Avtech AVN2503 Operation instructions

AVN2503
Wireless Network Camera
Tutorial
Prerequisites
Before using the camera, make sure the following items are ready:
Network camera (no microSD card)
DC12V adapter
Router
Mobile phone / tablet
(Optional) PC / laptop
(Optional) Recorder
And also check and write down the mac address of your camera:

System Diagram
There are four system diagrams suitable for four scenarios for you to build your own
surveillance system with this camera:
Diagram 1
I’m installing this camera to simply see my pet or properties at home when I’m away and I
do not need to keep video footage for later checking.
(This camera itself is only able to save up to 40 seconds of event footage.)
Diagram 2
I need video recording and I have a redundant PC / laptop which can operate continuously
Diagram 3
I need long time video recording and it’s easy to do re-cabling at my home
Diagram 4
I need long time video recording and it’s not easy to do re-cabling at my home; the wireless
support is preferable.
Diagram 1 (Wireless) camera + router + mobile phone / tablet
Recommended installation steps: software setup hardware installation

Diagram 2 (Wireless) camera + router + PC + mobile phone / tablet
Recommended installation steps: hardware installation & setup software setup
Diagram 3 (Wired) camera + router + NVR + mobile phone / tablet
Recommended installation steps: hardware installation & setup software installation

Diagram 4 (Wireless) camera + router + NVR + mobile phone / tablet
Recommended installation steps: software setup hardware installation & setup
Software Setup
Go to Google Play or App Store to search and download the app, EagleEyes, and follow the
instructions below based on the system diagram you’re using.
Diagram 1 (Wireless) camera + router + mobile phone / tablet
Step1: Power on your camera and wait for the LED status indicator to start flashing.

Step2: Install EagleEyes on your mobile phone / tablet.
Step3: Instead of using your mobile network (such as 4G / 5G network), please connect
your mobile phone / tablet to your wireless network first.
Then, open EagleEyes and click + (Add) to add a device. ( Figure 1 )
Step4: Select EaZy ( Figure 2 ).
Step5: Select Wireless IP Camera ( Figure 3 ).
Figure 1
Figure 2
Figure 3
Video demo for Step3 ~ Step5

Step6: Show the QR code to the camera within the distance of 20~30 cm for scanning.
Check Figure 4 or the video demo below to know more details.
Figure 4
If you can’t add your camera by scanning the QR code successfully, please add the
device manually (Manual Setup).
Video Demo:

Diagram 2 (Wireless) camera + router + PC (CMS Lite) + mobile phone / tablet
Step1: Power on your camera and wait for the LED status indicator to start flashing.
Step2: Install EagleEyes on your mobile phone / tablet.
Step3: Instead of using your mobile network (such as 4G / 5G network), please connect
your mobile phone / tablet to your wireless network first.
Then, open EagleEyes and click + (Add) to add a device. ( Figure 1 )
Step4: Select EaZy ( Figure 2 ).
Step5: Select Wireless IP Camera ( Figure 3 ).
Figure 1
Figure 2
Figure 3

Video demo for Step3 ~ Step5
Step6: Show the QR code to the camera within the distance of 20~30 cm for scanning.
Check Figure 4 or the video demo below to know more details.
Figure 4

If you can’t add your camera by scanning the QR code successfully, please add the
device manually (Manual Setup).
Video Demo:
Step7: Click here to download and install CMS Lite to your PC.
Step8: Open CMS Lite, and scan and search the IP address of this camera.
Video demo:

Diagram 3 (Wired) camera + router + NVR + mobile phone / tablet
Step1: Power on the camera.
Step2: Check & write down the mac address of your camera.
Step3: Search and add the camera to the NVR (takeAVTECH NVR as an example).
Video demo:
Step4: When the camera is added successfully, you’ll be able to see the camera images.
Diagram 4 (Wireless) camera + router + NVR + mobile phone / tablet
Step1: Power on your camera and wait for the LED status indicator to start flashing.
Step2: Install EagleEyes on your mobile phone / tablet.
Step3: Instead of using your mobile network (such as 4G / 5G network), please connect
your mobile phone / tablet to your wireless network first.
Then, open EagleEyes and click + (Add) to add a device. ( Figure 1 )