Avermedia ER330 User manual

1
ER330 How can I ensure my schedule recording runs
properly (The version of MCU needs to be up to date)
1. If you have issues when you are using schedule recording, you need to update
the version of MCU
2. You need to have a USB thumb driver (32G or below), and format to FAT 32 。
Need to choose FAT32

2
3. Please install the boot file from the below link, and drag the boot file to your USB
thumb drive
https://reurl.cc/6LYNNZ
3 Please remove all ports connected from ER330( Power, HDMI in, HDMI out,
Micro SD card, USB port)
3-1 Connect your USB thumb drive first
3-2 Connect your Power cord, you will see the flash blue LED light
3-3 The LED light will become constant when you finish updating MCU
（Flash blue light -> Constant blue light）
https://www.youtube.com/watch?v=BRPHq2dqcWo
3-4 Unplug your USB thumb drive
3-5 Unplug the power cord of ER330.
3-6 The version of MCU should be up to date
4 Reboot ER330，Go into“Setting”->“Product information”you can see the
version of MCU(b1.1.8.13)( Notes: Please remind the boot file when you update the
version of MCU)