Baby Jogger Bassinet Kit User manual

CITY SELECT BASSINET KIT
Assembly Instructions
www.babyjogger.com
1From existing City Select Seat: Remove
seat from seat frame by unsnapping
all fabric and unfastening Velcro strap
around the footwell.
Box Includes:
1 Bassinet Fabric
1 Foot Bar
1 Foot Cover
Other Items Needed:
(From existing stroller seat)
1 Seat Frame
1 Canopy
2Remove footwell frame from upper seat
frame by pressing buttons on both sides
of footwell and gently pulling until the
pieces separate.
3Insert Foot Bar from the Bassinet
Kit into the seat frame until it clicks
into place.
4Place bassinet within seat frame so the
top of the seat frame is aligned with
the top of the Bassinet.
Note: The top of the seat frame and
top of the Bassinet are marked “TOP”
for your convenience.
5 Attach upper U-shaped bassinet support
rod around the top section of the seat
frame on both sides.
6 Fasten all snaps around the top portion
of the Bassinet to the top portion of the
seat frame.
8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227 • T: 800-241-1848 • F: 804-262-6277 • www.babyjogger.com

10 Fasten canopy Velcro to Velcro on Bassinet.
NOTE: The canopy
on your bassinet
is multi-directional
and may be
adjusted depending
on the direction of
the sun.
7 Attach lower U-shaped Bassinet support
rod around the lower section of the seat
frame on both sides.
8 Fasten all snaps around lower portion of the
Bassinet to the lower portion of seat frame.
To Attach Canopy: Use your existing seat’s
canopy for the Bassinet canopy
9 Unzip mesh canopy fabric and set aside.
Snap canopy brackets to both sides of
seat frame.
NOTE: The mesh canopy fabric can be attached to the front
of the canopy and used as a bug canopy for your bassinet.
To Attach Foot Cover:
11 Fit Foot Cover around lower portion
of Bassinet and fasten to Velcro below
mounting bracket.
12 Lift canopy Velcro to reveal the snap
location for the Foot Cover.
Snap Foot Cover to this snap and
refasten canopy Velcro.
13 Align Bassinet bracket adaptors with
mounting brackets on your stroller. Press
firmly until bassinet clicks into place.