Aztech AIR-706P User manual

© Copyright 2017 All rights reserved.
No part of this document may be reproduced, republished, or retransmitted in any
form or by any means whatsoever, whether electronically or mechanically,
including, but not limited to, by way of photocopying, recording, information
recording, or through retrieval systems without the express written permission. We
reserve the right to revise this document at any time without the obligation to notify
any person and/or entity. All other company or product names mentioned are used
for identification purposes only and may be trademarks of their respective owners.
LIMITATION OF LIABILITY AND DAMAGES
THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE
MANUFACTURER AND MANUFACTURER’S RESELLERS (COLLECTIVELY REFERRED TO AS
―THE SELLERS‖) DISCLAIM ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES
ARISING FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF
TRADE. IN NO EVENT WILL THE SELLERS BE LIABLE FOR DAMAGES OR LOSS, INCLUDING
BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL WILLFUL, PUNITIVE, INCIDENTAL,
EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF
BUSINESS PROFITS, OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY
THIRD PARTY ARISING OUT OF THE USE OR THE INABILITY TO USE THE PRODUCT OR THE
SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE RESULTING FROM DEFECTS IN THE
PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF DATA
OF ANY KIND, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY,
EVEN IF THE PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE
ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE PRODUCT OR ITS
SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF LIABLITY FOR DAMAGES, THE ABOVE LIMITATION MAY
NOT APPLY TO THE PARTIES. IN NO EVENT WILL THE SELLERS’ TOTAL CUMULATIVE
LIABILITY OF EACH AND EVERY KIND IN RELATION TO THE PRODUCT OR ITS SOFTWARE
EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT.

Contents
About the Router ............................................................................................................................... 3
Package Contents ........................................................................................................................ 5
Device Design.................................................................................................................................6
Getting Started................................................................................................................................... 9
Plan your Network........................................................................................................................10
Remove/ Disable Conflicts........................................................................................................ 11
Internet Sharing, Proxy, and Security Applications ............................................................11
Configuring TCP/IP Settings....................................................................................................... 11
Configuring Internet Properties................................................................................................12
Removing Temporary Internet Files.........................................................................................12
Setup the Device ......................................................................................................................... 13
The Web User Interface.................................................................................................................. 14
Accessing the Web User Interface .........................................................................................14
Web User Interface......................................................................................................................15
Status Icons and Reboot button .............................................................................................15
Quick Setup Wizard.....................................................................................................................16
Basic ................................................................................................................................................23
Advanced .....................................................................................................................................46
AON Mesh..........................................................................................................................................89
AON Mesh Web User Interface................................................................................................ 89
Mesh System Setup......................................................................................................................91

About the Router
Living in an era where wireless technology is of key importance and with the
introduction of fibre network, people are bombarded with different router
alternatives that aim to give the best. One has to find a router that accommodates
not only to the consistent growth in wireless devices one has at home but also to
meet the fast and reliable performance of a fibre optic cable connection. One of
the major challenges a router should be able to support is not only to distribute the
internet connection to a variety of devices but also to provide a seamless
connectivity with an exceptional Wi-Fi speed to match as well as excellent
coverage that will allow one to roam around their premises without getting
disconnected. And not forgetting to provide a gateway to the fibre network. With
careful consideration to these ever growing needs, Aztech developed the AIR-706P,
a Dual Band Wireless-AC 1900Mbps Gigabit Router, a device that equips your home
further with wireless flexibility, offers extreme wireless transfers rates and an ultimate
wireless performance and designed to cater for Fibre-to-the-Home(FTTH)
technology.
Your Internet Connection’s Capable Partner
Innovated and specifically customized for fast internet connections, the AIR-
706P is designed with a Gigabit WAN port flexibly built for Fibre-to-the-Home
(FTTH) via ONT or Cable Modem connections.
Exceptional Wireless Performance
Equipping your home further with wireless flexibility, the Aztech AIR-706P has a
concurrent dual band wireless feature which enables its users to use (1) the
2.4GHz frequency band that provides wireless speeds of up to 600Mbps
(Turbo QAM), and / or (2) the faster 5.0GHz frequency band which offers
astounding wireless speeds of up to 1300Mbps - simultaneously. It also
supports IEEE 802.11a/b/g/n/ac Wireless standard (Up to 1900Mbps).
Four Gigabit Ports for Faster File Sharing
Transfer and share files between the computers on your network that have
gigabit ports in an even faster speed.
Easy Installation and Setup
Involving zero complexity in its setup, the Aztech AIR-706P implements an
intuitive design making the device easy to setup, explore, and even use.
Easily manage various router features through an OS Independent Web User
Interface that users can easily access after setting up the device.

