Backyard Creations Denali DEN-MC-2PK User manual

1of7
Owner’s Manual
Denali 4 Piece Seating Group
Deep Seating Rocker Chairs (2)
Model Number: DEN-MC-2PK
SKU Number: 272-1845

2of7
Parts List
Letter
Illustration
Description
Qty.
Letter
Illustration
Description
Qty.
A
Left Arm
2
L
M8 Washer
16
B
Right Arm
2
M
Split Lock
Washer
16
C
Back
2
N
M8 Nut
16
D
Seat
2
O
M6 Bolt Cap
20
E
Stationary
Rocker Base
2
P
M8 Bolt Cap
16
F
Steel Plate
16
Q
M8 Nut Cap
16
G
Spring Steel
Plate
4
R
Allen Wrench
2
H
M6 x 35mm Bolt
16
S
Open Wrench
2
I
M6 x 45mm Bolt
4
T
Back Cushion
2
J
M8 x 45mm Bolt
16
U
Seat Cushion
2
K
M6 Washer
20

3of7
Assembly Instructions
Deep Seating Rocker Chairs (2)
Note: For video instructions please visit:
https://insideout.store/video-assembly-instructions/
Important:
⚫Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury.
⚫Before assembling the product, remove all protective materials, hardware kit(s), and identify all
parts packed in the carton are present. (Note: If any part is missing or damaged, do not attempt to
assemble). Contact InSide Out Customer Support. See page 7.
⚫Assemble product on a soft and non-abrasive surface, such as carpet to avoid damaging the item.
⚫Two people are required to assemble heavy items.
WARNING: DO NOT TIGHTEN BOLTS UNTIL NOTED AFTER EACH STEP!
Step 1: Attach the Right Arm (B) to the Seat (D) using M6 x 35mm Bolt (H) and M6 Washer (K). Repeat
with the Left Arm (A). Do not tighten bolts until after Step 3. See Figure 1.
Figure 1

4of7
Step 2: Attach the Back (C) to the Seat (D) using M6 x 35mm Bolt (H) and M6 Washer (K). Do not tighten
bolts until after Step 3. See Figure 2.
Figure 2
Step 3: Attach the Right Arm (B) to the Back (C) using M6 x 45mm Bolt (I) and M6 Washer (K). Repeat
with the Left Arm (A). Tighten all bolts. See Figure 3.
Figure 3

5of7
Step 4: Position the Spring Steel Plates (G) on the top of the Rocker Base (E) using M8 x 45mm Bolts (J),
M8 Washers (L), and Steel Plates (F). Secure Spring Steel Plates (G) using the M8 x 45mm Bolts
(J) from the top and Steel Plates (F), Lock Washers (M) and M8 Nuts (N) from the bottom. See
Figure 4. Tighten bolts.
Figure 4
Step 5: Attach the Rocker Seat (D) to the Spring Plates (G) on the Rocker Base (E) using M8 x 45mm Bolts
(J), M8 Washers (L) and Steel Plates (F) from the top. Secure with Steel Plates (F), Lock Washers
(M) and M8 Nuts (N) from the bottom. See Figure 5. Tighten Bolts.
Figure 5

6of7
Step 6: Attach Bolt Caps (O) to Bolts (H) and (I). Attach Bolt Caps (P) to Bolts (J) and Nut Caps (Q) to
Nuts (N).
Turn the chair over and place the Seat Cushion (U) and Back Cushion (T) into place. Your chair is
now complete and ready for use. Enjoy! See Figure 6.
Figure 6
Note: Please see our video for additional assembly assistance:
https://insideout.store/video-assembly-instructions/

7of7
Care & Maintenance
Maintain your outdoor furniture by using furniture covers or storing out of the elements when not in use.
Frame: Clean frames with a mild soap and warm water. Do not use abrasive materials, cleaners or
bleach. Rinse with clean water and dry thoroughly. Always clean, drain and dry thoroughly
before storing for the winter.
Fabric: Cushions may be cleaned by hand with a mild solution of soap and water. Rinse cushions
thoroughly, stand on end and allow to drip dry. Do not machine wash or tumble dry, as
cushions may shrink. Do not use bleach or solvents on fabrics.
Warranty
You must retain the original receipt to obtain warranty service.
What is covered?
Frame: Frame is warranted against rusting for 1-year
Finish: Frame and glass finish is warranted against peeling, cracking or blistering for 1-year if the product
has not been scratched or abraded.
Fabric: Cushions are covered by a 1-year warranty against manufacturing defects.
What is not covered?
EXCLUSIONS: Furniture used for commercial, contract, or other non-residential purposes, or items
damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Discoloration or
fading of the finish or fabrics as a result of chemicals or spills, pool water chemicals or salt water is not covered.
Mildew of fabric is not covered. Corrosion and rusting of frames resulting from scratches are not covered. If
within the stated warranty period this product is found to be defective in material or workmanship, the
purchaser must contact the manufacturer’s customer service department. The manufacturer, at its option,
will repair or replace the defective parts. Proof of purchase (dated register receipt) is required for warranty
claims. It remains the customer’s responsibility to pay for freight and packing charges to and from the service
center. Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items
will be in the original style and color, or similar style and color if the original is unavailable or has been
discontinued.
Questions, problems, missing or damaged part? Before returning to the store call or email our Customer
Service.
Customer Service Contact Information:
Hours: Monday - Friday 8:00 a.m. - 5:00 p.m. Central Time (CT)
Phone: [phone]
Email: servic[email protected]t