Axiom ED25P User manual

ED25P
passive near-eld point source loudspeaker
USER MANUAL
revision 2023-09-19

2
Watch for these symbols:
The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure, that may be of sucient magnitude to constute a risk of electric shock to
persons.
The exclamaon point within an equilateral triangle is intended to alert the user to the presence of important operang and
maintenance (servicing) instrucons in the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instrucons.
2. Keep these instrucons.
3. Heed all warnings.
4. Follow all instrucons.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any venlaon openings. Install in accordance with the manufacturer’s instrucons.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, parcularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use aachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart
is used, use cauon when moving the cart/apparatus combinaon to avoid injury from p-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of me.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such
as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Warning: to reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
16. Do not expose this equipment to dripping or splashing and ensure that no objects lled with liquids, such as vases, are placed
on the equipment.
17. To completely disconnect this apparatus from the ac mains, disconnect the power supply cord plug from the ac receptacle.
18. The mains plug of the power supply cord shall remain readily operable.
19. This apparatus contains potenally lethal voltages. To prevent electric shock or hazard, do not remove the chassis, input
module or ac input covers. No user serviceable parts inside. Refer servicing to qualied service personnel.
20. The loudspeakers covered by this manual are not intended for high moisture outdoor environments. Moisture can damage
the speaker cone and surround and cause corrosion of electrical contacts and metal parts. Avoid exposing the speakers to
direct moisture.
21. Keep loudspeakers out of extended or intense direct sunlight. The driver suspension will prematurely dry out and nished
surfaces may be degraded by long-term exposure to intense ultra-violet (UV) light.
22. The loudspeakers can generate considerable energy. When placed on a slippery surface such as polished wood or linoleum,
the speaker may move due to its acouscal energy output.
23. Precauons should be taken to assure that the speaker does not fall o a stage or table on which it is placed.
24. The loudspeakers are easily capable of generang sound pressure levels (SPL) sucient to cause permanent hearing damage
to performers, producon crew and audience members. Cauon should be taken to avoid prolonged exposure to SPL in excess
of 90 dB.
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end
of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their local government oce, for details of where and
how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms
and condions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

3
LIMITED WARRANTY
Proel warrants all materials, workmanship and proper operaon of this product for a period of two years from the original date of purchase. If any
defects are found in the materials or workmanship or if the product fails to funcon properly during the applicable warranty period, the owner
should inform about these defects the dealer or the distributor, providing receipt or invoice of date of purchase and defect detailed descripon.
This warranty does not extend to damage resulng from improper installaon, misuse, neglect or abuse. Proel S.p.A. will verify damage on returned
units, and when the unit has been properly used and warranty is sll valid, then the unit will be replaced or repaired. Proel S.p.A. is not responsible
for any “direct damage” or “indirect damage” caused by product defecveness.
• This unit package has been submied to ISTA 1A integrity tests. We suggest you control the unit condions immediately aer unpacking it.
• If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspecon.
• Proel is not responsible for any damage that occurs during shipment.
• Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer.
• Possible damages to unit should be immediately noed to forwarder. Each complaint for package tampered with should be done within eight
days from product receipt.
CONDITIONS OF USE
Proel do not accept any liability for damage caused to third pares due to improper installaon, use of non-original spare parts, lack of
maintenance, tampering or improper use of this product, including disregard of acceptable and applicable safety standards. Proel strongly
recommends that this loudspeaker cabinet be suspended taking into consideraon all current Naonal, Federal, State and Local regulaons. The
product must be installed be qualied personal. Please contact the manufacturer for further informaon.
DECLARATION OF CONFORMITY
The product is in compliance with:
RoHS Direcve 2011/65/EU and 2015/863/EU, WEEE Direcve 2012/19/EU.
The product is in compliance with:
S.I. 2012/3032 The Restricon of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulaons 2012

