Backyard Creations Laurel Ridge M22104CHD User manual

Diagram 1
Diagram 2
NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND TIGHTENED
PROPERLY AND SECURELY.
**TO AVOID POTENTIAL SCRATCHING TO PARTS BY ROUGH GROUND SURFACE, COVER GROUND WITH SOFT
SMOOTH PROTECTIVE MATERIAL ON WHICH TO PLACE PARTS DURING ASSEMBLY. **
Laurel Ridge 2PK High Sling Swivel Rocker Chair
M22104CHD/2722173
Assembly Instructions
Step 4: Make sure all bolts are aligned properly and tightened securely. Then place Bolt Covers (M) and
Nut Covers(N) over Bolts and Nuts. And then attach the complete seat bucket to Base (C) as shown in
Diagram 3.
Step 1: Remove protective wrapping and lay all parts on floor. Identify all parts packed in carton against
the parts list.
Step 2: Lay Seat Bucket (A) on its front side. Attach Brace (B) to Seat Bucket (A), using Bolts(F), Washers
(H) and Bolt covers (L) as shown in Diagram 1. Then align each pair of holes on the T-bracket (D) to the two
pair of holes on the Brace of the Seat Bucket(A), place Steel Plate(E) over Brace so all holes are aligned
correctly as shown in Diagram 2.
Step 3: Attach this assembly together with Bolts (G), Steel Plates(E), Washers(I),Spring Washers(J), Nuts
(K). Put all bolts, washers, and nuts in their proper positions first before tightening securely with Hex
Wrench(O.P).
B
AL
F
H
A
J
I
K
N
E
G
M
D
Steel
Plate
Brace
T-Bracket
1 of 2

Diagram 4
Ref
Part Name Part Image Qty
Ref
Part Name Part Image Qty
A
Seat Bucket 1
C
Base 1
B
Brace 1
J
Spring
Washer
4
D
T-Bracket 1
K
Nut 4
E
Steel Plate 2
L
Bolt Cover 4
F
Bolt 4
M
Bolt Cover 4
G
Bolt 4
N
Nut Cover 4
H
Washer 4
O
Hex Wrench 2
I
Washer 4
P
Hex Wrench 1
05-2021 PRINTED IN CHINA
Diagram 3
WOODARD
Customer Service Hours
8:00am-5:00pm CST Monday to Friday
Phone: [phone] Fax: [phone]
E-mail: [email protected]
Parts List:
C
2 of 2