AzureWave AW-BT261 User manual

AzureWave / AW-BT261
Bluetooth Module
User Manual

1
Install the Bluetooth Driver…………………………………………..2
Connect to other Bluetooth Enabled Devices……………………..7
Uninstall the Bluetooth Driver……………………………………….11

2
Install the Bluetooth Driver
Step1：Double click Bluetooth Software 6.x.x.x
Then, InstallShield Wizard will show up and Click”Next”.

3
Step2 ：You will see the installation Destination screen.
Step 3. The default destination location is already selected. Click
Change to browse to a different destination.

4
Step 4. Click Next. You will see Ready to Install the Program
screen.
Step 5：Click Install to begin installation.
You will see Installing Bluetooth XP Suite screen that displays the
current settings including user information, setup type, and destination
directory. This allows you to review and modify the setup information.

5

6
Step 6：Click Next.
Bluetooth Suite begins to configure and copy the new software. When the
installation is complete, you will see the Finish screen.

Step 7：Click Finish.
You will see a prompt reminding you that before you can use the
program, you must shut down and restart your computer.
Step 8：Click OK and shut down and restart your computer.
The installation is complete. This process creates a ‘Bluetooth Suite’
shortcut on your desktop.
Now you are ready to run Bluetooth Suite.

8
Launching the Bluetooth Suite
1. Insert the Bluetooth Suite USB device into the USB port of your
system.
NOTE: You can insert the Bluetooth Suite USB device in any USB port. When
you do, you will see Found New Hardware message.
2. Double click on the Bluetooth Suite icon on your desktop or
choose start > All Programs > Bluetooth Suite > Launch Bluetooth
Suite. It displays the blank Atheros Bluetooth Suite screen.
NOTE: Wen you launch Bluetooth Suite for the first time, Bluetooth Suite
screen may not display any devices within range. It is normal for new
installation. You need to click on the Discovery button the top left panel of the
window to see all the Bluetooth devices in range. See Figure
2-1.
Figure 2-1. Bluetooth Suite Startup Screen During Discovery

9
When the Bluetooth Suite finds devices in range, it displays them.
See Figure 2-2
Figure 2-2. Discovered Bluetooth Devices
NOTE: Trusted remote devices will show Paired status in Device list, and Connected
remote devices will show Connected status in Device list. Other devices will display
Inrange status.