BALDR B0341WST2H2-V3 User manual

MODEL:B0341WST2H2-V3
WIRELESS WEATHER STATION WITH BACKLIGHT
QUICK SETUP GUIDE
1

2
POWER ON
1.Main Unit Installation
2.Sensor Installation
Switch to CH1
Switch to CH2
Switch to CH3
Step 1, Select the channel
you desired to use.
Step 1, Remove the battery compartment
cover and insert 2xAAA batteries.
Step 2, Load the 2xAA batteries
in 3 minutes to ensure
RF signal received in time.
Battery
compartment

Press and hold “CH/▲” button for 3
seconds to search RF signal again.
3
1.After Power On
LCD will full display for 3
seconds with “BI” sound.
NOTE:
MAIN UNIT SETUP
After 3 seconds, the LCD will
display as below
If not powered on in 3 minutes
from the main unit powered on
2. Date and weekday
3. Weather
forecast
4. Outdoor temperature
and humidity
5. Indoor temperature
and humidity
1. Current time

4
Outdoor Data will
display automatically.
The receiving antenna
signal will stop flashing.
2.RF Signal Searching 3.RF Signal Received
The receiving antenna
signal is flashing.
Press “CH/▲”button to select the
channel on main unit you
desire to use (Default in CH1)
Select the same channel number
for both the sensor and the
main unit in order to synchronize.
Switch to CH1
Switch to CH2
Switch to CH3

5
4.Manual Setup SETUP ORDER
● Press and hold “SET/C/F” button
to enter into setup (3 seconds).
● Press and release “SET/C/F”
button to skip setting or go to next
setting option (1 second).
*Tips: press and hold “CH/▲” or “MEM/ ” button will quickly change
the value by 8 steps.
12/24
hours select
1
Year
4
Date
7
DM/MD
select
5
Month
6
Weekday
language
8
Key tone
ON/OFF
9
Hour
2
Minute
3
Press “CH/▲” button to
increase the values.
Press “MEM/ ” button to
decrease the values.

6
This Qucik Start is to help you quickly set up the product. For detailed
settings, please refer to the user manual, or scan the QR code below
for relevant product information and operation video link.Thank you.
www.baldr.com
[e-mail]