Kennedy VPS055 User manual

PIPE VICE & STAND
Kennedy Tools ontinually strives to improve its produ ts, spe ifi ations may hange without prior noti e.
OPERATOR’S MANUAL
Please retain this information for future referen e.
WARNING:
THE SAFETY INFORMATION GIVEN INSIDE MUST BE
READ AND UNDERSTOOD BY ANY ERSON USING, INSTALLING,
RE AIRING OR MAINTAINING THIS RODUCT.
MODEL: V S055
KEN-588-8220K
MODEL V S085
KEN-588-8240K
• Corrosion resistant coating
• Integral tool tray
• Wide angled legs for
greater stability
These instructions are also
suitable for models TSS055 &
TSS085 (Stands only)
• Used for repetitive tasks
on pipework
• Folding design for easy
storage and transportation
• The frame of the pipe vice
is made from cast iron with
jaws made from hardened
tool grade alloy steel
• The top jaw of the pipe
vice is held in position
with a hook which
automatically engages
when the vice is closed
© The Kennedy Group Ltd. 07/18
THE KENNEDY GROU , WIGSTON. LEICESTER, ENGLAND. LE18 2FS.
THE ENVIRONMENT
Always dispose of unwanted tools, a essories and pa kaging materials in an environmentally
friendly manner.
QUALITY GUARANTEE & WARRANTY
KENNEDY TOOLS carry a one year manufacturer’s warranty.
KENNEDY TOOLS are designed & manufactured
to the highest standards & specifications.
Assuring the quality and performan e required by all se tors of industry.
KENNEDY TOOLS are fully guaranteed against
faulty materials & workmanship.
Should they be found to be defe tive, they will either be repaired or repla ed
free of harge (fair wear and tear and/or misuse ex epted).
lease retain supplier invoice as proof of purchase.

SAFETY GUIDELINES
lThis item is heavy, take are when lifting heavy obje ts.
lBefore ea h use, ensure that all nuts and bolts are orre tly fitted and are tight.
lWhen working with long lengths of pipe you may need to support the other end of
the pipe.
lKeep hildren and unauthorised people away from the work area.
lKeep the work area lean and tidy.
lUse on a level and firm surfa e. Do not use on tarma or soft surfa es.
lStore in a se ure, dry pla e.
MODEL ORDER CODE DESCRIPTION
VPS055 KEN-588-8220K Pipe Vice & Stand 8-55mm
VPS085 KEN-588-8240K Pipe Vice & Stand 10-85mm
VP055 KEN-588-8020K Pipe Vice 8-55mm
VP085 KEN-588-8040K Pipe Vice 10-85mm
VP100 KEN-588-8060K Pipe Vice 15-100mm
TTS055 KEN-588-8520K Stand & Tool Tray for 55mm Vice
TTS085 KEN-588-8540K Stand & Tool Tray for 85mm Vice
KENNEDY thoroughly recommends reading these instructions before using
the ipe Vice & Stand, even if you have used one before. Reading these
instructions carefully and understanding them fully will enable you to erect the
stand correctly and will prevent injury to yourself or someone else.
TOOLS NEEDED: 17mm socket or spanner
1) Open out the wooden base (A) so that it is flat on the floor. (fig. 1)
2) Remove the 17mm nut and bolt (B) holding the rear leg (C). (fig 2)
3) Turn the rear leg (C) upside down and refit. (fig. 3)
4) Raise the metal tray (D) into the horizontal position, lo ating the hooks onto the
bars on the rear leg (C). (fig. 4)
INSTRUCTIONS FOR USE
fig. 1 fig. 2
(A)
(A)
(C)
(C)
fig. 3
fig. 4
fig. 5
(C)
(C)
fig. 6
(B)
(B)
(C)
(C)
THE KENNEDY RANGE
5) The wooden base an be raised and held in the verti al position with the rubber
restraining strap (E). (Fig 5)
6) It is now ready for use with the Kennedy Pipe Vi e. (fig. 6) Be sure to keep the
stand on a level floor.
D)
(D)
(E)
(E)
3
2