Bartscher KST2200 Plus User manual

KST2200 Plus
107300

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: [phone]
Fax: [phone]
Technical Support Hotline: [phone]
www.bartscher.com
Version: 1.0
Date of preparation: 2021-02-15
EN

107300 1 / 30
Original instruction manual
1Safety............................................................................................................2
1.1 Explanation of Signal Words....................................................................2
1.2 Safety instructions....................................................................................3
1.3 Intended Use ...........................................................................................6
1.4 Unintended Use.......................................................................................6
2General information.......................................................................................7
2.1 Liability and Warranty ..............................................................................7
2.2 Copyright Protection ................................................................................7
2.3 Declaration of Conformity ........................................................................7
3Transport, Packaging and Storage................................................................8
3.1 Delivery Check.........................................................................................8
3.2 Packaging................................................................................................8
3.3 Storage....................................................................................................8
4Technical Data...............................................................................................9
4.1 Technical Specifications ..........................................................................9
4.2 Functions of the Appliance.....................................................................10
4.3 List of Components of the Appliance .....................................................11
5Installation and operation ............................................................................15
5.1 Installation..............................................................................................15
5.2 Operation...............................................................................................20
6Cleaning ......................................................................................................23
6.1 Safety Instructions for Cleaning.............................................................23
6.2 Cleaning.................................................................................................23
7Possible Malfunctions..................................................................................28
8Disposal....................................................................................................... 28

Safety
2 / 30 107300
EN
Diese Bedienungsa nleitung beschreibt di eI nstallation, Bedienu ngu nd Wartung des G erätsu ndg ilt als wichtige Infor mationsquelle und N achschlagewer k.Die Ke nntnis aller enthaltene nSic herheitshin weise und Handlungs anweisungen schaf ft dieV oraussetzung f ürd as sichere und sachger echte Arbeiten mit d emG erät.D arüber hin aus müssen die für den Eins atzbereich des Geräts gelt enden örtlichen Unfall verhütungsvorsc hriften und allgemeine n Sicherheitsbesti mmungen eing ehalten werden. Diese Bedi enungsanleitung is t Bestandteil des Prod ukts und muss in unmitt elbarerN ähe des Geräts für das In¬stall ations-, Bedienungs- , Wartungs- und Reinigu ngspersonal jederzeit z ugänglich auf¬b ewahrt werden. Wenn das Ger ät an eine dritte Person
weitergegeben wird , muss die Bedienungsa nleitung mit ausgehä ndigt werden.
Read this instruction manual before using and keep it available
at all times!
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.

Safety
107300 3 / 30
EN
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
,di e
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
1.2 Safety instructions
Electrical Current
•Too high a mains voltage or incorrect installation may cause electric shock.
•The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
•To avoid short-circuit, the appliance should be kept dry.
•If there are malfunctions during operation, disconnect the appliance from the
power supply.
•Do not touch the appliance’s plug with wet hands.
•Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
•Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
•Do not transport the appliance, holding it by the power cord.
•Do not allow the power cord to come into contact with heat sources or sharp
edges.
•Do not bend, pinch nor knot the power cord.

Safety
4 / 30 107300
EN
•Always completely unwind the power cord.
•Never place the appliance or other objects on the power cord.
•Always take hold of the plug to disconnect the appliance from the power supply.
•Check the power cord regularly for damage. Do not use the appliance if the
power cord is damaged. If this cable is damaged, it must be replaced by
customer service or a qualified electrician in order to avoid dangers.
Flammable Materials
•Never subject the appliance to contact with high temperature sources, e.g.:
oven, furnace, open flame, heat generating devices, etc.
•To avoid fire hazard, clean the appliance regularly.
•Do not cover the appliance with, e.g., aluminium foil or cloths.
•Use the appliance only with materials designated to this end and with correct
temperature settings. Materials, groceries and left-overs remaining in the
appliance may catch fire.
•Never use the appliance near flammable or inflammable materials, e.g.: petrol,
spirit, alcohol, etc. High temperature triggers evaporation of these materials,
and, as a result of contact with sources of ignition, an explosion may occur.
•In case of fire, disconnect the appliance from the power supply before
attempting suitable fire-extinguishing actions.
•Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
Hot Surfaces
•Surfaces of the appliance become hot during operation. Burning hazard! High
temperature remains for some time after switching the appliance off.
•Do not touch any hot surfaces of the appliance. Use the provided handling
elements and holders.
•You may transport and clean the appliance after it cools down entirely.
•It is prohibited to sprinkle hot surfaces with cold water or flammable liquids.
Operating Personnel
•The appliance may only be operated by qualified personnel and trained
specialist personnel.
•This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.

Safety
107300 5 / 30
EN
•Children should be supervised to ensure that they are not playing with or
switching on the appliance.
Supervised Usage only
•Only supervised appliance may be used.
•Always remain in an immediate vicinity of the appliance.
Improper Use
•Unintended or prohibited use may cause damage to the appliance.
•The appliance may only be used when its technical condition is flawless and
allows for safe operation.
•The appliance may only be used when all connections are executed according
to rules of law in force.
•The appliance may only be used when it is clean.
•Use only original spare parts. Never attempt to repair the appliance on your own.
•Do not introduce any changes in the appliance nor modify it.

