Banner Measuring Light Screen EZ-ARRAY User manual

EZ-ARRAY™
EZ-ARRAY™
Measuring Light
Screen
• Two-piece design with integrated
electronics eliminates the need for a
controller
• Resolution of 5 mm and 2,5 mm for
edge guiding, allowing high precision
detection
• Sensing distance ranges from
400 mm up to 4 m
• Measuring heights range from
150 mm up to 1800 mm in 150 mm
increments to cover all configurations
• Visual aspects feature:
- 3-LED status indication
- 3-digit display giving advanced
diagnostics
- 7-segment bar graph for
alignment and blocked zone
indication
• Multiple output options:
- x2 digital (PNP & NPN)
- x2 analogue
(4-20 mA or 0-10 VDC)
- Serial Modbus communication
• Robust aluminium housing with
metal end caps and M12x1 connector
(standard); brackets and T-nut slots
allow flexible mounting
• Convenient configuration through
DIP-switch setup or included software
allows advanced settings
Solving complex applications
using simple set-up

Park Lane, Culliganlaan 2F
1831 Diegem • Belgium
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
Web: www.bannereurope.com
BANNER ENGINEERING EUROPE
E-A080 – 01/2007
Authorised distributor:
SAFETYSENSORS VISION
Objective: Measure height, length and width of boxes for
storage and collect profile information for shipping.
Description: The boxes pass through vertical, horizontal
or perpendicular mounted EZ-ARRAY pairs to determine
where the proper storage location should be.
Box Profiling
Objective: Determine tyre size on a conveyor.
Description: The outer and inner diameter of each tyre is
determined. The controller determines if the tyre is one of
two required sizes, and directs it down the corresponding
conveyor. If the tyre is found to be of neither size, it is sent
to a reject bin.
Tyre Sorting
Objective: Determine the diameter of a log before it has
entered a station used for bark removal.
Description: An EZ-ARRAY determines the diameter of
the log by the total number of beams blocked, to adjust the
log grippers and bark removing blades for process stability.
Log Diameter
3-Digit
Diagnostic
Display
Bi-Colour
Zone
Indicators
Dip Switch
Configuration
Alignment/
Blanking
System Status
Modbus Activity
Modbus Error
Included software contains
more advanced settings
M12x1 Connector