BALDR B0340WST2H2R-V8 User manual

USER MANUAL MODEL:B0340WST2H2R-V8
(UK VERSION)
TOUCH SCREEN WIRELESS WEATHER
STATION WITH OUTDOOR TEMPERATURE
ALERTS
For the start-up of this device:
Main unit by 3 x AAA Batteries (not included)
Sensor by 2 x AA batteries (not included)
We thank you for your purchase of Baldr Touch Screen Wireless
Weather Station with Outdoor Temperature Alerts. It has been
designed and constructed using innovative components and tech-
niques to enable the perfect display. Please read the instructions
carefully to become familiar with the properties and functions
before you use the unit.

PRODUCT OVERVIEW
MAIN UNIT
2
ALERT
1
2
3
23
4 5
6
7
24
8
9
1011121413
151617
18
21
20
19
22

1. Weather forecast
2. Top backlight button
3. Current time
Weather forecast for next 12-24 hours
12/24 hour format selectable
4. RCC indicator
5. Calendar display
3
indicates the direction humidity/temperature is trending
Check or clear Max/min record ,decrease the data
18. Outdoor temperature
19. Frosting point icon
20. Outdoor temperature alert
6. Window indicator
7. Comfort level indicator
8. Max/min records of temperature and humidity
9. Arrow icon
10. Indoor humidity
11. Indoor temperature
12. Low battery indication
13. Outdoor humidity
14. “MEM/▼” touch button
Enter into time setting or RCC function
15. “RCC/SET” touch button
Switch channel from CH1--CH2--CH3--Channel scan
21. Outdoor sensor channel
22. Battery compartment cover
23. Hanging hole
24. Removable stand bracket
Clear sensors data and re-registration or increase the data
Outdoor high/low temperature alert with the symbol /
16. “CH/▲” touch button
Short press to check the temperature alert value
Long press to enter intotemperature alert value setting
17. “ALERT” touch button

4
1. Signal light 2. Hanging hole
3. Battery compartment 4. Channel 1-2-3 switch
OUTDOOR SENSOR
12
3
4
FEATURES
● MSF radio controlled time
● Up to 3 RF channels for outdoor sensors (only one sensor included)
● Calendar, alarm and snooze function
●
Time display in 12/24H
●
Temperature tendency display in arrows
●
Weather forecast for next 12-24 hours
●
Measures indoor/outdoor humidity and temperature (℃/℉)
●
Max/min record of indoor /outdoor temperature & humidity
●
Outdoor temperature alert
●
Frosting point icon
● Indoor temperature range: -10℃~50℃(14 ℉~122℉)
● Outdoor temperature range:-40℃~60℃(-40℉~140℉)
●
In/outdoor humidity range: 1%-99%

5
●
Up to 3 RF channels for outdoor sensors (only one sensor included)
●
White backlight lasts for 20 seconds
●
Stable and storable mental stand
PACKAGE CONTENT
Following contents are included in the package:
1 x Weather Station Main Unit
1 x Remote Sensor
1 x User Manual
1. Remove the battery compartment cover;
2. Insert 3 x AAA battery matching the polarity(+and-) ;
3. Take the metal stand out of the compartment and install it on the
back of the unit.
GETTING START
MAIN UNIT INSTALLATION
SENSOR INSTALLATION
1. Remove the battery compartment cover;
2. Insert 2 x AA batteries in each sensor matching the polarity (+and-);
3. Replace the battery cover.
SENSOR SETUP
BALDR recommends high quality alkaline or lithium batteries for
the best product performance. Heavy duty or rechargeable
batteries are not recommended.
Switch the Channel 1-2-3 of the senor to any channel you want.
For example, you can set to Channel 1 for the sensor. But please
ensure the main unit are set to the same channel before synchro-
nization. Special note: Press “ CH/▲” button on the main unit to
set the channel. The setting order is CH1--CH2--CH3-- Channel
scan(from CH1 to CH2 to CH3, 10 seconds intervals),you must
select the same number choices for both the sensor and the
main unit in order to synchronize.
●
Power the main unit prior to load the battery of sensor.

