Baby Jogger City Elite 2 User manual

©2019 Baby Jogger NWL0000979363B 8/19
babyjogger.com
ASSEMBLY INSTRUCTIONS
CITY
ELITE®2
Stroller

2
1 Handlebar
2 Wrist Tether
3 Handlebar Fold Button
4 Canopy
5 Auto-Lock
6 Harness Pads
7 Harness Buckle
8 Crotch Strap Pad
9 Fold Strap
10 Rear Wheel
11 Rear Wheel Release Button
12 Leg Support
13 Footwell
14 Storage Basket
15 Front Wheel
16 Swivel/Lock
17 Front Wheel Release Button
18 Parking Brake
19 Seat Recline Strap
1
3
4
9
10
5
14 15
1617
11
7
12
8
13
6
19
18
9
5
2
10

3
3
5
4
1
76
2
CLICK!

4
8
11
910
1312
CLICK!

5
16
15
17
14
SNAP!
SNAP!

6
20
19
21
22
18

7
23 24
25
28
26
27

8
31
32
SNAP!
CLICK!
30
29

9
33 34
35
39
37 38
36

10
43 44
41 42
C
B
A
40
A
B
C
41

11
WARNING
IMPORTANT - Keep these instructions for future
reference.
Read these instructions carefully before use.Your
child’s safety may be aected if you do not follow
these instructions.
SINGLE STROLLER
• This stroller seats one passenger.NEVER allow
more than one child at a time on this stroller.
• This stroller is suitable for children from birth to
34 kg.Maximum height:112 cm.
• Total weight load recommended for this stroller
is 39.5 kg, 34 kg in seat, 1 kg in seat back
pocket and 4.5 kg in basket. Excessive weight
may cause a hazardous unstable condition to
exist.
WARNING: TO AVOID INJURY OR DEATH:
• ALWAYS APPLY THE BRAKES WHENEVER
THE STROLLER IS STATIONARY.
• DO NOT LEAVE CHILDREN UNATTENDED.
• SECURE THE CHILD IN THE HARNESS AT
ALL TIMES.
• DO NOT CARRY EXTRA CHILDREN OR BAGS
ON THIS STROLLER.
• MAKE SURE CHILDREN ARE CLEAR OF
ANY MOVING PARTS IF YOU ADJUST THE
STROLLER.
WARNING: USE THE STRAP TO STOP THE
STROLLER ROLLING AWAY.
WARNING: USE THE HARNESS AT ALL TIMES.
• This stroller is not suitable for running, jogging,
skating or rollerblading.
• Always use the restraint system.
• Check that the pram body or seat unit
attachment or car seat attachment devices are
correctly engaged before use.
• To avoid injury, ensure that your child is kept
away when unfolding and folding this product.
WARNING: NEVER LEAVE THE HARNESS
BUCKLED WHEN NOT FITTED TO A CHILD.
THE HARNESS CAN FORM LOOPS THAT POSE
A STRANGULATION HAZARD TO THE CHILD.
• Accessories which are not approved by the
manufacturer or distributor shall not be used.
• Do not let your child play with this product.
• Parcels or accessory items, or both, placed
on the unit may cause the unit to become
unstable.
• Any load attached to the handle and/or on
the sides of the stroller aects the stability and
folding mechanism of the stroller.
• Ensure that all the locking devices are engaged
before use.
• When loading and unloading child, lock the
front wheel in a fixed position.
• Lock the brakes before loading and unloading
your child and whenever the stroller is not
moving.
• Avoid serious injury from falling or sliding
out.Always properly adjust and fasten safety
harness.
• Stroller is not meant to be used for transporting
children up or down stairs, travelators, or
escalators .Damage resulting to stroller will not
be covered under warranty.
• Be aware of the risk of open fire and other
sources of strong heat, such as electric bar fires,
gas fires, heaters, etc, in the near vicinity of the
stroller.
• This stroller is designed for use on flat or gently
sloping surfaces.Be aware that the possibility
for tipping occurs if this product is used on
higher sloping and uneven surfaces.
• Always keep fingers away from moving parts
when folding, unfolding, or adjusting the stroller
to prevent finger/body part entrapment or
pinching.
• To prevent injury, remove Child Tray or Belly
Bar accessory when folding or unfolding the
stroller.
• Before lifting and carrying the stroller, make
sure the storage lock is properly secured.
• This stroller does not replace a cot or a bed.
Should your child need to sleep, then it should
be placed in a suitable pram body, cot, or bed.
• Watch out for cars - never assume that a driver
can see you and your child.
• The passenger shall remain seated (no
standing in the stroller).
• It may be unsafe to use replacement parts
other than those supplied or approved by Baby
Jogger.
EN

