BALDR B0359WST4H4PR User manual

MODEL:B0359WST4H4PR
WIRELESS COLOR WEATHER STATION
WITH 3 REMOTE SENSORS
QUICK SETUP GUIDE
1
inHg
mmHg
hPa mb

2
POWER ON
1.Main Unit Installation
2.Sensor Installation
AC Hole
Step1, Peel off the protecting
mask of main unit.
Step 3, Remove the built in cell battery insulation strip.
Switch to CH1
Switch to CH2
Switch to CH3
Step 1, Select the
channel on each sensor
Step 2,Plug the AC Adaptor
to a powered outlet.
Step 2, Load the 2xAA batteries
to each sensor within 3 minutes
to ensure RF signal received in time.

Press and hold “CH” button for 3
seconds to search RF signal again.
inHg
mmHg
hPa mb
3
1.After Power On
LCD will full display for 3
seconds with “BI” sound.
NOTE:
SET
CH
MEM
RCC
/
SET
CH
MEM
RCC
/
MAIN UNIT SETUP
After 3 seconds, the LCD will
display the datas as below
If not powered on within 3 minutes
from main unit powered on
2. Time&Date&Month&Weekday
( Calibration after RCC signal
received or manual setup)
4. Indoor temperature and humidity
hPa mb
1. Weather Forecast Icon
3. Barometer(flash for 10 seconds)

4
4.RCC Radio Signal Receiving Automatically
RCC Radio Signal Searching for 7 Minutes
The antenna symbol is flashing.
The backlight brightness will go
dim to 3% and no buttons except
▲/RCC will function.
Press & hold the ▲/RCC button
will allow exiting the Atomic mode
to continue manual setup.
Outdoor
datas
Automatically display,
and the antenna
signal will stop flash.
2.RF Signal Searching 3.RF Signal Received
The receiving antenna
signal will flash
hPa mb
SET
CH
MEM
RCC
/
hPa mb
hPa mb
Antenna Signal SET
CH
MEM
RCC
/

5
No RCC Radio Signal Received
Manual setup SETUP ORDER
The antenna symbol
will disappear
Press and hold “▲/RCC ”
button for 3 seconds
to search RCC radio signal again
● Press and hold “SET” button to
enter into setup (3 seconds).
● Press and release “SET”
button to skip setting or go to
next setting option(1 second).
hPa mb
SET
CH
MEM
RCC
/
SET
CH
MEM
RCC
/
Weekday
Language
1
Year
4
Date
7
Barometer
Unit
8
RCC
ON/OFF
9
Time
Zone
10
DST ON/OFF
(ONLY FOR
US VERSION)
11
Weather
12
Month&Date
display format
5
Month
6
Hours
2
Minutes
3
SET
CH
MEM
RCC
/
SET
CH
MEM
RCC
/

6
Press “▲/RCC ” button to
increase the values.
SET
CH
MEM
RCC
/
Press “▼”button to
decrease the values.
This Qucik Start is to help you quickly set up the product. For detailed
settings, please refer to the user manual, or scan the QR code below
for relevant product information and operation video link.Thank you.
*Tips: press and hold “▲/RCC” or “ ▼ ” button will quickly change the
value.
SET
CH
MEM
RCC
/
www.baldr.com
:[e-mail]
:1-833-381-5659
SET
CH
MEM
RCC
/
SET
CH
MEM
RCC
/