6
2. Insert 2 x AA batteries in each sensor matching the polarity (+and-);
Note:
MAIN UNIT SETUP
Main unit will auto receive outdoor signal after power on, the
receiving status will last for max 3 minutes. The receiving anten-
na signal will flash. If no signal received in 3 minutes, it will stop
receiving outdoor signal.
When power on or reset, LCD will full display for 3 seconds with
“BI” sound. Then display Indoor temperature and humidity with
100% backlight brightness.
1.
RF Signal Receiving
After power on, It will start receiving outdoor sensors’ signal for 3
minutes. If all 3 channels signal received within 3 minutes or receiv-
ing window ends, it will enter into MSF Signal Receiving window.
If the main unit is out of 3 minutes’ signal receiving window, you
need to press and hold the “ CH/▲” button to enter signal
receiving again.
2.
MSF Signal Receiving
After RF signal receiving, it will start searching radio signal for 7
minutes with the antenna symbol “ ” flashing on screen.
1.
Once signal received, the main unit will display the received
time/month/date/weekday with symbol “ ” displaying on
screen.
2.
Daily RCC signal receiving: there are regular radio signal receiv-
ing at 1:00AM,2:00AM, 3:00AM,4:00AM, 5:00AM each day. It
starts receiving signal at 1:00AM everyday. For each day, once
signal received at any one receiving time, it will stop receiving
signal that day.
3.
Manual receiving: press “ RCC/ SET ” button to enter RCC
signal receiving.
4.
During receiving,you can press “ RCC/ SET ” button to exit RCC
receiving.
5.

7
Manual Settings
After signal received, if there is no need for other settings, you
can just finish reading here. If there is other setting requirements.
Please check the following steps. Or if there is no signal
received, you can follow bellow steps for Manual Setting.
1.
Press and hold “ RCC/SET ” button to enter into setting, press
“ RCC/SET ” button to skip setting steps or go to the next
setting option.
*Tips: press and hold “ CH/▲” or “ MEM/▼” button will
quickly change the value by 8 steps.
2.
Press “ RCC/SET ” to select 12/24H Time Format. Default
setting :12 H. Press the “ CH/▲” or “ MEM/▼” button to select
12H or 24H.
3.
Press “ RCC/SET ” to select Minutes. Press “ CH/▲” or “MEM/▼”
button to adjust the value.
Press “ RCC/SET ” to select Hours. Press “ CH/▲” or “ MEM/▼”
button to adjust the value.
4.
5.
Press “ RCC/SET ” to select Year. Setting range: 2000-2099.Press
“ CH/▲” or “ MEM/▼” button to adjust the value.
6.
Press “ RCC/SET ” to select Month & Date display format.
Default setting : D/M. Press the “ CH/▲” or “ MEM/▼” button to
select M/D or D/M format. (M: Month ,D: Date)
7.
Press “ RCC/SET ” to select the Month. Press “ CH/▲” or “ MEM
/▼” button to adjust the value.
8.
Press “ RCC/SET ” to select the Date. Press “CH/▲” or“MEM/▼”
button to adjust the value.
9.
Press “ RCC/SET ” to select Temperature Unit.Default
setting : ℃.Press the “ CH/▲” or “ MEM/▼” button to
select
℃/℉.
10.
* RCC symbol display:
a. When receiving signal , RCC symbol “ ” will be flashing
by “1HZ”.
b. When signal successfully received, LCD will display complete
RCC symbol “ ” and exit RCC receiving.
c. If no signal is received, the RCC symbol will disappear.

OUTDOOR TEMPERATURE ALERT
8
SET OUTDOOR TEMPERATURE ALERT
TURN ON/OFF TEMPERATURE ALERT
Press and hold “ALERT” button to enter into outdoor tempera-
ture alert value ; the setting data will be flashing in 1Hz.
1.
The setting order is: High temperature alert value→Low tem-
perature alert value→Exit.
2.
Press “ CH/▲” or “ MEM/▼” button to adjust data; press and
hold “ CH/▲” or “ MEM/▼” button will quickly change the data
by 8 steps.
3.
If no operation for 20 seconds, it will automatically save and exit
setting.
4.
The temperature alert function will be ON after setting the alert
values.
1.
Press “ALERT” button to check the high temperature alert value.2.
Press “ CH/▲” or “ MEM/▼” button to turn on/off the high
temperature alert function with on/off of the symbol “ ”.
3.
Press “ALERT” button again to check the low temperature alert
value.
4.
Press “ CH/▲” or “ MEM/▼” button to turn on/off the low
temperature alert function with on/off of the symbol “ ”.
5.
Default setting : High temperature alert value 60℃;
Low temperature alert value -40℃.
6.
When the outdoor temperature is higher or lower than the upper
and lower temperature alarm setting value,the corresponding
temperature alert symbol" " will keep flashing with "BiBiBiBi"
sound every 1 minute.
7.
Press “ RCC/SET ” to confirm and exit.11.
During setting, touch top button to save and exit setting.12.
During setting, if no operation for 20 seconds, it will automatical-
ly save and exit setting.
13.
/