Built-In Torrent Client
This feature allows users to call for a torrent file and store the downloaded
content to an externally attached USB storage device.
USB 3.0 Ports for Enhanced User Experience
Equipped with two (2) USB 3.0 ports, customers may now enjoy a faster
method of sharing a connected storage’s files throughout the network.
Connect Easily using Wi-Fi Protected Setup (WPS)
Instead of connecting conventionally to your wireless network, the AIR-706P’s
WPS support enables users to easily connect their wireless devices to the
gateway with a simple press of the WPS button
Unique Value Added Features:
AON Mesh for Seamless Roaming
This feature allows AIR-706P to provide ultra-fast wireless speed with seamless
roaming and using only one password and a single Wi-Fi network name. It
delivers improved coverage and to provide a spectral blanket spread
eliminating the usual ―hard-to-get‖ areas such as blind spots.
Beamforming Technology
Allows the Aztech AIR-706P track devices and focus its wireless signals directly
to the devices that need it, disregarding wireless interferences (e.g. thick
walls, other wireless devices etc.) and dramatically improving wireless speed
and wireless performance
Aztech Smart Network App
This App allows user to configure the router. It is auto-adaptive and it features
Wi-Fi Connect Alert, Wi-Fi Radar, and Parental Control. It supports both
Android and IOS and is downloadable through Google Play Store and Apple
App Store.
Wi-Fi Connect Feature
Aztech Smart Network app’s Wi-Fi Connect feature allows you to have a
more secure network by enabling user to know if there is someone connected
to your home network. You can easily monitor which devices connect to your
router.
Wi-Fi Radar Feature
Aztech Wi-Fi Radar feature available on the Aztech Smart Network app
enables user to know the physical location of wireless networks. It allows you
to scan for available networks and to create your preferred networks for
better user experience.

Package Contents
Package contents are listed below. For any missing items, please contact your
dealer immediately. Product contents vary for different models.
AIR-706P
Ethernet cable (Yellow)
12V 2.5A DC Power Adapter
Easy Start Guide
Warranty Policy
NOTE: You may also download the Quick Installation Guide and the User Manual by
visiting this link: http://www.aztech.com

Device Design
Front Panel
LED
Status
Description
Power
Off
Green (Solid)
Red (Solid)
No power is supplied to the
device
Connected to a Power Supply
Error on the device
ETH LAN 1-4
Off
Green (Solid)
Green (Blinking)
No Ethernet connection
Connected to an Ethernet
device
Corresponding port is currently
transmitting / receiving data
5.0GHz/2.4GHz
Off
Green (Solid)
Green (Blinking)
There is no device connected
wirelessly
There is a device connected
wirelessly
Wireless interface is active
transmitting / receiving data.
USB
Off
On
There is no USB device
connected to the
corresponding USB port.
A USB device connected to
the
corresponding USB port.

AON
Green
Red (Solid)
Red (Blinking)
Mesh link is up and steady.
Mesh link between the router
and the node is weak.
Mesh link is down and not
available.
Broadband
Off
Green (Solid)
Green (Blinking)
There is no connectivity to the
ONT.
Connectivity to the ONT is
established.
WAN Ethernet interface is
connected.
Establishing ONT Signal.
Internet
Off
Green (Solid)
Red(Solid)
No internet
Internet interface is up
Authentication Failed
WPS
Green (Fast Blinking)
Green (Slow Blinking)
Indicates Mesh Pairing
process.
Indicates WPS pairing
between router and device

