Avtech AVC647 User manual

1
2
Thankyou forchoosing thishigh qualitycamera, beforeattempting toconnect oroperatethisproduct,
pleaseread theseinstructionscompletelythe instruction carefully.
COLORCCTVCAMERAOPERATINGMANUAL
SPECIFICATION
Pick up Element 1/3 ColorCCD image sensor
Number ofPixel768(H)x494(V) <NTSC>/ 752(H)x582(V) <PAL>
Resolution 480 TVlines
Min. Illumination 1Lux/ F2.0; 0Lux(10 meterIRON)
S/NRatio Morethan 48dB(AGCoff)
ElectronicShutter 1/60(1/50)to1/100,000 sec.
Gamma Correction 0.45
WhiteBalance Autowhitebalance
AGCYes
Standard Board Lensf4.0mm / F2.0, f6.0mm / F2.0, f8.0mm / F2.2selectable
LensAngle 78o/ 54o/ 39o
Video Output 1.0Vp-pcomposite, 75
Power Source DC12V+ 10%
CurrentConsumption 80mA(IROFF), 260mA(IRON)
Water Resistance IP57
IRLED 12 unitsInfrared LED
Effective Range Over10 Meters
WARNING:
1.Pleaseusecorrectpoweradaptor,DC12V(regulated)tooperatethisunit.It’
snotrecommendedtouseinputDC
p
owervoltagelargerorless thanDC12V.IftheinputDC powervoltageislargerthanDC12V,itmayreducetheIR
LEDlife. If theinput DC powervoltageisless than DC12V, it mayreducetheIRLEDeffectivedistance.
2. Toprevent fireorelectricshock hazard, donot exposethisappliancetorainormoisture.
3.
Theapparatusshallnotbeexposedtodrippingorsplashing andthatno objectsfilledwithLIQUIDS,suchas
vases, shall beplacedon theapparatus.
General
Thisisa1/3 ColorCCD video cameraemploysa1/3 High Resolution Colorcharge coupled device
solid-stateimaging devicewhichprovide extremelylonglifeand high reliability.Thecameraoffersexcellent
reproducibilitywithlowlag and high burnresistance,and isnotsubject todistortion frommagneticfieldsand
the camerafunctionsreliabilityinwide temperaturerange.
Features
l 1/3 High Resolution ColorCCD image sensor
l 480 TVlines.
l 1Lux/ F2.0, 0Lux(10 meterIRON).
l WaterResistance: IP57
l IRLED: 12 unitsInfrared LED
l EffectiveRange: Over10 Meters
l AutomaticIRtrigger-on underlowillumination
l AutomaticIRoffundernormalillumination
Majoroperating controlsand functions
647-V1.1
9

1.DC12VInputTerminal
Thisterminalisforconnecting the 12VDC regulated powersupplycord.
2.Video Output Connector(VIDEO OUT)
Thisisconnectorisforconnecting withthe VIDEO INconnectorofthe video monitor.
Connections
1.Connect avideo terminalofthe camera(VIDEO)and the video inputterminalofthe video monitorwitha
75 coaxialcable.
2.Connect the powerterminalofthe cameratoa12VDC regulated powersupply.
StandardAccessories
1. MainBodyx1pc
2. Bracket x1pc
3. Instruction manualx1pc.
1.Pleaseusecorrect poweradaptor, DC12V(regulated), tooperatethisunit. The
powertoleranceof thisunit isDC 12V ±10% (DC10.8V~13.2V), overmaximum
DC13.2Vpowerinput will damage thisunit.
2.Video output (BNC connector) ofthisunit can be onlyconnected tomonitor. Please
check the wiring ofvideo output beforepoweron.Ifthe powerisoffered through
video output, the unit will be damaged.
1. 使用正確電源供應器 (DC12V 穩壓 ), 此產品可使用電壓範圍為 DC 12V ±10%
(DC10.8V~13.2V), 超過 DC13.2V 會損壞此機器。
2. 此產品 Video BNC 接頭直接接監視器 , 在提供電源前 , 確認接線正確性。
若電源
自 “Video BNC 接頭處輸入會損壞此產品。
1. 機に使用する電源装置はＤＣ１２Ｖ ±10% (DC10.8V~13.2V)
の安定化電源をお使い
下さい。 13.2V 以上の電圧を加えると 装置が破損いたします。
2. 装置の映像出力 (BNC 接栓 )
は、電源を入れる前にモニターに接続されている事を確
認して下さい。もし、電源が加わると破損する可能性があります。
1.Porfavoruseel correctoadaptadorde energíaeléctricaDC12V(regulado)para
operarestaunidad,La tolerancia de energíade estaunidad esde DC12V±10%
(DC10.8V~13.2V).Sobrepasarel máximode DC13.2Vde la potencia de entrada
dañaraestaunidad.
2.La potencia de salida del video (ConectorBNC)de estaunidad puede solo ser
conectado al monitor.Porfavorreviseloscablesdel video a
ntesde encenderlo. Si
la energíaesdada porla potencia de salida del video, la unidad sedañara.
1.Bitteschließen Sie dasGerät mit demNetzgerät (DC12V) an. Die Tolerazder
Stromversorgung ist 12VDC ±10% (DC10.8V~13.2V).Abweichende Wertekönnen
zuBeschädigungen amGerät führen.
2.Verbinden Sie den Video-Ausgang (BNC-Anschluß)mit demVideo-Eingang des
Monitors. BevorSie die Spannungsversorgung einschalten, überprüfen Sie bitteden
korrekten AnschlußdesVideo-Ausgangs. Falsche Anschlußbelegungen können zu
Beschädigungen an den Geräten führen.
CAUTION