AVLink HX-1522W User manual

2*2 HDMI MATRIX
HX-1522W
USER MANUAL V1.0
HX-1522W
Package Co te ts-
 1x HX-1522W Unit
 1x User Manual
 1x Power Adapter DC 12V with Lo k
 1x Remote Controller with Battery
 2x S rews
 4x Foot Pads
Anything missed, please onta t with your vendor.
Features
 2 HDMI inputs and 2 HDMI outputs matrix
 Support high-resolution display up to 4Kx2K@60Hz
(YCbCr 4:2:0 8/10/12/16-bit, RGB/ YCbCr444 only
8-bit)
 Supports 3D pass-through
 HDCP2.2/HDCP1.4 Compliant
 EDID Copy from OUT port 1
 Supports IR remote ontrol
 Supports RS-232 ontrol
-1-
Specificatio s
Fu ctio HX-1522W
HDMI In
Conne tor HDMI A-Type Female x 2
HDMI Out
Conne tor HDMI A-Type Female x 2
IR In 3.5ψ Stereo Ja k x 1
RS-232 Port 9 Pin Female D Type Conne tor
Baud Rate 9600 bps; 8 data bits, 1 stop bit,
no parity
Max. Resolution
4K x 2K
Power Adapter
(Min.) DC 12V with Lo k
Housing Metal
Dimensions
(LxWxH) 150 x 80 x 25 mm
Weight 294g
FRONT VIEW
1. HDMI IN1
2. HDMI IN2
3. IR IN
REAR VIEW
1. DC JACK
2. RS-232
3. HDMI OUT2
4. HDMI OUT1
-2-
TOP VIEW
1. TACK SWITCH
2. LED
3. IR2
I stallatio
1. Turn off the HDMI sour e and HDMI display.
2. Conne t the HDMI able between the HDMI sour e and
the “HDMI IN1 or IN2” port of HX-1522W.
3. Conne t the HDMI able between the HDMI display and
the “HDMI OUT1 or OUT2” port of HX-1522W.
4. Turn on the HDMI sour e and display.
5. Sele t sour e by TACK SW, IR or RS-232
Operatio
1. Key button Of Top Unit
Press OUT1 Key: Change Output1 Link Input Port
Press OUT2 Key: Change Output2 Link Input Port
2. Remote Controller
Press Key “1” : Change Output1 Link Input Port
Press Key “2” : Change Output2 Link Input Port
All manuals and user guides at all-guides.com

-3-
(Optio al) IR Receiver Cable
I stall
Put it into the HX-1522W “IR IN” port and pla e the IR
Re eiver Cable, so that you an point to it easily with your
IR remote ontroller.
RS-232 Co trol
Conne t the RS-232 able between the PC and the
“RS-232” port of HX-1522W.
Key in the ommand you an hange sour e to output
Command List:
“route 1 1“ OUT1IN1
“route 1 2“ OUT1IN2
“route 2 1“ OUT2IN1
“route 2 2“ OUT2IN2
“Help” Display ommand List
-4-
Additio al Optio
Sele t any additional options you may require.
1. IR Re eiver Cable
Tech ical Specificatio s Output Sig al
Pi #
Sig al Pi #
Sig al
1 TMDS Data 2+ 11 TMDS Clo k Shield
2 TMDS Data 2 Shield 12 TMDS Clo k -
3 TMDS Data 2- 13 CEC
4 TMDS Data 1+ 14 Reserved
(N.C. on devi e)
5 TMDS Data 1 Shield 15 SCL
6 TMDS Data 1- 16 SDA
7 TMDS Data 0+ 17 DDC/CEC Ground
8 TMDS Data 0 Shield 18 +5V Power
9 TMDS Data 0- 19 Hot Plug Dete t
10 TMDS Clo k+
© AV LINK GROUP LTD., All rights reserved.
Trademarks:
All the ompanies, brand names, and produ t names
referred to this manual are the trademarks or registered
trademarks belonging to their respe tive ompanies.
-5-
All manuals and user guides at all-guides.com