B.Pro BASIC LINE SK User manual

Mounting instructions
BASIC LINE module connectors
for BASIC LINE SK/UK, BASIC LINE W, BASIC LINE N and BASIC LINE EN
Preparation
1. Check package contents for completeness.
Module connection plate: 2 pcs
Mounting instructions
2. If applicable, remove side face shelves. Unscrew
fastening screws (1.) and remove side face
shelf/shelves (2.). Fig. 1
Caution!
Secure side shelf/shelves against falling.
Then screw fastening screws into unit housing again.
3. Push together units to be connected. Fig. 2
The ground must be level in the area where the unit
stands for proper mounting of the module connection
plate.
4. Unscrew the screws for the assembly of the module
connection plate on the guest and operator sides of
both units. Fig. 3
If one or more tray slides are mounted, they should
also be removed.
Caution!
Secure tray slide(s) against falling.
Fig. 1
Fig. 2
Fig. 3

Installation
1. Connect the units on the guest and operator sides
with a module connection plate and the screws
which were removed earlier. Fig. 4a
If one or more tray slides were mounted, they should
be reinstalled together with the module connection
plate. Fig. 4b
BLANCO Professional GmbH + Co KG
P.O. Box 13 10
75033 Oberderdingen
Germany
Phone [phone] - 81416
Fax [phone] - 81508
[e-mail]
www.blanco-professional.de
Fig. 4a
Fig. 4b
Document No. 154 405 –GB –Version 2.0 –6/15