BALDR B0360WST2H2PR-V2 User manual

MODEL:B0360WST2H2PR-V2
COLOR RADIO- CONTROLLED
WEATHER STATION
QUICK SETUP GUIDE
1

2
POWER ON
1.Main Unit Installation
2.Sensor Installation
Step 1, Peel off the protecting mask of main unit.
Powered by AC Adaptor
Switch to CH1
Switch to CH2
Switch to CH3
Step 1, Select the channel on
sensor you desired to use
Step 2,Plug the AC Adaptor to a powered outlet or insert 3xAAA
batteries matching the polarity(+/-)Step 2, Load the 2xAA batteries
in 3 minutes to ensure
RF signal received in time.
Powered by Batteries
or
AC Hole
Battery
compartment

Press and hold“▲/CH” button for 3
seconds to search RF signal again.
3
1.After Power On
LCD will full display for 3
seconds with “BI” sound.
NOTE:
MAIN UNIT SETUP
After 3 seconds, the LCD will
display the datas as below
If not powered on within 3 minutes
from the main unit powered on
Moon phase

The antenna symbol is flashing.
The screen will go dark for 7
minutes. No buttons except
“ ” button will function during
the period.
4
4.RCC Atomic Radio Signal Receiving Mode
Automatically starts after powering up
Press “ ” button will allow
exiting the Atomic mode to
continue manual setup.
Outdoor
datas
Automatically display,
and the antenna signal
will stop flash.
2.RF Signal Searching 3.RF Signal Received
The receiving antenna
signal is flashing.
Antenna Signal

5
No RCC Radio Signal Received
Manual setup SETUP ORDER
The antenna symbol will disappear
Press “ ” button to search
RCC signal radio signal again.
● Press and hold “ ” button to
enter into setup (3 seconds).
● Press and release “ ” button
to skip setting or go to next
setting option(1 second).
Key Tone
ON/OFF
1
Time
Zone
4
Date
7
12/24 Hour
Display Mode
8
Hours
9
Minutes
10
Temperature
Unit(℃/℉)
11
Weather
12
Year
5
Month
6
Weekday
Language
2
RCC
ON/OFF
3

6
Press “▲/RCC ” button to
increase the values.
Press “▼/MEM”button to
decrease the values.
This Qucik Start is to help you quickly set up the product. For detailed
settings, please refer to the user manual, or scan the QR code below
for relevant product information and operation video link.Thank you.
*Tips: press and hold “▲/RCC” or “▼/MEM” button will quickly change
the value.
www.baldr.com
[e-mail]