OPERATION GUIDELINES
9
MAX AND MIN RECORD
WINDOW OPEN/CLOSE INDICATION
Press “ MEM/▼” button to check outdoor and indoor max/min
temperature and humidity.
1.
FROST-POINT ALERT
When outdoor temperature reading is between 0℃~2.9℃,the
icon will be flashing to indicate the frosting point.
1.
When outdoor temperature reading is lower than 0℃, the icon
will always display.
2.
Humidity comfort
level
Comfort
Ambient change
More dry,more
wet or no change
OFF OFF
Dry No change OFF OFF
Dry More wet ON
ON
OFF
Dry More dry OFF ON
ON
Wet
Wet
Wet
No change
More wet
More dry
OFF
OFF
OFF
OFF
Open window Close window
!
!

10
TEMPERATURE
After power on ,the indoor temperature will display automatically,
it will update reading each 30 seconds and start to receive
outdoor signal which lasts for max 3 minutes.
1.
Accuracy: For temperature between 0℃~50℃,the accuracy is
±1 ℃,if out of this range the accuracy will be ±2℃; Temperature
resolution is 0.1 ℃(0.1℉).
5.
Press “ RCC/SET ” button to select the temperature unit ℃/℉
(Refer to Manual Settings point 10).
6.
HUMIDITY
After power on ,the indoor humidity will display automatically, it
will update reading each 30 seconds and start to receive out-
door signal which lasts for max 3 minutes.
1.
Humidity display range: 1%-99%;for humidity lower than 1%,the
reading will be “1%”;for humidity higher than 99%,the reading
will be “99%”.
2.
Indoor temperature display range:-10℃~ 50.0℃(14℉~ 122℉);
for temperature lower than -10℃,the reading will be :“LL.L”; for
temperature higher than +50℃,the reading will be :“HH.H”.
2.
Outdoor temperature display range :-40℃~60℃(-40℉~140℉);
for temperature lower than -40℃,the reading will be :“LL.L”; for
temperature higher than +60℃,the reading will be :“HH.H”.
3.
Arrow indication for temperature changes:
will display when the reading increase by 1℃within one hour
or compared with last reading.
will display when the reading decrease by 1℃within one
hour or compared with last reading.
4.
The checking order is : Max Record→Min Record→Exit. The
value will display for 3 seconds.
2.
Press and hold the “ MEM/▼” button to clear the max and min
record.
3.
Normally, the Max and Min record will update every 24 hours at
0:00.
4.
If no operation for 3 seconds, it will automatically exit .5.

11
●
The weather forecast icon will show after power on. There are 5
kinds of weather modes: Sunny, Sunny To Cloudy, Cloudy,
Rainy, Snow. The weather icon displays are based on the hourly
calculation of indoor/outdoor temperature & humidity and barom-
eter data. The forecast is for next 12 hours with 70%-75% accu-
racy after 48 hours of data accumulation .
WEATHER FORECAST
●
About Main Unit: When battery indicator shows next to Indoor
Temperature, replace main unit battery.
●
When powered by batteries, press top button to turn on the
backlight. The backlight will last 20 seconds.
BACKLIGHT FUNCTION
●
About Outdoor Sensor: When battery indicator shows next to the
outdoor temperature, replace batteries in your outdoor sensor.
LOW BATTERY INDICATORS
Accuracy: when the humidity is between 30-80%,the accuracy is
± 5%,if out of this range the accuracy will be ±7%.
3.
Humidity resolution:1% .
Tips: The reading will be more accurate if it is placed at the same
position for half an hour after power on.
5.
Arrow indication for humidity changes:
will display when the reading increase by 3% RH within one
hour or compared with last reading.
will display when the reading decrease by 3% RH within one
hour or compared with last reading.
4.
Sunny Sunny To
Cloudy
Cloudy Rainy Snow

