BALDR B0359WST4H4PR User manual

MODEL:B0359WST4H4PR
WIRELESS COLOR WEATHER STATION
WITH 3 REMOTE SENSORS
QUICK SETUP GUIDE
1
inHg
mmHg
hPa mb

2
POWER ON
1.Main Unit Installation
2.Sensor Installation
AC Hole
Step1, Peel off the protecting
mask of main unit.
Step 3, Remove the the insulation strip
Switch to CH1
Switch to CH2
Switch to CH3
Step 1, Switch the
channels in order
Step 2,Plug the AC Adaptor
to a powered outlet.
Step 2, Load the 2xAA batteries
to each sensor in 3 minutes
to ensure RF signal received in time.

inHg
mmHg
hPa mb
3
1.After Power On
LCD will full display for 3
seconds with “BI” sound.
NOTE:
SET
CH
MEM
RCC
/
MAIN UNIT SETUP
After 3 seconds, the LCD will
display the datas as below
If Not Powered on
in 3 minutes
Press and hold “CH” button for 3
seconds to search RF signal again.
2. Time&Date&Month&Weekday
( Calibration after RCC signal
received or manual setup)
4. Indoor temperature and humidity
hPa mb
1. Weather Forecast Icon
3. Barometer （flash for 10 seconds）

4
4.RCC Radio Signal Receiving
RCC Radio Signal Searching for 7 Minutes
The antenna symbol is flashing.
The backlight brightness will go dim to 3%.
Automatically display
2.RF Signal Searching 3.RF Signal Received
The receiving antenna
signal will flash
hPa mb
hPa mb
Datas from 3
sensors
hPa mb
Antenna Signal

5
No RCC Radio Signal Received
Manual setup SETUP ORDER
The antenna symbol
will disappear
Press and hold “▲/RCC ”
button for 3 seconds
to search RCC radio signal again
Press and hold “SET” button to
enter into setup (3 seconds).
Press and release “SET”
button to skip setting
or go to next setting
option(1 second).
hPa mb
SET
CH
MEM
RCC
/
SET
CH
MEM
RCC
/
Weekday
Language
1
Year
4
Date
7
Barometer
Unit
8
RCC
ON/OFF
9
Time
Zone
10
DST ON/OFF
(ONLY FOR
US VERSION)
11
Weather
12
Month&Date
display format
5
Month
6
Hours
2
Minutes
3

6
Press “▲/RCC ” button to
increase the values.
SET
CH
MEM
RCC
/
Press “▼”button to
decrease the values.
This is a guideline to help you quick set up the product, if you need for
other detailed settings and information, please follow the user
instruction, you can scan the following QR code to get relevant product
information and operation video link. Thank you.
*Tips: press and hold “▲/RCC” or “ ▼ ” button will quickly change the
value by 8 steps.
SET
CH
MEM
RCC
/
www.baldr.com
[e-mail]