Safety
6 / 30 107300
EN
1.3 Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
–concurrent usage of 2 suitable cookware pieces in front of the guests.
1.4 Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.

General information
107300 7 / 30
EN
2 General information
2.1 Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
–failure to observe instructions,
–unintended use,
–technical alterations introduced by the user,
–usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
2.2 Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.

Transport, Packaging and Storage
8 / 30 107300
EN
3 Transport, Packaging and Storage
3.1 Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
–in closed rooms;
–in dry and dust-free surrounding;
–away from aggressive agents;
–in a location protected against sunlight;
–in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.

Technical Data
107300 9 / 30
EN
4 Technical Data
4.1 Technical Specifications
Name:
Front cooking station KST2200
Plus
Art. No.:
107300
Material:
CNS 18/10
Dimensions of glass top (W x D x H), in
mm:
1.075 x 740 x 345
Number of utility niches:
1
Utility niche surface dimensions (W x D x
H), in mm:
805 x 600
Sockets:
4, 2 x 230 V, 2 x 400 V 16A CEE
Dimensions of shelf below utility niche (W
x D x H), in mm:
805 x 600 x 150
Number of labyrinth filters:
2
Filter material:
Stainless steel
Flame protection filter, type:
A
Fan regulation levels:
4
Number of zeolite filters:
2
Swivel castors:
4, which can be locked into place
Connected load:
20 kW | 400 V | 50/60 Hz
Dimensions (W x D x H), in mm:
1.125 x 840 x 1.265
Weight, in kg:
110,0
We reserve the right to implement technical modifications.

Technical Data
10 / 30 107300
EN
Version / Characteristics
•Equipment connection: 3 NAC
•Version of glass top on operator side: open
•Equipped with:
–shelf below utility niche, W 805 x D 600 x H 150 mm
–4 GN containers 1/9 GN, 100 mm deep, for oils, sauces, cutlery
–integrated ventilation system with labyrinth filter
•Properties of utility niches:
–Display area: W 805 x D 600 mm
–appliance designed for 2 table-top units
–4 sockets: 2 x 230 V, 2 x 400 V 16 A CEE
•Lighting: LED, on the sneeze guard
•ON/OFF switch
•Indicator light: ON/OFF
•The set does not include:
–electrical appliances
–platforms
–side shelf
–tray slide shelf
4.2 Functions of the Appliance
The mobile cooking station KST2200 Plus was designed for professional use.
Owing to the possibility of using even 2 suitable appliances, the appliance is very
versatile in use in catering, for events, as well as for cooking in front of the guests.

Technical Data
107300 11 / 30
EN
4.3 List of Components of the Appliance
Fig. 1

Technical Data
12 / 30 107300
EN
Description for Fig. 1
1. Ventilation with labyrinth filter (2 pcs)
2. LED lighting strip
3. Mains sockets, left + right side
4. Sneeze guard
5. Glass top
6. GN containers shelves (4 pcs)
7. Utility niche on the appliance
8. Grease collection container
9. Swivel castors (4 pcs)
10.Filter screen
11.Shelf
12.Operating elements
13.Zeolite filter (2 pcs)
14.Activated carbon filtering mat
Operating Elements / Assigned Fuses —Mains Sockets
Fig. 2
15.Lighting switch
16.Fan motor switch
17.User 1 / mains socket with safety contact on the left front side, 230 V 16 A
18.User 2 / mains socket with safety contact on the rear side, 230 V 16 A
19.Fan + lighting fuse
20.User 4 / CEE socket on the right side: 5-pole, 400 V 16 A
21.User 3 / CEE socket on the left side: 5-pole, 400 V 16 A

Technical Data
107300 13 / 30
EN
Auxiliary Equipment (not included in the scope of delivery)
Platform 100 KST Plus
Nickel-chrome steel 18/10
Dimensions: W 400 x D 595 x H 100 mm
Weight: 3.08 kg
Art. No. 107276
Fig. 3
Platform 200 KST Plus
Nickel-chrome steel 18/10
Dimensions: 400 x D 595 x H 200 mm
Weight: 7.37 kg
Art. No. 107277
Fig. 4
Side shelf KST Plus
Material: nickel-chromium steel 18/10
Assembly side: left/right
Fixing material included
Dimensions: W 700 x D 350 x H 80 mm
Weight: 4.35 kg
Art. No. 107279
Fig. 5
Zeolite filter KST Plus
Materiał: zeolite
Dimensions: 462 x D 380 x H 16 mm
Weight: 3.642 kg
Art. No. 107274
Fig. 6

