Balt 34730 User manual

Champ Big & Tall Chair

#34730

Email us at

if you have Missing or Damaged Parts

[email protected]

24 Hours a Day 7 Days a Week

Should you require assistance during

assembly, please call our Customer

Service Department Monday - Friday

8 a.m. - 5 p.m. Central Standard Time

1-800-749-2258

Parts/Hardware

Do not use unless all screws are tight. At least every six months, check all

screws to be sure they are tight. If any parts are missing, broken, damaged

or worn, stop using the product until repairs are made by your dealer using

factory authorized parts.

P1 P2 P3

P4 P5 P6

Back 1 EA Seat 1 EA Base 1 EA

Seat Support 1 EA Cylinder 1 EA Casters 5 EA

P7 P8

1”- Screws

4 EA 1 1/4”-Screws

4 EA

STEP 1

Push in five Casters (P6) into the bottom

of the Base (P3). Insert the Cylinder (P5)

into the top of the Base (P3).

STEP 2

Attach the Seat Support (P4) to the bottom

of the Seat (P2) using four 1” Screws (P7).

Tighten Screws with a Phillips screwdriver.

P4 P2 P7

STEP 3

Attach the Back (P1) to Seat Support (P4)

using four 1 1/4” Screws (P8). Tighten all

Screws with a Phillips Screwdriver.

STEP 4

Insert the top of the Cylinder (P5) into the

large center hole in the Seat Support (P4).

P8 P4

34730_07-10-12

2The Balt product you have purchased is guaranteed against material and workmanship defects. Thisguarantee extends 1 year from date of purchase. Should this product fail to function satisfactorily under normaluse due to defect or imperfection, the defective part or product will be replaced. Damage caused by commoncarriers during shipment is not included in this guarantee. This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressedor implied shall apply. Failure to follow instructions found in Important Information Section of OwnerSheet shall void the guarantee. Consequential or incidental damages and or costs are not refundable.Important34556-09/09/23STEP 1STEP 2STEP 3STEP 4STEP 586710342591121113114

Table of contents