX Orin™
System-on-Module datasheet for pinout
details.
Remarks
https://developer.nvidia.com/ embedded/downloads
2.2 Fan Power connector
Function
Fan Power Connector
Location
J2
Type Description
WAFER_1*4PIN_1.25 ㎜_90°
Manufacturer
and Part Number
ACES 50271-0040N-001_BLACK
Mating
Connector
ACES 50276-004H0H0-001
Pinout
Pin #
Description
PIN 1
GND
PIN 2
+12V Power
PIN 3
FAN_TACH
PIN 4
FAN_PWM
Remarks
None

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 17
2.3 RTC Battery Connector
Function
RTC battery for module
Location
J3
Type Description
2.0mm wire-to-board header 02P type
Manufacturer
and Part Number
Pinrex, 721-94-02TWR9
Mating
Connector
Tyu, TU2001HNO-02
Pinout
Pin #
Description
PIN1
3V Power
PIN2
GND
Remarks
RTC Battery:, CR2032 3V
2.4 HDMI OUTPUT
Function
HDMI output connector
Location
J4
Type Description
HDMI Type-A female connector
Manufacturer and
Part Number
捷湧 EDL TECHNOLOGY CO.
HM-FVD480B
Mating Connector
Any HDMI standard Type-A interface
cable or device.
Pinout
Please refer to HDMI standard.
Remarks
None
2.5 USB 3.2 Gen 2 Type-A Connector #1 , #2
Function
USB 3.2 Gen 2 Type-A connector #1 #2
Location
J5
Type Description
Dual-port USB 3.2 Gen 2 Type-A female
connector
Manufacturer and
Part Number
冠泰 Champway
CU3B-AFR15U-096H
Mating Connector
Any USB 3.2 Gen 2 standard Type-A
interface cable or device.
Pinout
Please refer to USB 3.2 Gen 2 standard.
Remarks
None

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 18
2.6 M.2 E key 2230
Function
M.2 E key
Location
J6
Type Description
SOCKET_M.2-KEY E_75PIN_90°_SMD
Manufacturer
and Part Number
宏致_ACES
51748-07502-005_P0.5 ㎜-H8.5 ㎜
Mating
Connector
Any M.2 E key 2230 card standard interface
device.
Pinout
Please refer to M.2 E key card standard for
the pinout details.
Remarks
None
2.7 M.2 M key 2280
Function
M.2 M key
Location
J7
Type Description
SOCKET_M.2-KEY
M_75PIN_90°_SMD
Manufacturer and
Part Number
宏致_ACES
51757-0750C-012_P0.5 ㎜-H5.5 ㎜
Mating Connector
Any M.2 M key 2280 card standard
interface device.
Pinout
Please refer to M.2 M key card standard
for the pinout details.
Remarks
None
2.8 USB 2.0 Micro B Connector
Function
BSP Installation as recovery mode
Location
J8
Type Description
USB micro-type B female connector
Manufacturer
and Part Number
褔軒 Fullglory
FG-MCB-111440
Mating
Connector
Any USB standard Micro-type interface
cable or device.
Pinout
Please refer to USB Micro-type standard.
Remarks
None

D315 User Manual AVerMedia Technologies, Inc www.avermedia.com 19
2.9 Micro SD Card Slot
Function
Micro SD Card
Location
J9
Type Description
SOCKET_MICRO SD
CARD_9PIN_90°_SMD
Manufacturer and
Part Number
褔軒 Fullglory
FG-0011BAAS09A
Pinout
Refer to MicroSD card standard
Remark
Push-Push
2.10 10 Gigabit Ethernet Connector
Function
10 Gb single-port Ethernet connector,
used to connect to the host system.
Location
J13
Type Description
RJ45 with integrated magnetics
Manufacturer and
Part Number
志展 Compupack(CPC)
ACNRJJA0001-006
10G-LEFT(G/Y)+RIGHT(Y)-UP
Mating Connector
Any standard 10Gb Ethernet mating
connector can be applicable.
Pinout
Comply with Ethernet standards.
Remarks
None