BALDR B0359WST2H2PR-V2 User manual

DRY GOOD HUMID DRY GOOD HUMID
USER MANUAL MODEL: B0359WST2H2PR-V2
(US VERSION)
DIGITAL COLOR WEATHER STATION WITH
BAROMETRIC PRESSURE
Thank you for purchasing BALDR digital color weather station.
To ensure a better user experience, please read the user manual
carefully. Any questions about our product, please feel free to
contact us via:
Email:
[e-mail]
USA Tel.:
1-833-381-5659
(Please Keep the Manual for Maintenance)

1
CONTENTS
1. PRODUCT OVERVIEW
2. QUICK SET-UP GUIDE
3. ALARM AND SNOOZE FUNCTION
4. TEMPERATURE & HUMIDITY MAX AND MIN RECORDS
5. ARROW TRENDS INDICATION
6. TEMPERATURE ALERTS
7. WEATHER FORECAST
8. BAROMETRIC PRESSURE HISTORY
9. COMFORT LEVEL INDICATOR
10. MOON PHASE
11. FROST-POINT ALERT
12. ADJUSTABLE BACKLIGHT
13. LOW BATTERY INDICATOR
14. OUTDOOR SENSOR INSTALLATION
15. TROUBLE SHOOTING
16. FACTORY SETTINGS
17. SPECIFICATIONS
18. PRECAUTIONS
19. WARRANTY
20. FCC STATEMENT
1.1 Weather Station (Main Unit)
1.2 Outdoor Sensor
1.3 Button Introduction
1.4 Package Includes
17.1 Technical Specifications
17.2 Measurement Specifications
6.1 Check and Turn ON/OFF Alerts
6.2 Temperature Alerts Setting
3.1 Alarm Time Setting
3.2 Alarm ON/OFF Setting
3.3 Snooze Function
2.1 Power Up
2.2 WWVB Signal Receiving
2.3 Manual Setting
14
14
15
15
15
16
16
16
18
19
20
2
4
5
6
20
20
12
13
11
11
11
6
7
8
2
6
12
12
12
21
22
23
11

DRY GOOD HUMID DRY GOOD HUMID
2
1. PRODUCT OVERVIEW
1.1 Weather Station (Main Unit)
1. Outdoor temperature and humidity
2. Max/Min records of outdoor temperature and humidity
3. Indoor temperature and humidity
4. Arrow trends
5. Max/Min records of indoor temperature and humidity
6. Five comfort level indication of indoor and outdoor
7. Weather forecast
Weather forecast for the next 12-24 hours
8. Barometric pressure
Barometer display in mmHg, inHg or hPa/mb

3
9. Barometric history for the past 12 hours
10. Calendar display
Weekdays in 7 languages
11. Current time
12/24 hour format optional
12. Frost-point warning
13. High/Low temperature alerts
14. Low battery indication
15. Moon phase
16.“ ” button
17.“ SET ” button
Enter manual setting
18.“ ” button
Check alarm time, turn on/off alarm, enter into alarm setting
19.“ ▲/CH ” button
Clear sensors data and re-registration or increase the data
20.“ ▼/RCC ” button
RCC function or decrease the data
21.“ ALERTS ” button
Check or enter into temperature alerts setting
22.“ MEM ” button
Check or clear Max/Min records
23. Stand bracket
24. Hanging hole
25. Battery compartment
1. The default year is 2020, if the weekday display is incorrect,
Please confirm the year was set correctly. (for manual setting only)
2. The CR2032 cell battery for memory function (included), please
do not use it as a power supply. If you need to replace the cell
battery, please take out the part device as shown in the figure
below, load a new battery matching the polarity（+and-).
Notes:

4
WARNING: THIS PRODUCT CONTAINS A BUTTON-CELL BATTERY.
IF SWALLOWED, IT COULD CAUSE SEVERE INJURY OR DEATH IN
JUST 2 HOURS. SEEK MEDICAL ATTENTION IMMEDIATELY IF
INGESTED.
1.2 Outdoor Sensor
1.Signal light 2. Hanging hole
3. Battery compartment 4. Channel 1-2-3 switch
Pick out
Positive
pole

