AXIOMTEK rBOX120-FL User manual

4 9416M120010E
©Copyright 2013 Axiomtek Co., Ltd.
Version A1 May 2013
Printed in Taiwan
Installing the Hard Disk Drive
Step 1 Turn off the system.
Step 2 Loosen these screws, and remove the cover from the
system.
Step 3 Loosen these screws and remove the Hard Disk Drive
fixing bracket.
Step 4 Insert the Hard Disk Drive into the socket until it is firmly
seated. Put the Hard Disk Drive fixing bracket back to the
system, and fasten screws tight close the Hard Disk Drive
fixing bracket.
Step 5 Put the cover back to the system, and fasten screws tight
close the chassis.
rBOX120-FL Quick Installation Guide
9416M120010E 1
©Copyright 2013 Axiomtek Co., Ltd.
Version A1 May 2013
Printed in Taiwan
Checklist
rBOX120-FL System Unit x 1 Power terminal block
rBOX120-FL Quick
Installation Guide x 1 CD x 1 (for Driver and User’s Manual)
Screws Din-rail Kit x1
Note: Please contact your local vendors if any damaged or missing items.
Dimensions
rBOX120-FL Robust Din-rail Fanless Embedded System

2 9416M120010E
©Copyright 2013 Axiomtek Co., Ltd.
Version A1 May 2013
Printed in Taiwan
I/O Outlets
The following figures show you I/O outlets on front view and top view of the
rBOX120-FL.
Front View
Top View
9416M120010E 3
©Copyright 2013 Axiomtek Co., Ltd.
Version A1 May 2013
Printed in Taiwan
Installing the Memory Module
Step 1 Turn off the system.
Step 2 Loosen these screws, and remove the top cover from the
system.
Step 3 Hold one side of the module, and insert the gold colored
contact into the socket. Push the module down. The
memory module is locked by two latches on the sides.
Step 4 Close the cover to the chassis, and fasten all screws.