Avision FB1000N User manual

Color Image Scanner
Getting Started Guide
Trademarks
Microsoft is a U.S. registered trademark of Microsoft Corporation.
Windows, Windows XP, Windows Vista, Windows 7 and Windows
8 are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Other brands and product names herein are trademarks or
registered trademarks of their respective holders.
Copyright©2015 Avision Inc. All rights reserved.
English

ii
Table of Contents
1. Installing the Scanner .................................. 1
1.1 Checking the Package Contents ............................. 1
1.2 Installing the scanner driver.................................. 2
1.3 Connecting to computer ....................................... 2
2. Completing Your First Scan........................... 4
2.1 Placing Your Original ............................................ 4
2.2 Verifying Your Scanner Installation......................... 5
2.3 A Glance of the Scanner Properties Dialog Box......... 6
3. Maintaining Your Scanner ..............................7
3.1 Cleaning the Glass ................................................7

1
1. Installing the Scanner
1.1 Checking the Package Contents
Gently open your box and check the package contents. If there
is anything missing or damaged, please call your dealer.
1. Scanner main unit
2. USB cable
3. Software CD/Quick guide
1
3
2

2
1.2 Installing the scanner driver
NOTE:
To ensure your computer can identify the USB scanner, please
install scanner driver first before connecting the scanner to your
computer.
1. Place the supplied CD-ROM onto your CD-ROM drive.
2. The software installation graphic appears. If not, run
“setup.exe”.
3. Click Install Scanner Driver to install the scanner driver
on your computer.
1.3 Connecting to computer
1. Connect the square end of the USB cable to the USB port of
your scanner. Connect the rectangle end to the USB port at
the rear side of your computer.

3
2. The computer should detect a new USB device and prompt a
“New Hardware Found” message.
3. By following the on-screen instructions, click the Next
button to continue. When the certification screen appears,
click Continue Anyway to complete the installation.
4. When the Finish dialog is prompted, click the Finish button.

4
2. Completing Your First Scan
2.1 Placing Your Original
1. Open document cover.
2. Place your document with your text FACE DOWN on the
glass.
3. Make sure the upper left corner of your original near the
home position as marked in the scanner.
1. Document Cover
2. Home Position
3. Document
4. Glass
2
4
1
3

5
2.2 Verifying Your Scanner Installation
To verify if your scanner installation is correct, Avision provides
you a useful test program called Avision Capture Tool. With this
tool, you can perform simple scans and view the captured
images. In addition, it helps you complete your scan at a rated
speed.
Before you begin, be sure the scanner is on.
1. Select Start>Programs>Avision xxxx Scanner>Avision
Capture Tool (xxxx: scanner model).
The Select Scanner Model dialog box will be displayed.
2. Select your driver type and scanner model and click OK.
The Avision Capture Tool dialog box will be displayed.
3. In the Scan Validation dialog box, click the Scan button
() or choose Scan from the File menu.
4. The document will be scanned and displayed in the Scan
Validation screen. After the scanned images have been
displayed, your scanner installation verification is completed.

6
2.3 A Glance of the Scanner Properties Dialog Box
1. Tab Options
Choice: Image, Compression, Color
Dropout, Paper, Multi-Feed Detection,
Preview, Options, Settings, Information.
2. Image
Selection
Box
Choose your image type and the side of
document you wish to scan. Options vary
based on type of scanner.
3. Brightness Adjust the brightness level from –100 to
+100.
4. Contrast Adjust the contrast level from –100 to +100.
5. Resolution Determine the quality of the scanned image.
The industry standard is 200 dpi.
6. Invert Reverse the color of your scanned image.
7. Scan Source Choice: Auto Document Feeder, Flatbed,
Flatbed (Book), Automatic (varies due to
different scanner model)
8. Defaults Reset all values on the tabs to the factory
default settings.
3
4
5
6
7
1
2
8

7
3. Maintaining Your Scanner
3.1 Cleaning the Glass
The Cleaning Procedures
1. Moisture a piece of soft cloth with some isopropyl alcohol.
(95%)
2. Open the document cover as shown below.
3. Gently wipe the document glass.
4. Close the document cover. Your scanner is now ready
for use.