www.avsl.com 128.841UK User Manual
Connection Instructions:
•Using an HDMI cable of the required length, connect one end to the output port of the switch and the
other up to the HDMI input of your display device. NOTE: to maintain 4K resolution, always use 4K
certified HDMI leads.
•Then using up to 3 additional HDMI cables connect your source devices to the input ports on the switch.
NOTE: 16m maximum combined cable length for 4K @ 30Hz or FHD signals and 8m maximum combined
cable length for 4K @ 60Hz signals.
•Connect the 5V power adaptor supplied to the unit and switch on.
•The switch inputs can now be selected using either the remote control provided or the “Select”switch on
the front of the unit.
•When connected source devices are powered on, the switch has an auto select feature which will select
the latest live device.
•The blue input LED’s on the front of the switch will indicate which device is live at any one time.
In The Box:
1. HDMI Switch 3x1
2. IR Remote Control
3. 5V DC Power Adaptor
4. User Manual
Warning:
•For reasons of electrical safety this device must never be immersed in water, exposed to damp conditions
or excessive force.
•Please do not use this device if you find that it is damaged in any way and only use the power supply
provided by the manufacturer.
•When not in use for long periods please disconnect the power supply from the mains.
•Do not attempt to repair this device or take apart under any circumstances, as this will invalidate your
warranty.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at
the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2022 AVSL Group Ltd, Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House,
Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.