12
FRAME
1 Unpack the stroller frame from the box
and set the wheels aside.
Unlock the stroller by pulling the auto-
lock lever.
2 Unfold the stroller by pulling the
handlebar away from the frame.The
stroller will lock into place and you will
hear a click.
3 Place the stroller in the upright position.
WARNING: Ensure that all the locking
devices are engaged before use.
FRONT WHEEL
4 Installation
• Lay stroller on its back so the handlebar
is resting on the floor.
• Attach the front wheel by sliding it into
the front wheel mount until it clicks.
Gently pull on the front wheel to make
sure it is properly attached.
5 Removal
• While pressing the front wheel release
button, gently slide the front wheel out
of the front wheel mount.
SWIVEL FEATURE
6 Push the swivel button down and
rotate to the left to lock the front wheel
assembly in a fixed position for long
distance strolling.
7 Push the swivel button down and rotate
to the right to allow the front wheel
assembly to swivel.
WARNING: When loading and unloading
child, lock the front wheel in a fixed
position.Although the front wheel of
your stroller locks, it is not intended for
jogging or exercise purposes.
REAR WHEELS
8 Installation
• Align the rear wheel axle with the wheel
mount on the stroller frame and insert
it into the wheel mount until it locks into
place.You will hear a click.
• Gently pull on the rear wheel to make
sure it is properly attached.
9 Removal
• While pressing down on the wheel
release button, gently slide the rear
wheel out of the wheel mount.
HANDLE
10 Press the handle release buttons on
both sides and rotate up or down to the
new position.
BRAKE
11 To Lock the Brakes: gently pull the Brake
Lever into upright position until it clicks
into place.
12 To Release the Brakes: Pinch the gray
tabs and pull the lever towards you.
Push the Brake Lever down until it is
parallel with the frame.
WARNING:Lock the brakes before
loading and unloading your child and
whenever the stroller is not moving.
CANOPY
13 Attach the canopy to the frame by
sliding the canopy onto one of two
mounting brackets.
NOTE: When using a City Go car seat,
the canopy must be in the top position.
For all other car seats, canopy must be
removed.
14 Snap the two snaps to the stroller frame.
15 Zip the back of the seat to the canopy
top.Attach the 2 fastening strips on teh
side of the canopy.
16 Pull forward to open canopy and push
backwards to close canopy.
17 To use the canopy window, roll the
shade up towards the top and secure
with the elastic and button.
18 To use the side vents, lift the vent cover
and the magnet will attach to the
canopy bow.
ADJUSTING SAFETY HARNESS
19 From the back of the seat, undo the
fastening strip and open the pocket to
locate the plastic square stopper.Turn
stopper and pass through the openings
in the PE board and seat fabric.
20 Reinsert stopper at seat opening closest
to child’s shoulders.Pass back through
seat fabric and PE board.Tug on strap
to ensure stopper is locked.Repeat on
both sides.
EN

13
WARNING: Avoid serious injury from
falling or sliding out.Always properly
adjust and fasten safety harness.
WARNING: Always use the crotch
strap in combination with the shoulder
straps and waist belt.
21 Slide the harness pads up to access
plastic guide on strap.
22 Hold the plastic guide and pull strap to
tighten or loosen.
USING SAFETY HARNESS
23 Insert side strap buckle into harness
buckle on both sides.
24 Insert connected harness and side
strap buckles into the sides of the
crotch buckle.
25 Press button on crotch buckle to
release.
RECLINE THE SEAT
26 Pinch the clamp behind the seat, and
slide it down to desired recline.
27 Pull seat down on both sides to match
the clamp position.Reverse steps to
return to the upright position.
WARNING: When making adjustments
to the stroller seat, make sure child’s
head, arms, and legs are clear of
moving seat parts and stroller frame.
28 For extra ventilation, roll up the seat
back flap and secure with elastic and
button.
LEG SUPPORT
29 To use the leg support, lift the front of
the seat pad.
30 Rotate the support arm out and lower
the seat pad.Lock the support arm.
31 To lower leg support, reverse the steps.
FOLDING
• Remove your child from the seat.
• Disengage front wheel swivel locks.
• Remove all attachments and all items
from basket.
32 Press buttons on both sides of frame.
Rotate handle up.
WARNING: To prevent injury, remove
Child Tray or Belly Bar accessory when
folding or unfolding the stroller.
33 Insert index finger into small loop, pull
up on the “Pull to Fold” folding handle,
and let the frame colapse.
34 Make sure the auto-lock lever clicks
into place.
35 Place stroller upright in standing
position.
BASKET REMOVAL
36 From the front of the stroller, unsnap
the 2 snaps and pull the straps out of
foot well.
37 Lift basket o the hook.
38 From the back, lift the top of basket o
the tab on both sides of frame.
39 Remove the strap from the C clamp
on both sides of frame.
REMOVING THE SEAT PAD
40 Flip the stroller over to expose the seat
bottom.
AUnfasten the 2 fastening strips and
pull then out of the stroller frame.
BUnfasten the fastening strip and pull
them out of the sides of the stroller
frame.
CUnscrew the right carabiner hook
and pull strap out from the seat pad.
41 Flip the seat back over on its wheels.
Pull seat fabric up and o of buttons.
42 Starting from the bottom, slide the seat
pad out from stroller frame on both
sides.
43 From the top, slide the seat pad out of
the frame on both sides.
44 Remove seat pad.
Reverse the steps to reattach the seat pad
to the frame.
EN