5
1.3 Button Introduction
Normal Mode:
PRESS AND HOLD for 3 seconds to enter Manual Setting.
Normal Mode:
PRESS to check alarm time, turn ON/OFF alarm.
PRESS AND HOLD for 3 seconds to enter into alarm setting.
Normal Mode:
PRESS to switch channel from CH1, CH2, CH3,
or Circular Channels Mode “ ”.
PRESS AND HOLD for 3 seconds to reconnect sensor.
Manual Setting or Alarm Setting:
PRESS to increase the value by 1.
PRESS AND HOLD for 3 seconds to increase the value
continuously.
Normal Mode:
PRESS AND HOLD for 3 seconds to search WWVB radio
signal.
During searching, PRESS to stop.
Manual Setting or Alarm Setting:
PRESS to decrease the value by 1.
PRESS AND HOLD for 3 seconds to decrease the value
continuously.
Normal Mode:
PRESS to check temperature alert.
PRESS
AND HOLD for 3 seconds to enter temperature
alert
setting.
Normal Mode:
PRESS to check MAX/MIN indoor/outdoor temperature
and humidity.
Record Display Mode:
PRESS AND HOLD for 3 seconds to clear the MAX/MIN
records.
Normal Mode:
BACKLIGHT: Press to adjust the backlight brightness.
When alarm rings, press to enter into snooze mode.
Manual Setting or Alarm Setting:
PRESS to save and exit.
BUTTONS FUNCTIONS
SET
ALERTS
MEM

6
1.4 Package Includes
Following contents are included in the package:
1 x Weather Station Main Unit
1 x Outdoor Sensor (not included 2 x AA batteries)
1 x AC Adapter
1 x CR2032 Cell Battery
1 x User Manual
2.1 Power Up
1.Remove the CR2032 battery of main unit, plug the adapter
into a powered outlet.
2.Remove the sensor’s battery compartment cover, set the
channel of CH1/CH2/CH3 , press “▲/ CH ” button on the main
unit to set the channel same as the sensor’s, and then insert
2 x AA batteries into sensor matching the polarity(+and-)
within 3 minutes.
3.Replace the battery cover and place the sensor vertically on
the table.
4.Reinsert the CR2032 battery into main unit after received
sensor data.
5.
Put the main unit and outdoor sensor together for 30 minutes
to establish a strong connection.
6.After power on, the main unit will start receiving outdoor
sensors’ signal (RF signal) for 3 minutes, the receiving antenna
signal will appear and flash on the main unit screen.
After sensor signal is received within 3 minutes or receiving
window ends, it will enter into WWVB Signal Receiving window.
2. QUICK SET-UP GUIDE
Please use high quality alkaline or lithium batteries for the best
product performance. Do not mix old and new batteries. Heavy
duty or rechargeable batteries are not recommended.
Note:

7
2.2 WWVB Signal Receiving
1. After RF signal receiving, it will start searching radio signal for
7 minutes with the antenna symbol“ ”flashing on screen.
2. Once signal received, the main unit will display the received
time/month/date/weekday with symbol“ ”displaying on
screen.
3. Daily RCC signal receiving: there are regular radio signal
receiving at UTC 7:00,8:00,9:00,10:00,11:00 each day. It starts
receiving signal at UTC 7:00 everyday. For each day, once signal
received at any one receiving time, it will stop receiving signal
that day.
4.
Manual receiving: press and hold“ ▼/RCC ” button to enter
RCC signal receiving.
5.
During receiving, no response if press other buttons, you can
press“ ▼/RCC ” button to exit RCC receiving.
(1) Make sure the RCC function is ON or you can set it by
2.3 Manual Settings → Settings Menu Orders → refers to point 2.
1.Make sure the main unit and sensor are in the same channel for
synchronizing data.
2.The main unit channel setting order is CH1--CH2--CH3--Circular
Channels Mode “ ”
(from CH1 to CH2 to CH3, 5 seconds intervals).
3.If the signal receiving time exceeds 3 minutes, you need to press
and hold the “▲/ CH ” button to reconnect sensor.
Notes:
*RCC symbol display:
a. When receiving signal , RCC symbol“ ”will be flashing by“1HZ”.
b. When signal successfully received, LCD will display complete RCC
symbol “ ” and exit RCC receiving.
c. If no signal is received, the RCC symbol will disappear.
Notes:

8
(2) Make sure the time zone is correct (Default time zone is 0)
or you can set the time zone by
2.3 Manual Settings → Settings Menu Orders → refers to point 4.
(3) When receiving RCC signal, please keep the weather station
close to the window or receive RCC signal outdoors to enhance
the signal reception.
After signal received, if there is no need for other settings, you
can just finish reading here. If there are other setting requirements,
please check the following steps. Or if there is no signal received,
you can follow the below steps for manual setting.
Notes:
Weekday Language→RCC ON/OFF→DST ON/OFF→Time Zone
→12/24H Time Format→Hours→Minutes→Year→Month&Date
Display Format→Month→Date→Temperature Unit→Barometric
Unit→Beep ON/OFF→Weather→Exit.
Settings Menu Orders:
2.3 Manual Setting
1.Press and hold“ SET ”button to enter into setting.
2.Press“▲/CH” or “▼/RCC”button to to adjust the values, hold
the button will adjust quickly.
3.Press“ SET ”button to confirm and go to the next setting option.
4.Press the“ ”button at anytime to save and exit settings.
5.During setting, if no operation for 20 seconds, it will automatically
save and exit setting.
TIPS:
1. Press “ SET ” button to select Weekday Language. Default
setting: EN. Press the “▲/CH” or “ ▼/RCC ” button to select
languages: EN, GE, IT, FR, DU, SP, DA.
(English/German/Italian/French/Dutch/Spanish/Danish)

