Avtech IR CAMERA User manual

531Z
158_V0.9
IR CAMERA USER MANUAL
960H Ultra Resolution Series
The product image may differ from the actual product.
It’s recommended to use this camera with a DVR which supports 960H video recording.
Please read the instructions thoroughly before using the product.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ROHS Announcement
All lead-free products offered by the company comply with the requirements of the European law on the Restriction of
Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly
“lead-free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected
separately at the product end-of-life. This applies to your product and any peripherals marked with this symbol. Do not
dispose of these products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio interference.
The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to revise or
remove any content in this manual at any time.
C
CA AU UT TI IO ON N: :
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
Only operate this apparatus from the type of power source indicated on the label.
The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the possibility of such
damages.
C
CA AU UT TI IO ON N
R
RI IS SK K O OF F E EL LE EC CT TR RI IC C S SH HO OC CK K
alarm shop

OVERVIEW
This 960H IR camera series could produce high resolution images with 700 TVL to give you full
960H recording and live monitoring when it’s used with a DVR which supports 960H display.
This series also contains day and night feature, built-in 21 IR LEDs and IP67 standard approved
waterproof outdoor housing. Besides, it is very easy to install.
FEATURES
1. 1/3" H.R. Color CCD image sensor
2. 700 TVL superior image quality
3. Low light sensitivity of 0.1 Lux, 0Lux (IR ON)
4. IP67, suitable for outdoor use
5. Day and night features for 24-hour surveillance
PACKAGE CONTENT
IR camera * 1
Bracket * 1
User Manual * 1
SPECIFICATIONS*
Pick-up Element 1/3" H.R. Color CCD image sensor
Number of Pixels 976(H) x 494(V) <NTSC> / 976(H) x 582(V) <PAL>
Resolution 700 TVL
Min. Illumination 0.1 Lux / F2.0, 0Lux (IR ON)
IR LED 21 units
IR Effective Range Up to 15 meters
S/N Ratio More than 48dB (AGC OFF)
Electronic Shutter 1/60 (1/50) to 1/100,000 sec.
Lens f3.6mm / F2.0
Lens Angle (Horizontal) 76.3° / (Vertical) 56.2°/ (Diagonal) 98.3°
IRIS Mode AES
White Balance ATW
AGC Auto
IP Rating IP67
Video Output 1.0 Vp-p composite, 75Ω
Startup Temperature 0℃~40℃
Operating Temperature -20℃~40℃
Power Source (±10%) DC12V
Current Consumption (±10%) 70mA (IR OFF), 270mA (IR ON)
Dimensions (mm)** 60(Φ) x 90.13(L)
* The specifications are subject to change without notice.
** Dimensional Tolerance: ± 5mm
alarm shop

INSTALLATION
1. Use the supplied three screws to attach the bracket to wall. Drill a hole in advance on the proper position of the
wall for the Power and Video Cable to pass through later.
2. Remove the Joint Lock from the bracket by turning it counterclockwise. Then, screw the Joint Lock to the
backside of the camera (turn clockwise).
NOTE: There are two screw holes on the backside of the camera. Please choose the proper one which
best suits your installation environment.
3. Screw the camera with the Joint Lock connected to the bracket. After that, secure the Joint Lock to fix. Then,
pass the Power and Video Cable through the hole drilled in Step 1 to hide it.
Figure 1 Figure 2 Figure 3
CONNECTION
1. DC12V Input Terminal
Connect the power terminal of the camera to a DC 12V regulated power supply.
NOTE: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power
tolerance of this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output to the video input of a DVR with 75Ωcoaxial cable.
NOTE: To ensure the camera has sufficient protection against moisture, an extra waterproof measure,
such as by using an insulating tape, must be used to cover the power and video connectors after
connection.
alarm shop