
2
FUNCTIONS:
•ON/OFF
•H/T
•°F/°C
•MAX/MIN Memory recalling
FEATURE:
•133 mm Stainless steel sensor probe
•1 secon normal temperature sensing time
•Piercing probe
•Protective plastik sleev with clip for stainless steel
SPECIFICATION:
Measurement range: -50°C~150°C or -58°F~+302°F
Resolution: 0.1° for -19.9°~+199.9°, otherwise 1°
Accuracy: ±0.1°C in the range of -30°C~+150°C, otherwise more than
±2°C
±1.8°F in the range of -22°F~+302°F, otherwise more than
±4°F
Ambient temperature for plastic casing:-10°C~+50°C or +14°F~+122°F
Battery: 1x 1.5V “A76” size (LR44, G13) or equivalent
INSTALLATION:
•Unpack the thermometer with care.
•Open the battery oor, install the battery into the battery compartment than close the battery
oor.
•Sli ing plastic sleeve the thermometer is noe rea y for use.
•Replace new battery when the low battery in icator appears on the screen.
OPERATION
•Sli e/Press the “ON/OFF” switch/Button all functions will show on the isplay, the thermometer
is rea y for use.
•“°F/°C”---to select esire temperature unit.
•“H/T”---press once, “HOLD” flash to retain rea ing for recor ing.
•“MAX/MIN”---press once to recall minimum temperature teste . Press again for maximum
temperature teste . Testing mo e will restore after 3 secon s
TEMPERATURE ALARM SETTING:
•Press the “LOW Al” or “HI AL” button for setting alarm at esire low an high temperature.
Press the “LOW AL” button. The “LOW” sign appears. Press the “HI AL” button, the “HIGH” sign will
be shown. The isplay will show -50°C or -58°F an start to increase up to +150°C or /+299°C or
+572°F.