14
EN CARE AND MAINTENANCE
To preserve the longevity of your stroller,
it is important to perform simple, regular
maintenance.From time to time, make sure
that the joints and folding areas are still in
good condition.If you hear any squeaking
or feel tension, you can take your stroller
to a local bike shop for added lubrication.
All repairs should only be carried out by an
authorized dealer.
WASHING
Seat Fabric
• DO NOT machine wash fabrics.
• The seat and canopies of our strollers
and joggers are made from strong,
lightweight, washable fabrics which easily
detach from the frame.We recommend
to hand wash your fabrics using cold
water and a mild detergent.Place fabrics
back on the frame and leave outside to
air dry.A hot/sunny day is the perfect
time to clean your stroller as fabrics will
dry quicker.
• If the seat covers need to be replaced,
only use parts from a Baby Jogger
Authorized Dealer.They are the only
ones that are guaranteed to have been
safety tested and designed to fit this
seat.
Plastic/Metal Parts
• Wipe clean using a mild soap and warm
water.
• You must not remove, dismantle or alter
any part of the seat folding mechanism
or brakes.
Wheel Care
• The wheels can be cleaned using a
damp cloth.They will need to be dried
completely with a soft towel or cloth.
STORING
• Sunshine can fade seat fabric and dry
out tires, so storing your stroller indoors
will prolong its good looks.
• DO NOT store outside.
• Ensure that the stroller is dry before
storing for prolonged periods.
• Always store the stroller in a dry
environment.
• Store the stroller in a safe place when
not in use (i.e.where children cannot
play with it).
• DO NOT place heavy objects on top of
the stroller.
• DO NOT store the stroller near a direct
heat source such as a radiator or fire.

15
PLEASE DO NOT CONTACT THE PLACE OF PURCHASE FOR PARTS OR WARRANTY ISSUES
Baby Jogger warrants that the frame is free of manufacturer defects for the lifetime of the
product.Manufacturer’s defects include but are not limited to the breaking of welds and frame
tube damage.Textile or soft side materials and all other components shall be warranted for
one year from the date of purchase (except for tubes and tires).Proof of purchase is required
to make a warranty claim and the warranty is only extended to the original purchaser.
Your stroller comes with a limited lifetime warranty on the frame and a 12 month warranty on
textiles and mechanical components.Visit www.babyjoggerstrollers.com.au to register your
new stroller and we’ll extend your warranty by a further 12 months.
THIS WARRANTY DOES NOT COVER:
• Normal wear and tear
• Corrosion or rust
• Incorrect assembly, or the installation of third party parts or accessories not compatible
with the original design.
• Accidental or intentional damage, abuse or neglect, or use on stairs, travelators or
escalators.
• Commercial use
• Improper storage/care of the unit
This warranty specifically excludes claims for indirect, incidental, or consequential damages.
The implied warranties of merchantability and fitness for a particular purpose is according to
the specific warranty period for this model unit at time of purchase.Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.To know what your legal rights are in
your state, consult your local or state consumer aairs oce or your State’s Attorney General.
The benefits given to you by our warranty are in addition to other rights and remedies
under law in relation to the product. Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.Our goods also come with guarantees that
cannot be excluded under the New Zealand Consumer Guarantees Act.You are entitled
to a replacement or refund for a major failure and compensation for any other reasonably
foreseeable loss or damage.You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to a major failure.
If your stroller was purchased outside of the United States, please contact the distributor
in the country nearest you.Their contact information can be found on our website at
http://www.babyjogger.com/retailers/#international. Claims for warranty outside of the
country in which the product was purchased may incur shipping charges.
NOTE: When contacting Baby Jogger distributor regarding your stroller, please have your
stroller’s serial number ready.It can be found just below the hub on the outside of rear leg.
IN AUSTRALIA CONTACT:
Call: 1300.661.885
Fax: [phone]
Mail: The Amazing Baby Company
7-9 Maurice Court
Nunawading, Victoria 3131
Australia
IN NEW ZEALAND CONTACT:
Call: (64) 03.338.7613
Fax: [phone]
Mail: Baby First Limited
25 Nga Mahi Road
Sockburn Christchurch, 8024
New Zealand
Baby Jogger’s Limited Lifetime Warranty:

6655 Peachtree Dunwoody Rd.NE • Atlanta, GA 30328
1.800.241.1848 • www.babyjogger.com
Baby Jogger, LLC
Distributed in Australia By:
The Amazing Baby Company
7-9 Maurice Court • Nunawading VIC 3131 • Australia
T: 1300.661.885 • 03.8872.6772 • F: 03.9873.1433
www.theamazingbabycompany.com.au
Distributed in New Zealand By::
Baby First Limited
25 Nga Mahi Road • Sockburn Christchurch, 8042 • New Zealand
T: (64) 03.338.7613 • F: (64) 03 338 7615
www.babyfirst.co.nz