BAB BAB'So User manual

Page 1
USER MANUAL
Additional Safety Kit
BAB’So
Congratulations on having acquired a BAB’So. This additional Safety
kit is not just an object, it exists to help the person wearing it and any
accompanying people. It has been designed with your personal safety in
mind. It was invented through necessity when practicing various sports in
the countryside or city.
Please take some time to familiarise yourself with the kit. Try it out several
times to ensure you are perfectly comfortable using it. It can be worn rolled
up or flat. Remember to fix the life line to a support (body or piece of
equipment).
The BAB’So needs no external power to operate. It does however
need the person wearing it or someone nearby to be conscious in order
to activate it. Ensure that the phosphorescent tubes have not expired
(valid for 2 years) or have not been used (unbroken).
The BAB’So is an additional safety kit. It does not preclude the use
of other safety devices. Remember, the BAB’So is not a buoy,
but a device designed to assist finding and identifying the wearer.
Be careful not to bend the phosphorescent tubes when installing them.
Ensure that the mast is correctly positioned in the pennant. There are 2
holes for inserting the tubes. One in the centre and another on the side. The
central hole must be within the concave (hollow) part of the mast. (See
Figure A below).
Do not force the mast by pinching or bending it or you may damage it.
You will find information and videos at www.bab.bzh/tutos

Page 2
EQUIPMENT SUPPLIED
In the BAB’So kit, you will find :
-Everything you need for your safety,
-The Envelope (1), in which you will find:
-The floating pennant (2), comprising :
A high-visibility Flag (3) to ISO20471,
ISO20471 high-visibility retro-reflective bands (4),
2 retro-reflective strips (5)
1 folding mast (6)
2 phosphorescent tubes (7) valid 2 years; emits about
10 hours of light
A light-reflecting strip (8)
A pouch to contain the personal and medical ID strip(9)
-A lifeline (10)
-A whistle (11)
-A connecting lanyard (12), resistant to 150kg of traction.
-2 personal and medical ID strips (13)
-2 Velcro strips for attaching to equipment (14)
-1 protective Velcro strip (15)
-Instruction manual.
(1)
(3)
(2)
(6)
(10)
(7)
(8)
(9)
(12)
(11)
(4)
(5)
Figure A
(15)
(14)

Page 3
PREPARING THE EQUIPMENT
The first thing to do it to personalize your BAB’So kit, using the
personal and medical ID strip (13).
Take the personal and medical ID strips (13), and a fine-pointed indelible
pen (for example Staedtler® S model, sold separately).
-Complete your personal information::
Name
Male / Female
Blood group
Emergency contact
Allergies and other health data, social security number
-Wait a few minutes for the ink to dry
-Slip the personal and medical ID strips (13) into the transparent
pocket provided (9) on the pennant (2).
-You can write the information in any language of your choice.
You have just personalised your BAB’So Kit. It is now devoted to you
and can be used to help in your rescue.
Now, you are going to stow the whole kit in the Envelope:
-Attach the whistle strap (11) to the connecting lanyard (12). To do
so, tie a fisherman’s knot in the lanyard with about an arm’s length of
distance between the bottom of the flag and the knot. This means the
whistle can be used at the same time as the pennant.
-Check that the folding mast (6) is present in the flag lining (3) .
-Carefully fold the connecting lanyard (12) along the mast, held by
winding the pennant around it and leaving about 15 cm of lanyard
free.
-Roll up the flag sufficiently tightly around the mast (6), to be able to
slip it easily into the envelope (1). (Figures B+C+D)
-Slip the whole kit into the envelope (1). Caution : The concave part
of the mast (6) must be facing the lifeline (10). (Figure E)
-The whistle (11) is placed just under the tab, at the opening, to be
able to access it rapidly.
Figure B
Figure C
Figure D
Figure E
Figure F

Page 4
INSTALLING THE EQUIPMENT
The BAB’So kit is versatile and can be worn on the wrist or the ankle,
on belt loops, or attached to a life jacket (rolled up or flat). It is
recommended to place the kit on a piece of equipment that you have
with you at all times when practicing your sport.
On the wrist:
-Place the lifeline (10) around your wrist. (Figure G)
Adjust the size of the lifeline to a smaller wrist by tying a knot,
leaving a sufficient margin of comfort. (Limbs may swell during
effort)
-Adjust the position of the pennant in the envelope.
Small sizes: push the pennant (2) to the end of the
envelope (1).
Large sizes: pull the top of the flag to the opening of
the envelope (1).
-Place the envelope against your torso with the opening facing
upwards. (Figure H)
-Hold the kit against your torso with your wrist. Roll the envelope
around your wrist and close it using the Velcro strips. Adjust for
maximum comfort, while ensuring the kit is firmly in place. (Figures
I+J+K)
-If necessary (for large sizes), install the protective strip (15) to
prevent the Velcro strip from chaffing.
On the ankle:
(As for the wrist)
-Install the lifeline (10)
-Roll the envelope around your ankle and close it using the Velcro
strips. Adjust for maximum comfort, while ensuring the kit is firmly in
place.
On belt loops :
-Install the lifeline (10) around the belt loop of your trousers or on the
belt. Use the belt loops to the side preferably.
-Slide the envelope through the belt loop from front to back, to enable
easy access.
-If necessary, use the Velcro strips (14) to attach firmly.
On a lifejacket (example of attachment) :
-Place the kit flat. Install the lifeline (10) onto the lifejacket buckle
strap (between the lifejacket and the buckle), so that the
BAB’So remains in place when the lifejacket is opened.
-Wind the envelope (1) around the strap, leaving the opening easily
accessible.
-Ensure that the pennant (2) can be easily pulled out. If necessary,
loosen the winding of the kit.
Figure G
Figure I
Figure J
Figure K
Figure H

