B-hyve 21004 User manual

Box Contents
Hose Faucet Timer
Wi-Fi Hub
Quick Start Guide
1) Open the B-hyve App
Log into your B-hyve account and go to
devices under settings to add the Hose
Faucet Timer as a new device. The app will
walk you through the rest of the process.
For new users, search for “B-hyve” and
download the free Android or iOS app.
Create an account to begin timer setup.
3) Enter Pairing Mode
Press the B-hyve button to enter into
pairing mode. Your hub will flash a
blue light every 5 seconds.
4) Power Your Hose Faucet Timer
Insert two new AA Batteries*, the timer is now in
pairing mode and will flash a blue light every 5 seconds.
You will also hear two clicks about 6 seconds apart, this
is normal and ensures the valve is closed before you
turn on the water.
Write down the MAC address: 12 digit alphanumeric
code on the bottom of the timer.
Timer MAC Address:
——:——:——:——:——:——
If at any time you need to re-pair or do a
factory reset, press the on/off button
quickly 5 times.
*Batteries are sold separately. Replace batteries
when timer flashes a red light every 5 seconds,
or when the app notifies you that batteries
need replacing.
If you remove or change the batteries you
will need to reconnect to Bluetooth® to set the
correct time and date.
5) Install the Timer
Your timer is now ready to be
used with any product that can be
attached to a standard hose faucet.
Do not place the timer in an
underground valve box.
6) Turn on Your Water
The water must remain on for
the timer to work properly.
Write down the MAC address:
12-digit alphanumeric code on the back of the hub.
Plug the hub into an indoor outlet within range of
your B-hyve device and Wi-Fi signal.
Avoid areas where the signal
must travel through dirt or thick
steel barriers.

Manual Watering
Simply press and hold the on/off
button for 5 seconds to activate
manual watering.
Need to stop watering, even during a
programmed time? Press the on/off
button once to stop watering.
Timer
Range: 150 ft without interference
Pressure Operating Range: 10-100 PSI
Temperature Operating Range:
32°F-158°F (0-70°C)
For Outdoor Use With Cold Water Only
Not For Use With Appliances
Do Not Mix Alkaline, Standard (Carbon-Zinc), or
Rechargeable (Nickel Cadmium) Batteries.
Used up or dead batteries must be removed from the
timer and disposed of properly.
Do not dispose of batteries in fire.
Batteries may explode or leak.
Hub
Range: 150 ft without interference
Temperature Operating Range:
32°F-104°F (0-40°C)
Storage Temperature:
-4°F to 140°F (-20 °C to 60 °C)
Humidity Operating Range: 0–90%
Input: 100-240V ~ 50/60Hz 0.2A
Output: 5V-1.0A
For Indoor Use Only
FCC Statement: FCC ID: ML6HT25 & ML6-BH1
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Warning: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from the receiver’s.
• Consult the dealer or an experienced radio/TV technician for help.
This device meets the FCC and IC requirements for RF exposure in public or controlled environments.
The end user is advised to maintain a distance 20 cm from the timer and any personnel to ensure
compliance with RF exposure regulations.
IC Statement: IC: 3330A-HT25 & 3330A-BH1
This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. This Class B digital
apparatus complies with Canadian ICES-003.
Remarque: cet appareil été testé et déclaré conforme aux limites d’exposition pour les appareils
numériques de classe B, selon la section 15 de la Règlementation de la FCC. Ces limites sont conçus pour
fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle.
Cet appareil produit, utilise et peut émettre de l’énergie radio fréquence et, si elle n’est pas installée
et utilisée conformément aux instructions, peut causer des interférences nuisibles aux communications
radio. Cependant, il n’est pas garantie que des interférences ne se produisent pas dans une installation
particulière. Si cet appareil cause des interférences gênantes à la réception d’un signal radio ou de
télévision, ce qui peut être déterminé en allumant et en éteignant l’appareil, l’utilisateur peut corriger les
interférences en suivants une des mesures suivantes :
• Réorientez ou repositionnez l’antenne de réception.
• Augmentez la distance entre l’appareil et le récepteur.
• Branchez l’appareil dans une prise sur un circuit différent du circuit sur lequel le récepteur est branché.
• Consulter le revendeur ou un technicien radio/TV expérimenté pour obtenirde l’aide.
Cet appareil est conforme aux exigences de la FCC et de l’IC concernant l’exposition aux ondes dans un
environnement public ou contrôlé. Il est conseillé à l’utilisateur final de maintenir une distance de 20 cm
du contrôleur pour assurer la conformité aux réglementations d’exposition RF.
Information de conformité pour le Canada Déclaration de l’IC : Cet appareil est conforme à la norme
RSS d’Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil
ne doit pas causer d’interférences nuisibles, et (2) cet appareil doit tolérer toutes les interférences, dont
les interférences pouvant causer un fonctionnementnon désiré. Cet appareil numérique de classe B est
conforme à la norme canadienneICES-003.
Consulte el manual del usuario en línea para obtener instrucciones en español.
Need Help?
If you encounter a problem, please use the
following resources before retuning your
B-hyve to the store.
Scan the QR Code for access to a full
user manual, videos, and more.
call us
1-800-488-6156
Text us
801-797-2319
Community.Orbitonline.com