Avermedia AVerGrabber CN312S User manual

Quick Guide
AVerGrabber CN312S
CN312S
CN312SW (Wide Temperature)
CN312SC (Wide Temperature with Conformal Coating)

3
Disclaimer
All the images in this documentation are examples only. The images may vary depending on the product and
software version. Information presented in this documentation has been carefully checked for reliability; however,
no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change
without notice.
Copyright and Trademark Information
©2019 by AVerMedia Technologies, Inc. All rights reserved. No part of this publication, in whole or in part, may be
reproduced, transmitted, transcribed, altered or translated into any language in any form by any means without
the written permission of AVerMedia Technologies, Inc. Information and specication contained in this manual are
subject to change without notice and do not represent a commitment on the part of AVerMedia.
For more information, please refer to www.avermedia.com. "AVerMedia" is trademark or registered trademark of
AVerMedia Technologies, Inc.The pictures contained in this manual are provided for reference purposes only. Made
in Taiwan (except accessories).
Headquarters
Address No.135, Jian 1st Rd., Zhonghe Dist., New Taipei City 23585, Taiwan
Website http://www.avermedia.com
Telephone [phone]

4
US Ofce
Address 4038 Clipper Ct., Fremont, CA 94538
Website www.avermedia-usa.com
Telephone [phone]
Europe Ofce
Address Hanauer Landstrasse 291 B, 60314 Frankfurt Hessen, Germany

5
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Follow all instructions.
4. Heed all warnings.
5. Do not use the apparatus on uneven or unstable surfaces.
6. Do not use this apparatus in a wet environment or near water.
7. Unplug the apparatus before cleaning. Clean only with a dry cloth.
8. Use in a well ventilated environment. Do not block any ventilation openings.
9. Use the apparatus within ambient temperatures -4–158°F / -20–70°C (with 0.5 m/s airow).
10. Use power sources within the specied voltage range.
11. Do not place heavy objects on the apparatus.
12. Do not install near heat sources such as radiators or stoves.
13. Do not defeat the safety purposes of the polarized or grounding-type plug.
14. Protect the power cord from being walked on or pinched, particularly where the cord connects with plugs or adapters.
15. Only use the attachments and accessories specied by the manufacturer.
16. Unplug this apparatus during lightning or when unused for prolonged periods of time.
17. Do not modify or disassemble the apparatus in any way.
18. Refer all servicing to AVerMedia Customer Service.
19. Do not dispose the apparatus as general household waste. Dispose in accordance with local environmental laws.

6
AVerGrabber CN312S Quick Guide
Quick Guide
M.2 Connector
Heat SinkU.FL Connectors
BNC Cable x 2 Hex Nut x 2
Lock Washer x 2
Package Contents
These are what you’ll nd in the box:

7
Software Development Kit
The SDK for AVerGrabber CN312S can be downloaded here:
http://q.avermedia.com/CN312S_SDK Scan this QR
code for more
information.
Installation

8
Specications
Host Interface Gen2 x 2
Audio Format SDI embedded audio
Audio Sampling Rate 48 KHz
Connector Type BNC for SDI
Input Interface 2-channel 2K SDI
Video Format
Driver support output:
4:2:0 8-bit : NV12, I420, YV12
4:2:2 8-bit : YUY2
4:4:4 8-bit: IYU2, BGR24, BGR32
SDK support output:
4:2:0 8-bit : YV12
4:2:28-bit : YUY2
4:4:4 8-bit: BGR24
Color Depth 8-bit (support 10-bit video input)
Channel No. 2 channels
Max. Input Res. 2048 x 1080 @ 60fps
Max. Capturing
Resolution
1920 x 1080 @ 60fps (2-channel)
Encoding Mode Software encoding
Multi-Card Support Yes
Supported OS Windows 7 / 8.1 / 10 (32 / 64 bit)
Linux (based on V4L2, support x86, x64)
Operating Temp. -20–70°C / -4–158°F
(with 0.5 m/s airow)
Storage Environment Temperature: -40–85°C / -40–185°F
Humidity: 0–95% relative humidity
Form Factor M.2 (M Key)
Power 3.3 W
Weight 37.5 g (1.32 oz)
Dimensions W 22 x D 80 x H 26.3 mm
Note: Specications are subject to change without prior notice.
Please refer to our website for the latest details.

9

1 0

1 1

1 2
FCC NOTICE Class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Federal Communications Commission Statement
NOTE - This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by tuning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/television technician for help.

1 3
European Community Compliance Statement Class B
This product is herewith conrmed to comply with the requirements set out in the Council Directives on
the approximation of the laws of the Member States relating to Electromagnetic Compatibility (EMC)
Directive 2014/30/EU.
Waste Electrical and Electronic Equipment
The mark of crossed-out wheeled bin indicates that this product must not be disposed of with your
other household waste. Instead, you need to dispose of the waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic equipment. For more
information about where to drop off your waste equipment for recycling, please contact your household
waste disposal service or the shop where you purchased the product.
CAUTION ON MODIFICATIONS
To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules, this
device must be installed in computer equipment certied to comply with the Class B limits. All cables
used to connect the computer and peripherals must be shielded and grounded. Operation with non-
certied computers or non-shielded cables may result in interference to radio or television reception.
Changes and modications not expressly approved by the manufacturer or registrant of the equipment
can void your authority to operate the equipment under Federal Communications Commission rules.

1 4
CAN ICES-3 (B)/NMB-3 (B)
Canada - Canada Industry Canada (IC) Labelling Requirements
Every manufacturer or importer shall ensure import or before offering for sale, as appropriate, that each
unit of the type that they offer for sale bears, in alocation convenient for inspection, a permanent label or
marking containing (in French and English), the following statement:
ICES-003 (Interference - Causing Equipment Standards)
"This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada."

C a p t u r e C a r d
M o d e l N o . : C N 3 1 2 S
P/N: 300ACN312EBE
M A D E I N T A I W A N

www.avermedia.com