4
INTRODUCTION
The ED25P is an ultra-compact and lightweight, two-way passive point source loudspeaker designed for near-field sound
reinforcement applicaons such as television, stage front, conferencing, theatres, and audio-visual. Due to its very low prole, the
ED25P is an ideal stage lip monitor and is especially useful for fashion show catwalks where it can provide unobtrusive inwards/
outwards coverage for both audience and presenters.
The two 5.25” low frequency drivers are matched to a dome tweeter on a spherical waveguide horn with an audiophile-grade passive
crossover in a WTW linear enclosure conguraon to give a wide dispersion paern that allows widely spaced units to cover large
spaces with high quality background sound.
The cabinet is trapezoidally shaped, and also asymmetrical, and this prole not only allows the assembly of small clusters using the
integral ypoints, but also enables it to be suspended horizontally very close to a ceiling or placed on a stage front as a low prole
monitor.
The 15mm birch plywood cabinet is provided with M8 rigging points on the top and boom, and M10 and M5 rigging points on
the rear of the cabinet to allow suspension in xed installaons using oponal mounng brackets. Two Neutrik® speakON™ NL4
connectors provide input and link connecons.
To extend the system’s low frequency response the ED25P can be complemented by subwoofers from the Axiom SW series such as
the SW210P or SW18P.
TECHNICAL SPECIFICATION
SYSTEM POWER HANDLING
System’s Acousc Principle Two-way Vented Enclosure
Asymmetric Dispersion
Power Handling (AES)* 100 W
Power Handling (program) 200 W
Frequency response 125 Hz – 20 kHz (-6dB) ENCLOSURE & CONSTRUCTION
Nominal Impedance 16 Ω Width 460 mm (18.1”)
Horizontal Coverage Angle 80° averaged, 1kHz to 20kHz (-6 dB) Height 176 mm (6.9”)
Vercal Coverage Angle 65° averaged, 1kHz to 20kHz (-6 dB) Depth 190 mm (7.5”)
Sensivity (4V @ 1m, 2 Pi) 93 dBSPL Taper angle Monitor: 20°
Maximum Peak SPL @ 1m 116 dB Enclosure Material 15 mm birch plywood
TRANSDUCERS Paint High resistance, black or white water
based paint
Low frequency transducer Two 5.25” (133mm) 1.5” VC LF drivers
High frequency transducer One Dome tweeter with spherical
waveguide horn (SWGH) Flying System 2 x M8 ying points on sides
2 x M5 ying points on rear
INPUT CONNECTIONS Net Weight 7kg (15.4 lbs)
Connector Type Neutrik® Speakon® NL4 x 2
Input Wiring Pin 1+/1- (Pin 2+/2- pass thru)
* AES Pink Noise Connuous Power
INDEX
INTRODUCTION ...........................4
TECHNICAL SPECIFICATION ..................4
MECHANICAL DRAWING ....................5
OPTIONAL ACCESSORIES ....................5
SPARE PARTS ..............................5
INPUT ...................................6
LINK .....................................6
KPTLTP WALL MOUNTING ...................6
KPTED25B WALL or TRUSS MOUNTING .........7

5
MECHANICAL DRAWING
OPTIONAL ACCESSORIES
KPTED25B Wall or Truss Mounng “C” bracket.
KPTLTP Wall Mounng bracket.
NL4FX Neutrik Speakon® PLUG
see hp://www.axiomproaudio.com for detailed descripon and other available accessories.
SPARE PARTS
NL4MP Neutrik Speakon® panel socket 98ALT200001 5.25’’ woofer - 1.5” VC - 8 ohm
91CRO039AR1 ED23P/ED25P Crossover PCBA 98DRI025C 1’’ HF driver - 1” VC - 8 ohm with Wave Guide
460mm
[18.1"]
M8 Flying Point M8 Flying Point
2x M5 Flying Points
176mm
[6.9"]
20°
190mm
[7.5"]

6
INPUT
Power input for the external amplier. The ED25P
includes a passive crossover for filtering the
signal. It includes also an internal protection
that limits any excessive power to the HF secon
and, if the signal persists for a long time, it
excludes the HF secon. The connecons are the
following:
INPUT - LINK
NL4 pin number internal connecon
1+ +
1- -
2+ none (pass thru)
2- none (pass thru)
LINK
Power output in parallel with the INPUT socket, for connecng the unit to another speaker. The number of ED25P cabinets that can
be connected in parallel depends on the amplier load capacity.
Note: there is no silk-screen prinng on the speaker, the illustraon above is only representave of the internal connecon, both
speakon connectors on the sides of the speaker can be used as INPUT or LINK.
KPTLTP WALL MOUNTING
This wall mounng bracket allows to aim the loudspeaker in both horizontally and vercally. The horizontal aiming is free with +/-
15° and the vercal aiming is in 4 steps (0°,-15°,-30°,-45°).
Note: the speaker plate can be rotated as shown above for the opmal speaker orientaon, the speaker plate will be xed to the
rear M5 ying points.
1
1
CONCRETE OR BRICK WALL
1
1
WALL PLATE
2
2
SPEAKER
PLATE
SPEAKER
PLATE
CONCRETE OR BRICK WALL
WALL PLATE

7
KPTED25B WALL or TRUSS MOUNTING
Using the “C” shape bracket the ED25P loudspeaker can be installed to walls or mounted to trusses in combinaon combining with
a M12 ALISCAF (not supplied).
It allows to aim the speaker in one direcon, vercal or horizontal.
WARNING! CAREFULLY READ THE FOLLOWING INSTRUCTIONS AND CONDITION OF USE:
• For a supplementary safety assure always the loudspeaker to the wall with an alternave rope.
• This loudspeaker is designed exclusively for Professional audio applicaons. The product must be installed by qualied
personal only.
• Proel strongly recommends that this loudspeaker cabinet be suspended taking into consideraon all current Naonal,
Federal, State and Local regulaons. Please contact the manufacturer for further informaon.
• Proel do not accept any liability for damage caused to third pares due to improper installaon, lack of maintenance,
tampering or improper use of this product, including disregard of acceptable and applicable safety standards.
• During assembly pay aenon to the possible risk of crushing. Wear suitable protecve clothing. Observe all
instrucons given on the rigging components and the loudspeaker cabinets. When chain hoists are in operaon ensure
that there is nobody directly underneath or in the vicinity of the load. Do not under any circumstances climb on the array.

PROEL S.p.A. (World Headquarters) - Via alla Ruenia 37/43 - 64027 Sant’Omero (Te) - ITALY
Tel: [phone] Fax: [phone] www.axiomproaudio.com