Badger Basket 90801 User manual

4.0/0419/TG
Shelf Storage
Cubby with
Three Baskets
MODEL NUMBERS*:
90801 - White
90811 - Pink
90821 - Espresso
90831 - Gray
NOTE: Shelf Cubbies with Three Baskets
can be stacked/used with
Two Bin models and Three Bin models
(each sold separately - refer to our web site
for additional colors/models available).
VERSION CODE*:
4.0/0419/TG
* Model and Version numbers are needed
if replacement parts are requested
Assembly and Use Instructions. Adult Assembly Required.
Read all instructions before use. This manual is part of the product
and must be saved for future reference.
Badger Basket®, PO Box 227, Edgar, WI 54426-0227 USA • Web: www.badgerbasket.com
U.S. Based Customer Service Toll-Free (Mon-Thurs 7:00 AM-4:00 PM CST): 1-800-236-1310
Phone: [phone] • Fax: [phone]
FOR REPLACEMENT PARTS:
http://www.badgerbasket.com/parts
ASSEMBLY TIPS! Review the entire manual before beginning.
Leave hardware slightly loose during assembly and then go back
and tighten fully at the end. If using a power screwdriver, keep
torque setting low and go slow to prevent damage to the product.

4.0/0419/TG
WARNING
ADULT ASSEMBLY REQUIRED
DUE TO THE PRESENCE OF SMALL PARTS AND SHARP
POINTS DURING ASSEMBLY, KEEP OUT OF REACH OF
CHILDREN UNTIL ASSEMBLY IS COMPLETE.
READ ALL INSTRUCTIONS before use of this product. Keep
instructions for future use. Use only the parts and hardware provided by Badger
Basket®. Do not use the product if it is damaged, broken, or missing parts. DO NOT
allow anyone to climb, sit on, stand on, or play on or inside of this product. It is not a seat,
step stool, or ladder. Periodically check to make sure all the hardware remains tight.
No product is a replacement for adult supervision. Multiple Cubbies/Bins can be stacked
on top of, or next to, each other to expand your storage capacity. When stacking multiple
units (sold separately), you MUST secure the units to each other (hardware included)
for stability and safety. If additional brackets and screws are needed, please contact
us. If stacking more than 42 inches (107 cm) high, we recommend that you also secure
the units to the wall (hardware not included).
WARNING - FAILURE TO FOLLOW THESE
WARNINGS AND THE INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH
BEFORE YOU BEGIN ASSEMBLY:
Check all parts. If anything is missing or not
satisfactory, please DO NOT call the store
or return the product to them. Please go online to:
http://www.badgerbasket.com/parts
Most problems are resolved
without you needing to leave home.
When emailing or calling us, please have this
instruction manual, your product model number,
and your Version Code ready.
Your Model Number is: SEE COVER PAGE
Your Version Code is: 4.0/0419/TG
USE AND CARE INSTRUCTIONS:
Wipe storage unit clean with a damp cloth and mild soap as needed. Dry thoroughly.
Spot clean baskets as needed. Do not immerse baskets in water. Do not use acidic cleaners
(such as vinegar). Some soft plastic/rubber toys (such as balls) can react with
what is stored in the unit and regularly check toys and the unit to prevent damage.

NOTE: MAKE SURE THAT THE GROOVES ON
PARTS (A), (B), AND (C) LINE UP BEFORE YOU
TIGHTEN THE SCREWS. THE GROOVES MUST LINE
UP SO THAT THE BACK (F) WILL FIT IN STEP 3 AND THE
TOP (G) WILL ATTACH PROPERLY IN STEP 4.

NOTE: THE BACK (F) MUST BE SEATED INTO THE GROOVE
ON THE THE BOTTOM (A) OR THE TOP (G) WILL NOT
FIT PROPERLY. LOOSEN AND RETIGHTEN THE PANELS
IF NEEDED SO THAT THE BACK (F) IS
FITTED INTO ALL GROOVES PROPERLY AND
THE TOP (G) FITS CORRECTLY.

(6)