12
TROUBLE SHOOTING
Problem
Outdoor reading is
flashing or showing
dashes
Possible Solution
Bring the sensor and main unit indoors,
side by side and remove batteries from
each.
1.
Flashing of the outdoor reading is generally
an indication of wireless interference.
Make sure the CH 1-2-3 switch on both
units match.
2.
Reload batteries in outdoor sensor.3.
Reload batteries in main unit.4.
Let both units sit within a couple feet of
each other for a few minutes to gain a
strong connection before taking sensor
to outdoor area.
5.
No outdoor
sensor reception
eload the batteries of both outdoor
sensor and main unit. Please refer to the
SENSOR SETUP section.
1.
Relocate the main unit and/or the out-
door sensor. The units must be within
100m(328ft) of each other.
2.
Make sure both units are placed at least
0.9 m (3 ft) away from electronics that
may interfere with the wireless communi-
cation (such as TVs, microwaves, com-
puters, etc).
3.
Use standard alkaline batteries. Do not
use heavy duty or rechargeable batteries.
NOTE: It may take a few minutes for
main unit and sensor to synchronize after
batteries are reloaded.
4.

13
PLACEMENT INSTRUCTION
BALDR sensors are sensitive to surrounding environmental condi-
tions. Proper placement of both the main unit and outdoor sensor
are critical to the accuracy and performance of this product.
Place main unit in a dry area free of dirt and dust. To help ensure
an accurate indoor temperature measurement, be sure to place the
Main unit away from heat sources or vents.
BACKLIGHT FUNCTION
Sensor must be placed outside to observe outdoor conditions.
Sensor is water resistant for water splashes and is designed for
general outdoor use, however, to extend its life place the sensor in
an area protected from direct weather elements. The best location
is 1.2 to 2.4 meters (4 to 8 feet) above the ground with permanent
shade and plenty of fresh air to circulate around the sensor.
Outdoor Sensor Placement
Problem Possible Solution
Inaccurate
temperature/
humidity
“HH.H/LL.L” display
in indoor and/or
outdoor temperature
Make sure both the main unit and sensor
are placed out of direct sunlight and away
from any heat sources or vents.
If the temperature is higher than the detec-
tion range, “HH.H” will display on screen for
indication; if lower than the detection range,
“LL.L” will display on screen for indication.
If your BALDR product does not operate properly after trying the
troubleshooting steps, please contact the seller on your order
page or shoot an email to: [email protected].

14
●
The distance between main unit and transmitter should be at
least 1.5~2 meters (5~6.5 feet) away from any interfering sources
such as computer monitors or TV sets.
Important Placement Guidelines
●
To maximize wireless range, place units away from large metallic
items, thick walls, metal surfaces, or other objects that may limit
wireless communication.
●
Please do not use other electrical products such as headphones
or speakers operating on the same signal frequency.
PRECAUTIONS
●
Do not clean any part of the product with benzene, thinner or
other solvent chemicals. When necessary, clean it with a soft
cloth.
●
Never immerse the product in water. This can cause electrical
shock and damage the product.
●
Do not subject the product to extreme force, shock, or fluctua-
tions in temperature or humidity.
●
Do not tamper With the internal components.
●
Do not mix new and old batteries or batteries of different types.
●
Do not mix alkaline, standard or rechargeable batteries with this
product.Remove the batteries if storing this product for a long
period of time.
●
Do not dispose of this product as unsorted municipal waste.
Collection of such waste separately for special treatment is
necessary.
●
Neighbors using electrical devices operating on the same signal
frequency can also cause interference.

15
www.baldr.com
[e-mail]
BALDR provides a 1-year limited warranty on this product against
manufacturing defects in materials and workmanship.
Warranty service can only be performed by our authorized service
center. The original dated bill of sale must be presented upon
request as proof of purchase to us, or our authorized service
center.
The warranty covers all defects in material and workmanship with
the following specified exceptions:(1) damage caused by accident,
unreasonable use or neglect (including the lack or reasonable and
necessary maintenance); (2) damage occurring during shipment
(claims must be presented to the carrier); (3) damage to, or deteri-
oration of any accessory or decorative surface;(4) damage result-
ing from failure to follow instructions contained in your owner’ s
manual.
This warranty covers only actual defects within the product itself,
and does not cover the cost of installation or removal from a fixed
installation, normal set-up or adjustments, claims based on mis-
representation by the seller or performance variations resulting
from installation-related circumstances.
To receive warranty service, the purchaser must contact with
BALDR nominated service center for the problem determination
and service procedure.
Thank you for your choice of BALDR products!
WARRANTY