Backyard Creations Sydney Point 272-1914 User manual

Made in Vietnam
Sydney Point Sectional
SKU # 272-1914
Questions or Missing Parts Please call
1-888-243-9985 between 8:30 am to 5:00 pm EST
Or email: [e-mail]

Made in Vietnam
Sydney Point Sectional (COFFEE TABLE)
SKU # 272-1914
Questions or Missing Parts Please call
1-888-243-9985 between 8:30 am to 5:00 pm EST
Or email: [e-mail]

2
Warranty
ONE YEAR LIMITED WARRANTY
WHAT IS COVERED
Sets are warranted to the original purchase to be free from defects in material or workmanship for a period of one year
efects
resulting from misuse, abuse or customer negligence will void this warranty.
You may contact our customer service department with any questions by phone at 1-888-243-9985 or email us at [email protected]
The table should be stationed on a level surface and kept away from extreme heat and strong oxidizing agents. Never
use petroleum or oil based products such as solvents or harsh cleaners to clean the material.
Care Instructions
WHAT IS NOT COVERED
Safety Information
DANGE R : Please keep children out of the assembly area
W ARN IN G : Do notstand on the table.
C A UT IO N:
during assembly.
EXCLUSIONS: Furniture used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,
spills, pool water chemical or salt water is not covered. Mildew of fabric is not covered. Glass, tile or stone breakage. Corrosion and
rusting of frames and hardware are not covered. If within the stated warranty period this product is found to be defective in material
or workmanship, the purchaser must contact the manufacturer’s customer service department. The manufacturer, at its option, will
repair or replace the defective parts. Proof of purchase (dated register receipt) is required for warranty claims. It remains the custom-
er’s responsibility to pay for freight and packing charges to and from the service center. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color, or similar style and color if the original
is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above
from state to state.
Frame: Frame is warranted against rusting for 1-year.
Finish: Frame Finish is warranted against peeling, cracking or blistering for 1-year if the product has not been scratched or
abraded.
Fabric: Cushions are covered by a 1-year warranty against manufacturing defects.
Maintain your outdoor furniture by using furniture covers or storing out of the elements when not in use.
Frame: Clean frames with a mild soap and warm water. Do not use abrasive materials, cleaners or bleach. Rinse with clean water and
dry thoroughly. Always clean, drain and dry thoroughly before storing for the winter.
Tabletop: Clean the tabletop with a soft, clean white cloth or sponge. Never use scouring creams, abrasive cleaners, acid or
petroleum-based products. Rinse with plenty of clean water before removing any soap residue. Dry thoroughly after cleaning to
prevent buildup of any residue from minerals that might be present in your water, even with softened water.
Fabric: If your set includes cushions or mesh fabric, they may be cleaned by hand with a mild solution of soap and water. Rinse cushions
thoroughly, stand on end and allow to drip dry. Do not machine wash or tumble dry, as cushions may shrink. Do not use bleach or
solvents on fabrics.
It is highly recommended that you treat the Wood twice per year with a weather proof coating, to increase the life expectancy and
maintain the look of the product. It is recommended to use a cover when the bench is not in-use. Natural color changes such as fading or
silvering on outdoor wood furniture is unavoidable and is not covered under the warranty. Store table in a dry place during winter
months.

3
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
8
Washers (M6/16x1)
Bolt (M6x20mm)
Allen Key
B
A
C
8
1
BC
A
12
Part Description Quantity
1 1
2
Table Top
2
Leg
*Note: DO NOT FULLY TIGHTEN ANY BOLTS
BEFORE THE UNIT IS PUT TOGETHER.
Pre - Assembly

4
1 Attaching the legs to table
□Attach the legs (2) to the table (1) with bolts (A), washers (b), using the Allen Key (c).
2COMPLETE!
Note: DO NOT TIGHTEN ANY BOLTS
BEFORE THE UNIT IS PUT TOGETHER.
Step:1
2
2
1
A
B
C
FULLY TIGHTEN BOLTS
Asse mbly

Made in Vietnam
Sydney Point Sectional (BENCHES)
SKU # 272-1914
Questions or Missing Parts Please call
1-888-243-9985 between 8:30 am to 5:00 pm EST
Or email: [e-mail]