Back Panel
Physical Interface
Description
USB 1 and 2
USB 3.0 Ports for USB devices such as printers and
USB external hard drives
Ethernet 1 to 4
Connecting computers and other Ethernet
devices
Ethernet WAN
For WAN connection through an Ethernet cable
Reset
To reset the modem to the factory default
configuration
Power Input
12V 2.5A Adapter input
On/Off switch
Switch to on and off the router

Getting Started
Setting up the device is easy. The diagram below provides an outline of the steps
needed in order to complete the installation. Brief descriptions appear beside each
step. Detailed instructions are provided in the subsequent pages.
You may see the suggested network setup.
You may need to remove or disable some
settings in your computer before proceeding
with the installation.
Connect the telephone cables, Ethernet cables
and power adapters.
Complete the Quick Setup Wizard to setup your
internet connection.
You may configure various router features
through the Web Interface or the Smart Network
App.

Plan your Network
Before moving ahead to setup your network, it is a good idea to draw out a network
diagram to help identify your network devices and plan out how to connect these
devices.
Each port in the router can be used for different connections. For example:
Ethernet 1 –Set-top Box
Ethernet 2 –Game Console
Ethernet 3 –Desktop Computer
Ethernet 4 –Dad’s Computer
Ethernet WAN –ONT
To create a network diagram:
For wireless devices, identify the wireless devices you want to include in the
network
For wired devices, identify which router port you want to use for each device.

Remove/ Disable Conflicts
To ensure that the router installation moves on smoothly, you need to remove or
disable conflicts that may interfere with the installation. Probable conflicts may
include:
Internet sharing applications
Proxy software
Security software
TCP/IP settings
Internet properties
Temporary Internet files
Internet Sharing, Proxy, and Security Applications
Internet sharing, proxy software, and firewall applications may interfere with the
router installation. These should be removed or disabled before starting the
installation. If you have any of the following or similar applications installed on your
computer, remove or disable them according to the manufacturer’s instructions.
If you have any of the following or similar applications installed on your computer,
remove or disable them according to the manufacturer’s instructions.
Internet Sharing
Applications
Proxy Software
Security Software
Microsoft Internet Sharing
Win Gate
Symantec
WinProxy
Zone Alarm
Configuring TCP/IP Settings
Check if your computer uses the default TCP/IP settings. Follow the steps below to
check the TCP/IP properties:
1. Select Start > Run. The Run dialog box would appear.
2. Enter control ncpa.cpl on the input box, and then click the OK button. This
would open the Network Connections window in your computer.
3. Right-click LAN and then select Properties. The Local Area Connection
Properties dialog box would appear.
4. Select Internet Protocol (TCP/IP) and then click Properties. The Internet
Protocol (TCP/IP) dialog box would appear.

5. Select Obtain an IP address automatically.
6. Click the OK button to close the Internet Protocol (TCP/IP) dialog box.
7. Click the OK button to close the Local Area Connection Properties dialog
box.
Configuring Internet Properties
Follow the steps below to set the Internet Properties:
1. Select Start > Run. This opens the Run dialog box.
2. Enter control inetcpl.cpl and then click OK to open the Internet Properties
window.
3. Click on the Connections tab.
4. On the Dial-up and Virtual Private Network settings pane, select Never
dial a connection.
5. Click OK to close Internet Properties.
Removing Temporary Internet Files
Temporary Internet files are files from Web sites that are stored in your computer.
Delete these files to clean the cache and remove footprints left by the Web pages
you visited. Follow the steps below to remove temporary Internet files:
1. Select Start > Run to open the Run dialog box.
2. Enter control and then click the OK button to open the Control Panel.
3. Double-click Internet Options.
4. On the Internet Options window, in the Temporary Internet Files pane, click
Delete Cookies.
5. Click Delete Files.
6. Click OK to close Internet Properties.

