B&G PISTOL PRO 700 User manual
Before S ar ing
Trouble Shoo ing
Opera ing Ins ruc ions
700 Series Models
P STOL PRO 700
USER’S MANUAL
Problem: Gun is leaking from: 1) the front of the tip, or,
2) behind the tip
Solution: 1) Tighten tip retainer, clean nozzle
2) Clean or replace soft seat gasket
Problem:
Leaking at bottom of the gun or the top of the bottle
Solution: • Tighten reducing nipple connection
• Tighten hose barb, check o-ring for damage
or replace
• Replace Teflon tape
Problem: Extenda-Ban valve or tip on Pistol Pro Platinum
leaking
Solution: • Tighten packing nut on valve
• Replace packing washers in valve
Problem: Foam from foaming tip is watery or not thick enough
Solution: • Add more foaming agent to bottle
• Clean the siphon tube with fresh water
• Do not pressurize with any gas
• Do not pressurize an empty tank.
• Open tank cap slowly to release air before removing; keep
bottle upright when releasing pressure
• Do not transport while pressurized.
• Do not treat voids with electrical
outlets or cables.
• The end of wood-injection tip is sharp
and must be handled with care.
• Flush bottle, valve, and siphon tube
with clean water regularly.
• nspect and clean the tip of the
siphon tube regularly.
• Clean the filter in front of the soft
seat gasket regularly.
• Protect application tips when not in
use.
• Engage the safety lock on the gun valve.
• Tighten bottle until snug, do not over-tighten
bottle.
4-Way, C+C Tip
• For typical pest control operations, indoors and outdoors.
Foaming Tip
• Add foaming agent to liquid insecticide to produce foam, tip
adjusts to produce thick or limited foam. Suitable for treat-
ing floor drains with the B&G microbial cleaner, MicroFoam
EF for small fly control.
Wood-Injection Tip
•Suitable for penetrating surface of infested wood to
intersect insect galleries; this tip
delivers foam or liquid.
• Drill a 1/16 in. hole into the wood
surface or push the pointed tip
through wood surface into gallery.
4-Way,
C+C Tip
Wood-Injection
Tip
Foaming Tip
Care and Main enance
Filling Bottle (1 pint, 1 q art)
• To ensure adequate air pressure in bottle, do not fill to the
top of the bottle, allow 1/3 of bottle for head space.
•Foaming agent must be added to bottle of the Foaming Tip
Model.
• Mix and use all insecticides in accordance with
label directions.
Press rizing
• Connect bottle to portable battery-operated
compressor (#24013750) using the quick-con-
nection.
• Connect bottle to tire-pressurizing pump using
the tire-type valve.
• Pressurize the bottle to 60-80 psi, do not over-
pressurize.
Safe y Precau ions
24010028 Rev 7/10
135 REGION SOUTH DRIVE • JACKSON, GA 30233
Toll Free 800-544-8811 • Phone 678-688-5601
www.bgequip.com • F x 678-688-5633
# Part # Description
1 22046300 SP-159 soft seat gasket
1A 22032720 200 mesh screen
2 22067312 30-L Gunjet
4 24010051 Adapter
5 22071801 Quick connect
5A 22026700 Nipple pipe 1/8”
6 22054900 Air valve
7 24010003 Gauge, 160 psi
8 24010002 O-ring
9 24013050 Hose barb fitting
10 24013052 Siphon hose, 1 pint
10 24010039 Siphon hose, 1 quart
11 24010710 Bottle + cap, 1 pint
24010715 Bottle + cap, 1 quart
12 24013050 Siphon weight
15 22049468 5850CC tip assembly
16 22049200 5700-B tip ext
17 22071785 5700-2 void tip 2”
18 22033100 TC-160 tip cap
19 24010059 Needle assembly
20 23083601 Adjusting nozzle
21 22036655 Foam tip assembly
PISTOL PRO 700 SERIES
# Part # Description
1 24013050 Siphon weight
2 24010710 Bottle + cap, 1 pint
24010715 Bottle + cap, 1 quart
3 24013052 Siphon hose, 1 pint
24010039 Siphon hose, 1 quart
4 24013050 Hose barb fitting
5 24010003 Gauge, 160 psi
6 22054900 Air valve
7 22071801 Quick Connect Plug
7A 22026700 1/8” pipe nipple
8 24010016 Adapter
9 22072098 Coiled hose assembly
10 M-22055445 2206 brass valve
11 22046300 Soft seat gasket
11A 22032720 200 mesh screen
12 22049468 5850 tip assembly
13 22049200 5700-B tip extension
14 24010002 O-ring
PISTOL PRO PLATINUM
B&G Help Line
800-544-8811
