Banner Sensors T-GAGE M18T User manual

bannerengineering.com

Detects temperature difference between
object and surroundings
 Monitors user defined window using
analog or discrete outputs
 Senses temperatures from 0° to 300° C
 Sensitive to temperature contrasts of 3° C
or more
 Works even if target object is not moving
 Requires no emitter, controller or external
amplifier
 Features easy-to-use TEACH-mode
programming; no potentiometer
adjustments
 Fully encapsulated electronics for harsh
sensing environments
 Available in 3 models for different target
sizes and distances
The T-GAGE M18T sensor is not intended for absolute temperature measurement or for safety-related fire detection use.
Robust, Non-Contact Sensor for Monitoring
Temperature Changes
The T-GAGE®M18T is a passive, non-contacting temperature-based device that combines
the ease-of-use of a photoelectric with the brain power of a more sophisticated sensor.
Using a thermopile device to reliably detect objects that are hotter or colder than the ambient
condition, the M18T is used to verify and inspect control processes.
Compact sensor
for reliable
detection of
changes as small
as 3° C
Temperature sensing
for a wide variety of
industries
 Hot product detection
 Flame process
verification
 Hot glue detection
and monitoring
 Heat seal monitoring
 Cold product
detection
 Roller monitoring
 Ejection verification
 Process equipment
and fixture
monitoring
 Gearbox monitoring
Rugged, easy-to-use sensor in
a choice of models
 18 mm stainless steel threaded barrel
 A choice of “Three Distance to Spot Ratios”
for different target sizes and distances
• General-purpose sensing: 8:1
• Food packaging: 6:1
• Narrow-field-of view for smaller
targets: 14:1
 Discrete (bipolar NPN/PNP) and analog
(0-10V or 4 to 20 mA) models
 Static and dynamic TEACH-mode
programming
 Fast 25 millisecond response time
 Leakproof design—IP67; NEMA 6 rated
 2 m or 9 m attached cable, or Euro-style
quick-disconnect
Advanced Monitor Software
 Shows threshold adjustment
 Provides real-time information
display through a PC
T-GAGE®
M18T Sensors
Powerful Temperature
Sensing Made Easy
www.bannerengineering.com
1.888.373.6767

Banner Engineering Corp.
9714 Tenth Avenue North • Minneapolis, Minnesota 55441 • [phone] • Fax: [phone]
Toll-free: 888-373-6767 • www.bannerengineering.com • Email: [email protected]
P/N 123346 Rev. B
Style Model Length
5-pin Euro-Style
straight,
with shield
MQDEC2-506 2 m
MQDEC2-515 5 m
MQDEC2-530 9 m
5-pin Euro-Style
right-angle,
with shield
MQDEC2-506RA 2 m
MQDEC2-515RA 5 m
MQDEC2-530RA 9 m
Quick-Disconnect (QD) Cordsets
200 400 600 800 1000
Distance (mm)
Spot Size
(see table)
Sensor
D:S
Ratio
Distance From Sensor Face Versus Spot Size
100 200 300 400 500 600 700 800 900 1000 Distance (mm)
6:1 17 33 50 67 83 100 117 133 150 167
Spot Size (mm)
8:1 13 25 38 50 63 75 88 100 113 125
14:1 7 14 21 29 36 43 50 57 64 71
Sensing Field of View
www.bannerengineering.com
L
ø 18.0 mm
Model Cable* D:S
Ratio Sensing Face Supply
Voltage
Length
(L) Output Data
Sheet
M18TB8 2 m 8:1 Integrated lens
(general purpose)
10-30V dc
81.2 mm
Bipolar
(NPN/PNP) 120632
M18TB8Q 5-pin Euro QD 91.3 mm
M18TB6E 2 m 6:1 Enclosed plastic face
(for food industry use)
81.7 mm
M18TB6EQ 5-pin Euro QD 91.8 mm
M18TB14 2 m 14:1 Germanium lens
(narrow field of view)
86.5 mm
M18TB14Q 5-pin Euro QD 96.6 mm
M18TUP8 2 m 8:1 Integrated lens
(general purpose)
12-30V dc
81.2 mm
0-10V dc
Analog
plus
1 PNP
Alarm
123698
M18TUP8Q 5-pin Euro QD 91.3 mm
M18TUP6E 2 m 6:1 Enclosed plastic face
(for food industry use)
81.7 mm
M18TUP6EQ 5-pin Euro QD 91.8 mm
M18TUP14 2 m 14:1 Germanium lens
(narrow field of view)
86.5 mm
M18TUP14Q 5-pin Euro QD 96.6 mm
M18TIP8 2 m 8:1 Integrated lens
(general purpose)
12-30V dc
81.2 mm
4-20 mA
Analog
plus
1 PNP
Alarm
123698
M18TIP8Q 5-pin Euro QD 91.3 mm
M18TIP6E 2 m 6:1 Enclosed plastic face
(for food industry use)
81.7 mm
M18TIP6EQ 5-pin Euro QD 91.8 mm
M18TIP14 2 m 14:1 Germanium lens
(narrow field of view)
86.5 mm
M18TIP14Q 5-pin Euro QD 96.6 mm
* For 9 m cable, add suffix W/30 to the 2 m model number (example, M18TB8 W/30).
A model with a QD requires an accessory mating cordset.
T-GAGE® M18T Models Dimensions
Model Description
APC-18
Air-Purge Collar
• Prevents water, dust and other airborne contaminants from collecting on
the sensor lens
• Helps cool sensors affected by ambient heat in sensing environment
LAT1812 Laser
Alignment Tool
• Includes one SMB1812 bracket and M12 laser emitter
• Enables easy sensor alignment at long distances
• Provides a precise laser spot for aiming sensor
DPB1
Portable
Programming
Box
• Visual status indicators
• Remote TEACH button
• Serial communication link for PC interface.
• Optional 115V ac power supply available (SP-DPB1)
P/N 63210
RJ11 to DB9
Interface Cable
• DPB1 to PC serial cable
Additional Accessories
Model Description
SMB18A • Right-angle mounting bracket with a
curved slot for versatile orientation
• 12-gauge stainless steel, 18 mm
sensor mounting hole
• Clearance for M4 (#8) hardware
SMB18UR • 2-piece swivel bracket
• 300 series stainless steel, 18 mm
sensor mounting hole
• Stainless steel swivel locking
hardware included
SMB18SF • 18 mm swivel bracket with M18 x 1
internal thread
• Black thermoplastic polyester
• Stainless steel swivel locking
hardware included
Brackets
NOTE: Take advantage of the full capabilities of the
T-GAGE by using the following items:
 •AdvanceMonitorSoftware
 •DPB1PortableDemoBoxwithSP-DPB1
115Vacpowersupply/batteryeliminator
 •DPB1toPCinterfacecable