Mounting brackets:
SMBQS18A SMBQS18AF SMBQS18Y SMB3018SC SMB18A SMB312S
Easy set-up
• Potentiometer or Teach Function for Expert version
• Easy adjustment featuring a specially moulded stop which
prevents over-adjustment damage; no extra tools needed
Rugged sealed housing
• Polycarbonate/ABS housing, rated
IEC IP67
• High optical-quality acrylic lens which
resists harsh environments
Easy diagnostics
• Bright LED operating status
indicators which are visible
from 360° show: power ON,
output overloaded, active
output and marginal sensing
conditions
Easy Installation
• Models available with or
without 18 mm threaded
“nose”
• Side mounting
Connections (model dependant)
• 2 m or 9 m 4-wire PVC cable, integral 4-pin
Pico- (M8) or Euro-style (M12) connector, 4-pin
Pico- (M8) or Euro-style (M12) 150 mm pigtail QD
• Solid-state complementary (SPDT): NPN or PNP output,
model dependant
Mode Models and Ranges
Opposed
Type E/R : 20 m
Type EB/RB : 3 m
Retro
(polarised)
Type LP : 3,5 m
Laser Retro
(polarised)
Type LLP : 10 m with
BRT-36X40BM
Retro
(non-polarised)
Type LV : 6,5 m
Convergent
Type CV15 : 16 mm
Type CV45 : 43 mm
Diffuse Type D and DB : 450 mm
Laser Diffuse
Type LD : 300 mm
Divergent
Type W : 100 mm
Background
Suppression
Type FF50 : 50 mm (fixed)
Type FF100 : 100 mm (fixed)
Type AF100 : 100 mm (adj.)
Fibres
Type FP : plastic fibres
Type F : glass fibres
Laser Emitters
Type LE : Emitter
Type LE10 : Rounded
beam shape
Type LE11 : Vertical
beam shape
Type LE12 : Horizontal
beam shape
Type LE14 : Crossed
beam shape
TURCK BANNER Ltd.:
Sensors and equipment for industrial control and
automation:
• Inductive, magnet-inductive, photoelectric, ultra-
sonic, capacitive, pressure and flow sensors
• Ex interfaces
• Bus systems
• Temperature controls
• Cables and cordsets
• Safety systems
• Laser measurement and inspection devices
Turck Banner Ltd.
Blenheim House
Hurricane Way, Wickford
Essex SS11 8YT
Phone: +44 (0)1268 578 888
Fax: +44 (0)1268 763 648
info@turckbanner.co.uk
www.turckbanner.co.uk
E-A025
12/04
TBLTD
