Banner QS30H20 User manual

www.bannerengineering.com
1.888.373.6767
WORLD-BEAM®
bannerengineering.com
Reliable liquid detection
in WORLD-BEAM®
housing
Detect water and water-based
liquids inside containers
▶Fluid filled IV bags
▶HDPE milk containers
▶Clear glass test tubes
▶Colored PET beverage
bottles
▶Etched or frosted glass
containers
▶Liquid point level in
sight glass
▶Thin walled PFA/FEP tubes
▶Nozzle spray verification
Versatile models
to meet demanding
requirements
▶Robust housing with
30 mm threaded barrel
and integrated side mount
▶Receivers with a choice of outputs
and range
 • Models with bipolar NPN/PNP output
and 2 m range
 •High-gain models with bipolar
NPN/PNP output and 4 m range
 •Analog (0-10V) output with 4 m range
▶Light operate (LO) or dark operate (DO),
depending on model (discrete only)
▶Operating temperature from -20° to 60° C
▶Large output status indicator on back
of receiver
▶Bright LED status indicators on sensor top
▶2 m or 9 m attached cable or 5-pin Euro-style
pigtail quick-disconnect
QS30H2O
Opposed-Mode Water Sensors
▶Emits light that water-based liquids will
attenuate, enhancing contrast in
challenging low-contrast applications
▶Burns through many plastic and glass
containers
▶Detects water-based liquids including
liquor, beer, shampoos, conditioners,
lotions and sauces
▶Penetrates many labels (material thickness
and type dependent)
▶Features WORLD-BEAM QS30 housing
with popular 30 mm threaded lens and
side mount
▶Specified ranges of up to 4 m
(longer range possible)
▶Offers built-in electronic crosstalk avoidance
▶Resists harsh environments with rugged IP67
(NEMA 6) housing and encapsulated electronics
▶Rated PW12 (1200 psi washdown)
▶Offers choice of 10 to 30V dc operation with
bipolar, NPN (sinking) and PNP (soucing) output
or 15 to 30V dc with analog (0-10V) output
▶Delivers highly visible power and output
status indicators
▶Includes accessory apertures to attenuate
or shape the beam
High-power, infrared sensor for reliable
detection of water and water-based liquids
The WORLD-BEAM®QS30H2O Sensor uses a 1450 nm sensing beam to burn through many types
of thin-walled glass and plastic containers, creating contrast for reliable liquid detection. The
QS30H2O Sensor is an innovative addition to Banner’s complete line of cost-effective, rugged and
powerful WORLD-BEAM photoelectric sensors.
Liquid detection for challenging clear or translucent plastic or glass containers

51.5 mm
44 mm
22 mm
WORLD-BEAM®QS30H2O Models
Brackets
Models Description
SMBQS30L
• Right-angle bracket for cabled sensors
• 14-ga. stainless steel
• ±12˚ tilt adjustment
• Clearance for M4 (#8) hardware
SMBQS30LT
• Tall right-angle bracket for QD sensors with straight cordset connectors
• 14-ga. stainless steel
• ± 8˚ tilt adjustment
SMBQS30Y
• Heavy-duty die-cast bracket with M18 vertical mounting option
• ± 8˚ tilt adjustment for cabled sensors
• Nuts and lockwasher included
SMB30SC
• Swivel bracket with 30 mm mounting hole for sensor
• Black reinforced thermoplastic polyester
• Stainless steel mounting and swivel locking hardware included
Banner Engineering Corp.
9714 Tenth Avenue North • Minneapolis, Minnesota 55441 • [phone] • Fax: [phone]
Toll-free: 888-373-6767 • www.bannerengineering.com • Email: [email protected]m
P/N 141524
iKnow®
Online
Training & Tutorials
A complete resource for tutorials, product
questions and answers— and the mechanics
and theory behind sensor technology available
online at www.bannerengineering.com
Q: Why does the sensor burn through
some materials but not others?
Q: Does the color of the container matter?
Q: Is there a certain percentage of
water necessary?
Q: Can I use this sensor to tell the
percentage of water content?
Q: Does the color of the liquid matter?
Q: Can I control the gain on this sensor?
Go online for answers to these questions or
to pose your own!
Quick-Disconnect (QD) Cordsets
Style Model Length Dimensions Female Pinout
5-pin
Euro-style,
straight
MQDC1-506
MQDC1-515
MQDC1-530
2 m
5 m
9 m
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
M12 x 1
ø 15 mm
44 mm
max.
2
3
5
4
1
Opposed-Mode Apertures
Aperture Model Description
Circular hole
APQS30-040 1 mm dia. - 6 each
APQS30-100 2.5 mm dia. - 6 each
APQS30-200 5 mm dia. - 6 each
Horizontal slot
APQ30-040H 1 x 12 mm dia. - 6 each
APQS30-100H 2.5 x 12 mm dia. - 6 each
APQS30-200H 5 x 12 mm dia. - 6 each
Vertical slot
APQ30-040V 1 x 17 mm dia. - 6 each
APQ30-100V 2.5 x 17 mm dia. - 6 each
APQ30-200V 5 x 17 mm dia. - 6 each
Kit
APQS30-DVHX2 Kit (two of each) -18 total
APQS30-DVH
Kit (included with each emitter/receiver)
containing one each of aperture models:
APQS30-040, APQS30-040H,
APQS30-040V
NOTE: The use of apertures will reduce the excess gain.
Sensing Mode Models* Range†Cable Supply
Voltage Output Data
Sheet
Opposed
(Effective Beam: 13 mm)
1450 nm infrared
QS30EXH2O
—
2 m
10 to 30V dc
—
136166
QS30EXH2OQ5 5-pin Euro Pigtail QD
QS30ARH2O
2 m
2 m Bipolar
NPN/PNP
LO
QS30ARH2OQ5 5-pin Euro Pigtail QD
QS30RRH2O 2 m Bipolar
NPN/PNP
DO
QS30RRH2OQ5 5-pin Euro Pigtail QD
QS30ARXH2O
4 m
2 m
10 to 30V dc
Bipolar
NPN/PNP
LO
QS30ARXH2OQ5 5-pin Euro Pigtail QD
QS30RRXH2O 2 m Bipolar
NPN/PNP
DO
QS30RRXH2OQ5 5-pin Euro Pigtail QD
QS30RXH2OU
4 m
2 m
15 to 30V dc 0-10V
Analog
QS30RXH2OUQ5 5-pin Euro Pigtail QD
* For 9 m cable, add suffix W/30 to the 2 m model number (example, QS30EXH2O W/30).
A model with a QD connector requires a mating cordset.
†Sensors can be used at ranges greater than listed for applications that require less excess gain. Please contact the factory for assistance on
your long-range applications.
OPPOSED
WATER DETECTION
Dimensions
www.bannerengineering.com