Flexible and independent
The screen can turn around 360 degrees, allowing you
to adjust the display to face your audience, whatever
the setting.
The B-10 is completely self-contained so no external
power supply is needed. A diesel-fueled generator
provides 28 hours of continuous operation (at half
load) and power outputs via CEE 32A plugs.
The B-10 comes with a Barco LED-PRO for high quality
image processing. Flexibly choose the source needed
for the application, connect to the LED-PRO, and you
are on the road. The LED-PRO also allows for easy LED-
wall and source configuration, as well as effects pan &
zoom, freeze, logo store (transition to/from stored logo).
By means of its adjustable towbar, the B-10 is flexible
to be pulled by any vehicle with a 3500 kg towing
capacity.
Total display solution, easy as 1 - 2 - 3
Ready to operate in 15 minutes
Barco’s B-10 works according to the “Drive and Play” principle: you drive
to the event location, you pull out the screen, and the show is on in no
time. No need for trusses and structures to be set up, no need for
technical people on-site. The LED-wall can easily be put out of the trailer
by means of a simple lever-control. Only one person is needed to
perform this set-up, and the B-10 can be ready to operate in 15 minutes.
High-quality LED screen
The LED tiles that come in this flexible total display solution, are Barco’s
wellknown 10mm pixel pitch outdoor SLite 10 XP tiles, in a 4x4
configuration (9.6m2- 103.3ft2).
Fully engineered and manufactured by Barco, they offer cutting-edge
LED display technology and design quality. An extremely stringent
selection of the LED components together with Barco’s extensive
experience in image processing and generation guarantees ultimate
picture quality, color uniformity and total system reliability. Furthermore,
the SLite tiles are designed to perform in any weather condition: they
are IP65 rated and TUV approved.
