Axis Axis 216MFD User manual

DATASHEET
The vandal-resistant AXIS 216MFD-V, and AXIS 216MFD
with its tamper-resistant casing, are fixed domes specifi-
cally adapted for discreet video surveillance in exposed
indoor environments.
Thanks to the 1.3 megapixel progressive scan sensor
and advanced image processing, AXIS 216MFD Network
Cameras deliver crisp and clear images, perfect for the
identification of objects and persons.
AXIS 216MFD Network Cameras offer high-performance, fixed dome solutions for exposed indoor
locations. Compact, discreet and with megapixel resolution, they are ideal for indoor video
surveillance of areas such as retail stores, schools, airports, banks and government buildings.
AXIS 216MFD/216MFD-V Network Cameras
Discreet video surveillance with exceptional image detail.
> Discreet and
compact design
> Megapixel resolution
> Simultaneous MPEG-4
and Motion JPEG
> Power over Ethernet
> Two-way audio
Simultaneous MPEG-4 and Motion JPEG video streams
in full megapixel resolution allow for optimization of
image quality and bandwidth efficiency.
Power over Ethernet (IEEE 802.3af) supplies power to
the cameras via the network, which eliminates the need
for power cables and reduces installation costs.
Two-way audio support allows remote users to listen in
on an area and communicate with visitors or intruders.

Technical specifications – AXIS 216MFD/216MFD-V Network Cameras
www.axis.com
©2008 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB
in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right
to introduce modifications without notice.
32273/EN/R1/0808
Camera
Models AXIS 216MFD: Tamper-resistant casing
AXIS 216MFD-V: Vandal-resistant casing
Image sensor 1/3” Progressive scan RGB CMOS 1.3 Megapixel
Lens Varifocal 2.8 –10 mm, F1.3, DC-iris
Angle of view: 27°–100° horizontal
Minimum
illumination
2 lux, F1.3
Shutter time 1/15000 s to 1/4 s
Camera angle
adjustment
Pan 360°, tilt 170°, rotation 340°
Video
Video
compression
MPEG-4 Part 2 (ISO/IEC 14496-2)
Motion JPEG
Resolutions 16 0 x 9 0 –12 8 0 x 1 0 24
Frame rate
MPEG-4
Up to 8 fps at 1280x1024, 13 fps at 1024x768,
20 fps at 800x 600
Frame rate
Motion JPEG
Up to 12 fps at 1280 x1024, 20 fps at 1024x768,
30 fps at 800x 600
Video streaming Simultaneous Motion JPEG and MPEG-4
Controllable frame rate and bandwidth
VBR/CBR MPEG-4
Image settings Compression, color, brightness, sharpness, white balance,
exposure control, rotation, fine tuning of behavior at low light
Text and image overlay
Privacy mask
Audio
Audio streaming Two-way, half duplex
Audio
compression
AAC LC 8 kHz
G.711 PCM 8 kHz
G.726 ADPCM 8 kHz
Configurable bit rate
Audio input/
output
Built-in microphone, external microphone input or line input,
line level output
Network
Security Password protection, IP address filtering, HTTPS encryption,
IEEE 802.1X network access control, user access log
Supported
protocols
IPv4/v6, HTTP, HTTPS, QoS layer 3 DiffServ, FTP, SMTP, Bonjour,
UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP,
TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
System integration
Application
Programming
Interface
Open API for software integration, including VAPIX®
from Axis Communications available at www.axis.com
Intelligent video Video motion detection, active tampering alarm,
audio detection
Alarm triggers Intelligent video and external input
Alarm events File upload via FTP, HTTP and email
Notification via email, HTTP and TCP
External output activation
Video buffer 20 MB pre- and post alarm
General
Casing AXIS 216MFD: Tamper-resistant casing
AXIS 216MFD-V: 1000 kg (2200 lb.) impact-resistant casing
Processors and
memory
ARTPEC-A, 64 MB RAM, 8 MB Flash
Power 4.9 –5.1 V DC max 3.8 W
Power over Ethernet IEEE 802.3af Class 1
Connectors RJ-45 10BASE-T/100BASE-TX PoE, DC jack
Terminal block for 1 alarm input and 1 output,
3.5 mm mic/line in, 3.5 mm line out
Operating
conditions
0– 50 ºC (32–122 ºF)
Humidity 20- 80% RH (non-condensing)
Storage
conditions
-20–70 ºC (-4 –158 ºF)
Approvals EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024,
FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B,
C-tick AS/NZS CISPR 22, EN 60950-1
Power supply: EN 60950-1, UL, CSA
Weight AXIS 216MFD: 425 g (0.94 lb.)
AXIS 216MFD-V: 580 g (1.28 lb.)
Included
accessories
Power supply, mounting and connector kits, Installation Guide,
CD with installation tools, recording software and User’s
Manual, Windows decoder 1-user license
Dimensions
Versatile adjustment of
camera angle at installation
Image
balance
ring
Tilt adjustment
screw
Locking screw
for pan adjustment
94 mm (3.7")
144 mm (5.7") 89 mm (3.5")
127 mm (5")
132 mm (5.2")
Optional accessories
Versatile adjustment of
camera angle at installation
Image
balance
ring
Tilt adjustment
screw
Locking screw
for pan adjustment
94 mm (3.7")
144 mm (5.7") 89 mm (3.5")
127 mm (5")
132 mm (5.2")
Versatile adjustment of
camera angle at installation
Image
balance
ring
Tilt adjustment
screw
Locking screw
for pan adjustment
94 mm (3.7")
144 mm (5.7") 89 mm (3.5")
127 mm (5")
132 mm (5.2")
Various mounting kits
Drop-ceiling mount kit,
transparent or smoked cover
Optional casings with smoked
cover or black casing
More information is available at www.axis.com
For information on AXIS Camera Station and
video management software from
Axis’ Application Development Partners,
see www.axis.com/products/video/software/