Page 5
On a piece of equipment:
-Can be attached flat or rolled up.
-Make sure your Kit is placed so that it is easily accessible and can be
used in a situation of distress.
ACTIVATING AND USING THE KIT
In the event of distress, the BAB’So allows you to signal. It also means
you can be located visually (high-visibility orange, retro-reflective bands,
phosphorescent light tubes, mirror effect (day or night) reflective band.
You can also use the whistle to call for attention.
To use the kit optimally, you need to get used to handling it.
-To activate the device:
Pull on the Velcro band.
The envelope (1) will stiffen
Pull the pennant (2) fully out of the envelope (1) using
the tab
A lanyard (12) connects the envelope (1) to the
pennant (2). It is used:
oso as not to lose the pennant
oto move the position of the kit safely
(from the ankle to the wrist for
example)*
oas a means of holding on, attaching or
pulling yourself up
(to a branch or a rock for example)
Note: this is not a lifting strap, but a
potential aid only.
Wave the pennant (2) to deploy it fully and increase
your visibility. The band (8) can reflect the light.
In the event of fatigue, place the pennant on your body
at the highest point possible; for example, on your
head if you are in a vertical position.
There is about 30cm of lanyard available that you can
use to attach it to your head; tie a knot on the other
tab to adjust it to your head. Adjust the size according
to other sports equipment (helmet, bonnet, etc.)
If you are in the dark, use the phosphorescent tubes
(7). Bend the tubes to activate the light (be careful not
to puncture them). If you have physical capacities, just
pull out half the tube, bend it to activate the light and
replace it in its housing. This will provide twice as much
light time. Otherwise, bend the 2 lights to activate
them without removing them from their housing. In this
case, fold the mast also. Each tube emits around 10
hours of light (manufacturer’s data).

Page 6
When you hear the emergency services, even if you
cannot see them, wave the pennant (2) above you
using the connecting lanyard (12).
The personal and medical ID strip (13) will provide the
emergency services with vital information.
* To move the kit:
Take the pennant (2) out of the envelope (1),
Wind the pennant and the lanyard (12) around the other position to
secure the kit firmly.
Detach the lifeline (10) and place it at the chosen position.
Check it is securely attached before releasing the pennant and the
lanyard.
REPEAT USE / STORAGE
To use your BAB’So, kit again, clean it (with fresh water) and let it dry
in the air.
-Replace the phosphorescent tube(s) (7) if necessary (optimal validity
2 years). Note; these tubes may last up to 5 years, but between 2
and 5 years the light may be weaker. We advise you to replace them
every 2 years.
-See instructions Page 3.
Now, your BAB’So is ready for use again.
To store the kit, ensure it is completely dry and place it in a dry, ventilated
place. Keep flat preferably.
The retro-reflective strips may become crumpled. This does not hinder their
operation in any way.

Page 7
AFTER SALES SERVICE
The BAB’So is guaranteed for one year following the date of purchase.
The warranty can be exercised if you notice abnormal deterioration of the
product or any part of the product during normal use. (CONSUMABLES
ARE NOT GUARANTEED: PHOSPHORESCENT TUBES, LIGHT
REFLECTIVE STRIP, PERSONAL AND MEDICAL ID STRIP).
To exercise the warranty, send back the after-sales form fully completed.
After-sales form (www.bab.bzh/sav, or on request) to be completed and
sent back at your expense:
Post : SAV Balises-Appel-Bienveillance - LD Croas Pilo - 29 720 PLOVAN
We will pay for return post.
WARNINGS
Read the instructions before use.
Not suitable for use by children under 3 years of age. Small parts, danger of
choking. Risk of strangulation.
It is essential for children, that an adult explains and demonstrates the
operation and warns of the risks.
This kit is not a toy, only use if needed. It may trigger an expensive
emergency response.
Ensure that anyone in possession of a BAB’So, kit, is able to
understand how to use it without placing themselves or other people in
danger.
The phosphorescent tubes contain chemicals. If the contents of the tube
come into contact with the skin or eyes, rinse immediately with clean water.
If problems persist, rapidly consult a doctor.
Do not place in the microwave oven, washing machine or dryer.
Do not burn.
Do not use in the event of lightning.