Barbeques Galore PROSMOKE KAMADO User manual

Assembly and Operating Instructions
PSMKKAM
Supplied in two cartons:
PSMKKAMA(BBQ)
PSMKKAMB(CART)
Make sure you have both cartons!

Follow
02
G
season

03
G
With
initially
With

04
500 grams
500 grams
can cause food poisoning (e.g. bacteria strains such as E. coli).
With

05
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
Z
4PCS
2PCS
2PCS
2PCS
1PC
1PC
1PC
1v
1PC
1PC
1PC
2PCS
1PC
1PC
2PCS
2PCS
2PCS
1PC
16PCS
4PCS
2PCS
2PCS
4PCS
1PC
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Support Bracket
Locking Caster Wheel
Caster Wheel
Bracket Crosspiece
Cooking Grill
Fire Ring
Charcoal Grate
Fire Box
Ceramic Body
Bumper Brackets
Bumper
Lid Handle Brackets
Lid Handle
Top Vent
Side Shelf
Left Shelf Brackets
Right Shelf Brackets
Ash Tool
Small Bolt for Support Bracket
Dome Nut -for Caster Wheel
Medium Bolt for Lid Handle
Large Bolt for Top Vent
Regular Nuts
Rain Cover
PSMKKAM-01
PSMKKAM-02
PSMKKAM-03
PSMKKAM-04
PSMKKAM-05
PSMKKAM-06
PSMKKAM-07
PSMKKAM-08
PSMKKAM-09
PSMKKAM-10
PSMKKAM-11
PSMKKAM-12
PSMKKAM-13
PSMKKAM-14
PSMKKAM-15
PSMKKAM-16
PSMKKAM-17
PSMKKAM-18
PSMKKAM-19 M6*12mm
M5*22mm
M5*45mm
PSMKKAM-20
PSMKKAM-21
PSMKKAM-22
PSMKKAM-23
PSMKKAM-24

06
A
D
STEP II - To assemble the cart insert the two cross pieces (D) into one of the four brackets (A) at both the top and
bottom of the bracket as shown.
STEP III - Continue to insert the cross pieces (D) into each of the other three brackets (A).
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product.
Ensure that the lid is closed prior to assembly.
Assembly instructions
Ax4
Tx4
Bx2
Cx2
STEP I - Attach one the four pre-threaded castor wheels (B & C) to each of the four brackets (A) by pushing them
through the hole. Using an adjustable spanner secure each castor wheel with 1x Dome nut (T).

07
S
A
C
B
STEP IV - Secure the brackets (A) to the cross pieces (D) by using the 16x small bolts (S). Make sure the cart is
secure and all of the screws are tightened firmly.
STEP V - To place the Ceramic body (I) into the cart first remove all of the items (E), (F), (G, (H) that are inside of
the Ceramic body (I) to make lifting easier.
STEP VI - Use a minimum of two people when lifting the Ceramic body into the cart. Place one of your hands in the
bottom vent and the other under the body. Lifting by the hinge or the side tables could result
in injury and/or damage to the product.
STEP VII - Place the Ceramic body into the cart with the bottom vent facing to the front of the cart allowing the vent
to open and close without any interruption.
Assembly instructions

08
I
G
E
F
H
STEP VIII - When the Ceramic Body is secured firmly into the cart add the Firebox (H), Charcoal Grate (G), Fire
Ring (F) and Cooking Grill (E) into the body as shown above.
STEP IX - Press down on the castor levers (B) to lock the castor wheels to ensure the Kamado can not move
when in use

STEP X - Attach the Bumper Bracket (J) to the lid of the Kamado by using the 2 x pre-attached bolts and Dome Nuts.
STEP XI - Attach the Bumper (K) to the lower Bumper Bracket (J) using the 2 x pre-attached bolts and dome nuts.
STEP XII - Attach the handle (M) to the lid of the Kamado by first attaching 2 x Lid Handle Brackets (L) using the 2 x
pre-attached bolts and dome nuts. Attach the Lid Handle (M) to the Lid Handle Bracket (L) using 2 x
Medium Bolts (U) and Regular Nuts (W)
STEP XIII - Attach the Top Vent (N) to the lid top and align both the bolt holes. Secure using 2 x Large Bolts (V) and
Regular Nuts (W). Ensure that the top vent hinge is on the left hand side when assembling it.
09
I
J
J
Lx2
Wx2
M
U
Ensure that this top vent hinge is on the left hand side when assembling it.
Left side Right side
Vx2
I
N
W

10
Q
O
Q
R
Q
P
P
P
STEP XIV - Attach the 2 x Left Shelf Brackets (P) to the Kamado using the 2 x pre-attached bolts and dome nuts per
bracket. Please note the position shown in the above diagram.
STEP XV - Attach 2 x Right Shelf Brackets (Q) to the Kamado using the 2 x pre-attached bolts and dome nuts per
bracket. Please note the position shown in the above diagram.
STEP XVI - Insert each Side Shelf (O) by its hinge into each of the table brackets (P&Q).

11

12

13