9
2. Press “ SET ” button to turn ON/OFF RCC function.
Default setting: ON. Press “▲/CH” or “ ▼/RCC ”
button to select OFF or ON.
3. Press “ SET ” button to select DST ON/OFF. Default setting:
ON. Press “▲/CH” or “ ▼/RCC ” button to select DST ON if you
do observe Daylight Saving Time.
4. Press “ SET ” button to select Time Zone. Default setting: -5
(EST). Press “▲/CH” or “ ▼/RCC ” button to select time zone :
AST(-4) ,EST(-5), CST(-6), MST(-7), PST(-8), AKT(-9), HAT(-10)
optional.
Language
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
DST symbol display:
a.Select “DST ALWAYS”, means DST function is always on all the
year round.
b.Select “DST”, means DST function will be on during daylight
saving time.
c.Select “DST OFF”, means DST function is OFF.
Time
Zone
AST EST CST MST PST AKT HAT
Atlantic Eastern Central Mountain
Pacific Alaskan Hawaiian

10
5. Press “ SET ” button to select 12/24H Time Format. Default
setting: 12 H. Press the “▲/CH” or “ ▼/RCC ” button to
select 12H or 24H.
6. Press “ SET ” button to select Hours. Press “▲/CH” or
“ ▼/RCC ” button to adjust the value.
7. Press “ SET ” button to select Minutes. Press “▲/CH” or
“ ▼/RCC ” button to adjust the value.
8. Press “ SET ” button to select Year. Press “▲/CH” or
“ ▼/RCC ” button to adjust the value.
9. Press “ SET ” button to select Month&Date display format.
Default setting: D/M. Press the “▲/CH” or “ ▼/RCC ” button
to select M/D or D/M format. (M: Month, D: Date)
10. Press “ SET ” button to select the Month. Press “▲/CH” or
“ ▼/RCC ” button to adjust the value.
11. Press “ SET ” button to select the Date. Press “▲/CH” or
“ ▼/RCC ” button to adjust the value.
12. Press “ SET ” button to select Temperature Unit. Default
setting: ℉ .Press the “▲/CH” or “ ▼/RCC ” button to select
℃/℉.
13. Press “ SET ” button to select the Barometric Unit. Default
setting: inHg . Press “▲/CH” or “ ▼/RCC ” button to select
unit: mmHg, inHg or hPa/mb optional. Barometer range:
800-1100hPa/mb (600-825 mmHg, 23.62-29.53 inHg ).
14. Press “ SET ” to select Beep ON/OFF. Default setting:
ON. Press the “▲/CH” or “ ▼/RCC ”button to select ON/OFF.
15. Press “ SET ” button to select Weather. Press “▲/CH” or
“ ▼/RCC ” button to select weather:
Sunny, Partly Cloudy, Cloudy, Rainy and Snowy optional.

11
3.1 Alarm Time Setting
1. Press and hold“ ”button to enter into alarm time setting.
2. Press “▲/CH” or “ ▼/RCC ” button to adjust data, press
and hold “▲/CH” or “ ▼/RCC ” button will quickly change
the value by 8 steps.
3. The setting order is: Hour → Minute→ Exit.
4. During setting, touch top button to save and exit setting.
5. During setting, if no operation for 20 seconds, it will
automatically save and exit setting.
6. The alarm is default ON after setting the alarm time.
Alarm symbol will display on screen.
3.2 Alarm ON/OFF Setting
1. When in time display mode, press“ ”button to check alarm
time.
Press “ ” button twice to turn ON/OFF alarm by the
ON/OFF of symbol .
2.When in alarm time display mode, press “ ” button to
turn on/off the alarm by the ON/OFF of symbol .
3.3 Snooze Function
1. When the alarm is ringing, press any other button except top
button to stop the alarm. And the alarm will restart next day.
2. Or when alarm is ringing, press the top button to activate snooze
function. The alarm will ring again in 5 minutes snooze interval.
And the“ ”symbol will be flashing on screen to indicate the
snooze mode. Press any other button except top button to exit
the snooze mode. And the alarm will restart next day.
3. When alarm rings, the ascending “Bibi” alarm sound will
last for 2 minutes if no operation.
3. ALARM AND SNOOZE FUNCTION

