Backyard Creations Rhae FRN-313620-C Installation guide

Rhae Chair 2PK
Assembly & Care Instructions
IMPORTANT : RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
SKU #: 2722199
Model #: FRN-313620-C
ATLeisure, LLC
Toll Free: 1-855-880-7205 (English is offered)
8am - 5pm, Monday through Friday, Eastern Standard Time
Email: customerser[email protected] or visit our website at www.atleisure.com
DO NOT RETURN TO STORE
2020 Distributed by Menard, Inc., Eau Claire, WI 54703
Made in China
The schematics in this manual are for assembly and operation illustration only.
They may differ from the actual appearance.
For assistance with assembly, parts, or customer service, please contact:

2
E
Contents
Package Contents ............................2
Preparation .................................3
Hardware Contents ...........................3
Assembly..................................4-5
Warranty ...................................6
Care and Maintenance.........................6
Warnings and Cautions ........................6
Replacement Parts ...........................7
Package Contents
Part Description Quantity
DRight Arm 2
ELeft Arm 2
F Seat & Back 2
G Base 2
D E F
G

3E
Preparation
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product.
Before assembling make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product. Contact our customer service representative for
assembly assistance or questions toll free at 1-855-880-7205.
Estimated Assembly Time: 30 minutes
Tools required for Assembly: No tools required
Hardware Contents
Part Description Quantity
AA Washer ( 6) 12
BB Long Bolt (M6*30) 8
CC M6 Bolt (M6*15) 4
DD Hex Key ( 6) 1
EE M8 Bolt(M8*20) 8
FF Washer ( 8) 8
GG Hex Key ( 8) 1
AA
EE
BB
FF
CC
GG
DD
φ
φ
φ
φ

4
E
Assembly
Step 1: Place the contents on a soft, flat surface. Align the left or right arm (D
or E) to the seat and back as shown in the image above. Use the hex key (DD) to
tighten the long bolts (BB), being careful not to overtighten.
Step 2: Insert the short M6 bolts *15 (CC) through washers (AA) into the
steel sheets on corner of seat. Use the hex key (DD) to tighten the bolts, you
can tighten all the 6 bolts now.

5E
Assembly (continued)
Step 3: Attach the base on the seat and use the hex key (φ8) (GG) to tighten
the M8 bolts(EE), you can tighten all the 4 bolts now.
Step 4: Repeat the step 1 – step3 for the second chair. Double check that all
bolts are tighten before sitting. The chair is now ready for use.

6
E
Warranty
ONE YEAR WARRANTY
This product is covered under a manufacturer’s one year warranty from date of
purchase against defects in materials and workmanship. This warranty does not
cover damage due to neglect, abuse or weather related damage. For full warranty
disclosure, email us at customerser[email protected], call toll free at 1-855-880-
7205 or send mail to: 1040 Boulevard SE Ste. B, Atlanta GA 30312
NOT COVERED UNDER WARRANTY
This Warranty excludes the following: general frame rusting; glass breakage; acts of
nature (i.e. wind, fire, or freeze); damage caused by improper assembly, accident,
disaster, misuse, abuse, negligence and commercial use; discoloration or fading of
the finish or fabric as a result of exposure to the elements.
HOW TO FILE A CLAIM
If you are within your warranty you must have your receipt and pictures of your in-
formation to send to ATLeisure at customerser[email protected], or send by mail
to 1040 Boulevard SE Ste. B, Atlanta GA 30312. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.
Care and Maintenance
• Use mild soap and warm water to clean the frames.
• Rinse with clean water and dry thoroughly.
• Be sure to drain any water accumulated inside the frames. To thoroughly
drain frames, remove foot caps and tilt frames, if necessary, to remove all
water. Water allowed to accumulate inside the frames and then exposed to
sub-freezing temperatures can cause damage to frame tubing. Such damage is
not covered under warranty.
• Any rust spots should be lightly sanded and treated with rust inhibitor and
followed with an application of touch-up paint (not included).
• Hand clean chair fabric with mild solution of soap and water. Rinse thoroughly.
Do not use bleach or solvents on fabric.
Warnings and Cautions
DANGER: Keep children out of the assembly area during
assembly.
WARNING: Do not stand on chairs.
CAUTION: Use chairs on at ground only.
IMPORTANT: Check the tightness of bolts at least every 90 days.

7E
Replacement Parts
For replacement parts, call our customer service department at 1-855-880-7205,
8:00am-5:00pm., EST, Monday-Friday.
D E
G
F
Hardware Kit
Part Description Quantity Part Number
BLeft Arm 2 FRN-313620C-D
CRight Arm 2 FRN-313620C-E
D Base 2 FRN-313620C-F
E Swivel Pole 2 FRN-313620C-G
KIT Hardware Kit 1 HDW-313620C-KIT

ATLeisure, LLC
1040 Boulevard SE, Suite B
Atlanta, Georgia 30312, USA
Customer Service Toll Free 1-855-880-7205
8am - 5pm Eastern Time, Monday through Friday
www.atleisure.com
2020 Distributed by Menard, Inc., Eau Claire, WI 54703
Made in China