Technical Data
14 / 30 107300
EN
Tray slide shelf KST2200 Plus
Material: nickel-chromium steel 18/10
The set includes: Fixing material
Dimensions: 1,110 x D 340 x H 125 mm
Weight: 4.092 kg
Art. No. 107289
Fig. 7
Activated carbon filtering mat
KST2200 Plus
Material: activated carbon
Dimensions: 755 x D 440 x H 11 mm
Weight: 0.143 kg
Art. No. 107291
Fig. 8
Combinations of Appliances for Cooking Station
The following Bartscher appliance may be used with the cooking station:
Appliances That May Be Used Without Platform:
•Electric cooker, 2 plates, without chimney –650 Snack series, Art. No. 115006
(available on demand)
•Grill plate, smooth, 400 mm wide, without chimney –650 Snack series, Art. No.
115118 (available on demand)
•Bain-marie, 1 x 1/1 GN, without chimney –650 Snack series, Art. No. 115121
(available on demand)
•Fryer, 10 litres, without chimney –650 Snack series, Art. No. 115214 (available
on demand)
•Utility element, 400 mm wide, without chimney –650 Snack series, Art. No.
115117 (available on demand)
•Electric cooker, 2 plates –600 Imbiss series, Art. No. 131723
•Electric cooker, 2 hobs –600 Imbiss series, Art. No. 131800
•Grill plate, smooth, 400 mm wide –600 Imbiss series, Art. No. 132115
•Bain-marie, 3 x 1/4 GN –600 Imbiss series, Art. No. 131760
•Grill plate GDP 320E, smooth, Art. No. A370031
•Grill plate GDP 320E, ribbed, Art. No. A370035
•Multi Pan 300, Art. No. 370205

Installation and operation
107300 15 / 30
EN
Appliances That Require Usage with Platform 100 KST Plus:
•Induction wok IW 35 PRO-2, Art. No. 105732
•Induction wok, Art. No. 105840
•Induction wok, Art. No. 105871
•Induction wok, Art. No. 105872
Appliances That Require Usage with Platform 200 KST Plus:
•Electric cooker, Art. No. 104904
•Electric cooker, Art. No. 104906
•Induction cooker IK 30T-1, Art. No. 105991
•Induction cooker IK 30TCS-1, Art. No. 105991S
•Induction cooker IK 35TC, Art. No. 105843
•Induction cooker IK 35TCS, Art. No. 105843S
•Induction cooker IK 35SK, Art. No. 105837
•Induction cooker, Art. No. A105942
•Induction cooker, Art. No. 105984
•Induction cooker, Art. No. 105993
•Induction cooker, Art. No. 105994
•Induction wok IW 35, Art. No. 105986
5 Installation and operation
5.1 Installation
CAUTION!
Incorrect installation, positioning, operation, maintenance or misuse of
the appliance may lead to personal injury or property damage.
Positioning and installation, as well as repairs may be performed by
authorised technical service only and in compliance with the applicable
national law.
NOTE!
The manufacturer disclaims all liability and provides no warranty for
damages, which may be attributed to non-observance of regulations or
incorrect installation.

Installation and operation
16 / 30 107300
EN
Unpacking / Positioning
•Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
•If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
•Be careful not to damage the rating plate and warning labels fixed on the
appliance.
•Never place the appliance in humid or wet environment.
•Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
•The appliance should be placed on surfaces that are:
–even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
–sufficiently large, and thus enabling usage of the appliance with no
problems;
–easily accessible;
–well ventilated.
•Never cover the ventilation openings in the appliance.
•During operation, provide for sufficient ventilation in a room, where the
appliance is installed.
•Never place the appliance directly next to walls, furniture, or other objects made
of flammable materials.
•Maintain at least 10 cm clearance between the sides and back of the appliance,
and walls and other objects. Observe fire-fighting regulations in force in the
installation area.
•When it is not possible to maintain the recommended clearance, use
appropriate protection measures (e.g. heat-resistant film) that will ensure
keeping the wall temperature within the safe range (up to 60°C).

Installation and operation
107300 17 / 30
EN
Glass Top Assembly
1. Install the glass top on the housing of the cooking station, observing the
following instructions:
2. Glass elements on the left and right side, and at
the back, stick in glass fittings on the housing of
the cooking station.
3. Connect glass elements together, using the
enclosed angles, cylindrical head bolts, rubber
rings and locking bolts.
Fig. 9
4. Then, place the top glass element onto glass
elements on the left and right side, and at the
back, and screw them to angles at the left and
right side, and at the back.
5. To end with, check if all glass elements are
correctly secured.
Fig. 10
Assembly of Remaining Accessories (Optionally)
Side shelf
Fig. 11
The side shelf may be fitted on the right and/or left side.

Installation and operation
18 / 30 107300
EN
1. Fix 2 brackets (A) (included in delivery of the side shelf), using delivered
spacers and bolts, on the right and/or left side of the cooking station (availably
by factory default).
2. Place the side shelf onto the brackets (B).
If the side shelf is not used, it may simply be closed (C).
Tray slide shelf
Fig. 12
1. Fix 2 brackets (A) (included in delivery of the tray slide shelf), using delivered
spacers and bolts, on the rear side of the cooking station (availably by factory
default).
2. Hang the tray slide shelf on both brackets (B) and fix it with the lever (C).