12
1. Press “MEM” button to check maximum temperature and
humidity, the value will display for 5 seconds.
2. Press “MEM” button second time to check the minimum
t
emperature and humidity, the value will display for 5 seconds.
3. Press “MEM” button third time will return to standard mode.
4. Press and hold “MEM” button will clear the max and min
records and reactivate the memory.
5. Normally, the Max and Min record will update every 24 hours
at 0:00.
4. TEMPERATURE & HUMIDITY MAX AND MIN RECORDS
5. ARROW TRENDS INDICATION
Temperature Humidity
Arrows
Indicator
temperature increase
by 1.8℉ within one hour or
compared with last reading
humidity increase by
5% RH within one hour or
compared with last reading
temperature decrease
by 1.8℉ within one hour or
compared with last reading
humidity decrease by
5% RH within one hour or
compared with last reading
6.1 Check and Turn ON/OFF Alerts
1. When in time display mode, press “ALERTS ” button to
check temperature alerts.
2. Press “ALERTS ” button to select the alert you want to turn
on/off(alerts checking order in the step 3). Press “▲/ CH ” or
“ ▼/RCC ” button to select ON or OFF. (Default setting: OFF)
6. TEMPERATURE ALERTS

13
3. Setting orders: Outdoor High Temperature Alert→ Outdoor
Low Temperature Alert→ Indoor High Temperature Alert →
Indoor Low Temperature Alert→ Exit.
Default setting: High Temperature Alert: 35 ℃(95℉),
Low Temperature Alert: 10 ℃(50℉).
4. Temperature alerts symbol will display on screen after
alerts turned on.
5. Press any button to stop the alert sound when alert rings.
6. Touch top button any time to save and/or exit.
7. If no operation for 5 seconds, it will automatically save
and/or exit.
6.2 Temperature Alerts Setting
1. When in time display mode, press and hold “ALERTS ”
button to enter temperature alerts setting. The temperature
alert value will be flashing.
2. Alerts setting order: Outdoor High Temperature Alert→
Outdoor Low Temperature Alert→ Indoor High Temperature
Alert →Indoor Low Temperature Alert→ Exit.
3. Press “▲/ CH ” or “ ▼/RCC ” button to adjust the value.
Hold to adjust quickly.
4. Press “ALERTS” button to confirm and move to next alert
setting.
5. During setting, touch top button to save and exit setting.
6. During setting, if no operation for 20 seconds, it will
automatically save and exit setting.
• When in Circular Channels Mode, check or set the alerts, it will
automatically exit channel scan display mode.
• When in current outdoor sensor channel, the alert symbol will
continue flashing on the screen until alert value is out of alert range.
• Four temperature alerts setting: indoor and outdoor 3 channels.
Note:

14
The forecast on this device can not compare to the professional
weather forecast devices supported by satellites or
high-performance computers. It provides an approximate indication
of the weather trends.
Notes:
The weather forecast icon will be shown after power on. There
are 5 kinds of weather modes: Sunny, Partly Cloudy, Cloudy,
Rainy, Snowy. The weather icon displays are based on the
hourly calculation of indoor/outdoor temperature & humidity
and barometer data. The main unit forecasts the next 12 hours
of weather with 70% - 75% accuracy.
Sunny Partly Cloudy Cloudy Rainy Snowy
7. WEATHER FORECAST
1. After power on, the main unit dynamically displays the baro
-metric pressure changes for the last 12 hours. The histogram
is always flashing.
(Note: This function can not be switched off)
8. BAROMETRIC PRESSURE HISTORY
2. The barometric is built into the main unit, this device
displays the barometric value where the main unit is placed.
3. Due to product design, the barometric pressure value can
not be calibrated manually.