2
Warranty
ONE YEAR LIMITED WARRANTY
WHAT IS COVERED
Sets are warranted to the original purchase to be free from defects in material or workmanship for a period of one year
efects
resulting from misuse, abuse or customer negligence will void this warranty.
You may contact our customer service department with any questions by phone at 1-888-243-9985 or email us at [email protected]
The benches should be stationed on a level surface and kept away from extreme heat and strong oxidizing agents. Never
use petroleum or oil based products such as solvents or harsh cleaners to clean the material.
Care Instructions
WHAT IS NOT COVERED
Safety Information
DANGE R : Please keep children out of the assembly area
W ARN IN G : Do notstand on the table.
C A UT IO N:
during assembly.
EXCLUSIONS: Furniture used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,
spills, pool water chemical or salt water is not covered. Mildew of fabric is not covered. Glass, tile or stone breakage. Corrosion and
rusting of frames and hardware are not covered. If within the stated warranty period this product is found to be defective in material
or workmanship, the purchaser must contact the manufacturer’s customer service department. The manufacturer, at its option, will
repair or replace the defective parts. Proof of purchase (dated register receipt) is required for warranty claims. It remains the custom-
er’s responsibility to pay for freight and packing charges to and from the service center. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color, or similar style and color if the original
is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above
from state to state.
Frame: Frame is warranted against rusting for 1-year.
Finish: Frame Finish is warranted against peeling, cracking or blistering for 1-year if the product has not been scratched or
abraded.
Fabric: Cushions are covered by a 1-year warranty against manufacturing defects.
Maintain your outdoor furniture by using furniture covers or storing out of the elements when not in use.
Frame: Clean frames with a mild soap and warm water. Do not use abrasive materials, cleaners or bleach. Rinse with clean water
and dry thoroughly. Always clean, drain and dry thoroughly before storing for the winter. We recommend resealing the frame once
per year.
Tabletop: Clean the tabletop with a soft, clean white cloth or sponge. Never use scouring creams, abrasive cleaners, acid or
petroleum-based products. Rinse with plenty of clean water before removing any soap residue. Dry thoroughly after cleaning to
prevent buildup of any residue from minerals that might be present in your water, even with softened water.
Fabric: If your set includes cushions or mesh fabric, they may be cleaned by hand with a mild solution of soap and water. Rinse
cushions thoroughly, stand on end and allow to drip dry. Do not machine wash or tumble dry, as cushions may shrink. Do not use
bleach or solvents on fabrics.
It is highly recommended that you treat the Wood twice per year with a weather proof coating, to increase the life expectancy and maintain
the look of the product. It is recommended to use a cover when the bench is not in-use. Natural color changes such as fading or silvering on
outdoor wood furniture is unavoidable and is not covered under the warranty. Store table in a dry place during winter months.

3
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
16
Washers (M6/16x1)
Bolt (M6x20mm)
Allen Key
B
A
C
16
1
BC
A
34
*Note: DO NOT FULLY TIGHTEN ANY BOLTS
BEFORE THE UNIT IS PUT TOGETHER.
E
D
Part Description Quantity
12
Bolt (M8x90mm)
Bolt (M8x70mm)
E
D
6
56
Pre - Assembly
L R
L R

Part Description Quantity
2
Seat Panels (L / R)
Arm rests
Back Rests (L / R)
4
3
5
2
2
Part Description Quantity
4
Back Rest Cushion
Legs
7
6
4
8 Seat Cushion 4
78
4
*Note: DO NOT FULLY TIGHTEN ANY BOLTS
BEFORE THE UNIT IS PUT TOGETHER.
Pre - Assembly CONTINUED
1 Attaching the arm rests to the seat panel
□Attach the arms (3) to the seat (4) with bolts (E), using the Allen Key (C). Repeat this step for both Left (L) and Right (R) seats.
Note: DO NOT TIGHTEN ANY BOLTS
BEFORE THE UNIT IS PUT TOGETHER.
Asse mbly
3
4R
C
E

5
2Attaching the legs to bench
□Attach the legs (6) to the seat (4) with bolts (A), washers (B), using the Allen Key (C).
Repeat this step for both Left (L) and Right (R) seats.
3Attaching the back rests
Note: DO NOT TIGHTEN ANY BOLTS
BEFORE THE UNIT IS PUT TOGETHER.
□Attach the back rest (5) to the seat (4) with bolts (D). Attach arm (1), to back rest (5) using bolt (E) using the Allen Key (c).
Repeat this step for both Left (L) and Right (R) seats.
Asse mbly
C
A
B
6
6
5R
D
D
D
E
C
E
C
D
CONTINUED