Setup the Device
When installing the router, find an area near the ONT and near an electrical outlet
for the router.
a. Power ON your AIR-706P by connecting and plugging its power adapter to a
power outlet.
b. Connect your ONT*/Cable Modem to the AIR-706P’s Broadband port using
an Ethernet cable.
c. Connect PC/Laptop to the router through local Ethernet or wireless.
NOTE: The POWER, BROADBAND, 2.4GHz and 5.0Ghz LEDs should now be
GREEN. If an Ethernet device is connected, its corresponding Ethernet LED
would be in GREEN. The Ethernet LED will also be blinking if there is activity on
the corresponding port.

The Web User Interface
The Web User interface allows you to configure your router’s features.
NOTE: If you are logging in the Web User Interface for the first time, you will be
directed to the Quick Setup Wizard
Accessing the Web User Interface
To access your AIR-706P’s Web User Interface:
1. Launch any web browser (e.g. Internet Explorer, Google Chrome).
2. Type-in 192.168.1.254 on the address bar and then press Enter. When you
first access the Web User Interface, you will automatically be redirected to
the Basic Mode of the AIR-706P User Interface.

3. If you have set a password after your first setup, you will be prompted to
key in the user name and password you set for your Web User Interface.
Web User Interface
The Web User Interface is subdivided into three (3) different categories:
Quick Setup Wizard
Basic
Advanced
Status Icons and Reboot button
The AIR-706P has a top panel which displays a representation of (1) the Wireless
status and (2) the Internet Status. A Reboot feature is also available in the top panel
for easier means of soft device reboot.
Wireless Status
Internet Status
A. Wireless Status
The Wireless Status displays the different statuses that are currently enabled,
including the Guest network.
B. Internet Status
The internet status shows the different internet status. There 2 different statuses;
Configured or Unconfigured.
Internet Status Colour
Description
No WAN detected - Unconfigured
WAN detected - Unconfigured
Configured

Quick Setup Wizard
The Quick Setup allows you to configure both the wireless properties of your router,
and the configuration of your fibre connection’s service provider. The Quick Setup
wizard has the following submenus:
Welcome
Change Password
Configure Internet
Modify Wireless
Summary
NOTE: It is highly recommended to go through the entire Quick Setup Wizard.
A.Welcome
This is the default page of the Quick Setup menu. It displays the main features and
product specifications of the AIR-706P.
Welcome page when WAN is not detected.
Welcome page when WAN is detected.

In the Welcome page, you may either click Manual Setup (when WAN is not
detected or if WAN cable is not plugged in) or Proceed when WAN cable is plugged
in.
B. Change Password
Allows you to give a new password to access your Web User Interface or the Smart
Network App. By default, there is no password set to access the Web User Interface.
To configure your Web User Interface password;
NOTE: Leave the Old Password field blank
1. Enter a new password in the New Password field
2. Retype the same password entered in the New Password field
3. Click Next
C.Configure Internet
Allows you to configure your internet to the Internet Service Provider (ISP) profile of
your network. For Singapore Fibre Residents, there are 4 profiles to choose from;
Others
M1
Singtel
Starhub
The profile shown by default is Others. You may select the Profile according to your
ISP. In Others, you may configure the WAN mode, Connection Type, VLAN,

Connection Method and DNS Setup to desired. For M1, Singtel and Starhub, their
configurations are pre-set and no changes can be made at this point.
To configure the Internet;
NOTE: Clicking Skip will not complete your setup
1. Choose an ISP profile
2. Click Next
Others Profile Internet Configurations
There is no pre-set configuration in Others. You may set your desired configuration
accordingly.
M1 Profile Internet Configurations
In M1 Profile, WAN mode is set to Ethernet, Connection type is IPoE,VLAN is
deactivated, Connection method is DHCP and DNS setup is Dynamic.

Singtel Profile Internet Configurations
When Singtel profile is selected, VLAN is Activated and Priority and VLAN ID is set to 0
and 10 respectively. WAN mode is Ethernet, Connection type is IPoE, Connection
method is DHCP and DNS setup is Dynamic.
Starhub Profile Internet Configurations
In Starhub Profile, WAN mode is set to Ethernet, Connection type is IPoE,VLAN is
deactivated, Connection method is DHCP and DNS setup is Dynamic.