15
The main unit indicates indoor/outdoor comfort in 5 levels
according to the humidity values.
9. COMFORT LEVEL INDICATOR
• When current outdoor channel’s temperature is in the range
of 32℉~37.22℉(0℃~ 2.9℃), the alert symbol “ ” will be
flashing with 1 second “BIBIBI ” sound until the temperature
reading is higher than 37.22℉; the symbol will keep displaying
on screen if temperature is lower than 32℉.
11. FROST-POINT ALERT
New Moon Waxing Crescent First Quarter Waxing Gibbous
Full Moon Waning Gibbous Last Quarter Waning Crescent
10. MOON PHASE
DRY GOOD HUMID DRY GOOD HUMID D RY GOOD HUMID DRY GOOD HUMID DRY GOOD HUMID
Display
Humidity
TOO DRY:
1~25%
DRY:
26~39%
GOOD:
40~75%
WET:
76~83%
TOO WET:
84~99%

16
• After powering on, touch “ ” button to adjust the
brightness of the backlight.
• Backlight brightness can be adjusted from 10%, 50%, 100%
and off.
12. ADJUSTABLE BACKLIGHT
• About Outdoor Sensor: When battery indicator shows next to
the outdoor temperature, please replace the batteries in the
outdoor sensor.
• About Cell Battery in Main Unit: The CR2032 cell battery is
only for memorizing the setting during sudden power outage.
When battery indicator shows next to the indoor temperature,
please replace the cell battery.
13. LOW BATTERY INDICATOR
The data of weather forecast and outdoor humidity & temperature
come from outdoor sensors. Make sure the outdoor sensor place in a
proper place.
1. The sensor should be protected from direct sunlight and rain.
14. OUTDOOR SENSOR INSTALLATION

17
2. Keep well-ventilated and leave a certain space of gap between the
sensor and the wall to avoid blocking the vent of the sensor.
3. Place the sensor at a height about 1.2-2.5 meters/3.93-8.20 feet
vertically.
4. Place the sensor near the main unit. Avoid thick walls between the
units or or strong interference source using same signal frequency
(433MHz), such as TVs, microwaves, computers, etc.
5. If the main unit disconnects most likely the sensor is too far from the
main unit. Please place it nearer to the sensor. Transmission Range:
100m/330ft in open area.
6. Vertically placement is required:
≥ 2m
Lift with a rope
Place on a
stable surface
Hang from the back
hole using a nail

18
Allow the main unit and the sensor together at the same position for
30 minutes to establish a strong connection.
Note:
15. TROUBLE SHOOTING
Problem
Outdoor reading
is flashing or
showing dashes
Press and hold the "▲/CH " button for 5-6 seconds to
reconnect the sensor ( (Please switch the channel of the
out door sensor to CH1). If the issue can not be solved,
please try to restore factory settings.
No outdoor
sensor reception
Put put the main unit and outdoor sensor together, and
then press and hold the "▲/CH " button for 5-6 seconds to
reconnect the sensor. If the issue can not be solved, please
try to restore factory settings.
RCC function
does not work
Put to the the main unit close to the window or take it to
outdoor to enhance the signal reception.
Inaccurate
weather forecast
The weather forecast is an estimate or generalization of
weather changes in the next 12 to 24 hours, with an
accuracy rate of about 70-75%. It is simply a tool for
projecting weather conditions and is never to be relied
upon as an accurate method to predict weather.
Possible Solution
Inaccurate
temperature/
humidity
When the temperature/humidity is inaccurate, it is often
due to the location of the display or overpowered/under
powered batteries. You can test the accuracy at you home.
Side-by-side test: Bring the sensor in the house and place
it next to the weather station for 2 hours.
1. Temperature: Compare indoor and outdoor temperature.
The temperature should be within 3.6℉ to be within tolerance.
2. Humidity: Compare indoor and outdoor humidity. The
temperature should be within 5%RH to be within tolerance.

Problem
Outdoor sensor
drains
batteries quickly
Test a new set of alkaline batteries. Do not mix old and
new batteries. Heavy duty or rechargeable batteries are
not recommended.
Inaccurate
barometric
value
The barometer is built into the main unit, the screen displays
the barometric value where the main unit is placed. Please
allow a 5MPA tolerance.
If your BALDR product does not operate properly after trying the
troubleshooting steps, please contact the seller on your order page or shoot
an email to: [e-mail]
“HH.H/LL.L”
display inindoor
and/or outdoor
temperature
If the temperature is higher than the detection range,
“HH.H” will display on screen for indication; if lower than
the detection range, “LL.L” will display on screen for
indication.
The buttons
doesn't workable
suddenly
Within 7 minutes of receiving RCC radio signal, the other
buttons have no response except “▼/RCC ” button.
You can press and hold the “▼/RCC ” button to exit RCC
receiving.
Incorrect
weekday
display
Press and hold “ SET ” button to set the correct Year.
Possible Solution
If meet some issues can not be solved, please try to restore factory
settings.
1.Unplug the adapter of the weather station.
2.Remove the CR2032 battery from the main unit.
3.Remove the batteries from the sensor.
4.Plug the adapter of the weather station and make sure the channel
fix at CH1, then place the main unit vertically on the table.
16. FACTORY SETTINGS
19