Barco Coronis 3MP LED User manual

Coronis 3MP LED Display
User Guide
MDCG-3221
K5902060/04
01/10/2015

Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
Phone: [phone]
Fax: [phone]
Support: www.barco.com/en/support
Visit us at the web: www.barco.com
PrintedinBelgium

Table of contents
TABLE OF CONTENTS
1. Welcome! .......................................................................................... 3
1.1 About the product ............................................................................................. 3
1.2 Symbols........................................................................................................ 4
1.3 What’s in the box.............................................................................................. 4
2. Parts, controls and connectors ............................................................... 5
2.1 Display front view ............................................................................................. 5
2.2 Display rear view.............................................................................................. 6
3. Display installation .............................................................................. 9
3.1 Unlocking the height mechanism............................................................................ 9
3.2 Adjusting the display position................................................................................ 9
3.3 Removing the connector compartment cover..............................................................10
3.4 Connecting the signal cables ................................................................................11
3.5 Routing the cables & Reattach the connector compartment cover ......................................12
3.6 VESA-mount installation .....................................................................................13
3.7 First time starting up..........................................................................................14
4. Daily operation ................................................................................... 15
4.1 Recommendations for daily operation ......................................................................15
4.2 Key indicator lights............................................................................................16
4.3 Standby switching.............................................................................................16
4.4 Bringing up the OSD menus.................................................................................17
4.5 Navigating through the OSD menus ........................................................................17
4.6 I-Luminate .....................................................................................................18
5. Advanced operation ............................................................................. 19
5.1 OSD menu language .........................................................................................19
5.2 OSD menu automatic close function........................................................................19
5.3 Power status indicator light ..................................................................................19
5.4 Key indicator lights............................................................................................20
5.5 Power lock function ...........................................................................................20
5.6 Ethernet over USB............................................................................................20
5.7 USB.............................................................................................................21
5.8 DPMS mode...................................................................................................21
5.9 Hibernate.......................................................................................................22
5.10 I-Luminate default mode .....................................................................................22
5.11 Luminance target..............................................................................................23
5.12 Viewing modes................................................................................................23
5.13 Display functions..............................................................................................24
5.14 Ambient Light Compensation (ALC) ........................................................................24
5.15 Reading rooms ................................................................................................25
5.16 Continuous ALC...............................................................................................26
5.17 Embedded QA.................................................................................................26
5.17.1 About Embedded QA ...................................................................................26
5.17.2 DICOM status report ....................................................................................27
5.17.3 DICOM compliance check..............................................................................27
5.17.4 DICOM calibration.......................................................................................28
5.17.5 Reset DICOM calibration ...............................................................................28
5.17.6 DICOM error threshold..................................................................................28
5.18 Image scaling..................................................................................................28
5.19 Display orientation ............................................................................................29
5.20 Video input signals............................................................................................29
5.21 Video encoding modes .......................................................................................29
5.22 Grayscale conversion modes................................................................................30
5.23 EDID timings...................................................................................................31
5.24 Display info ....................................................................................................31
5.25 Display status..................................................................................................31
K5902060 CORONIS 3MP LED DISPLAY 01/10/2015 1

Table of contents
6. Repackaging instructions ...................................................................... 33
6.1 Replacing the protection buffer..............................................................................34
6.2 Repacking your display.......................................................................................35
7. Cleaning your display ........................................................................... 37
7.1 Cleaning instructions .........................................................................................37
8. Important information ........................................................................... 39
8.1 Safety information.............................................................................................39
8.2 Environmental information ...................................................................................40
8.3 Regulatory compliance information .........................................................................42
8.4 EMC notice ....................................................................................................43
8.5 Explanation of symbols.......................................................................................46
8.6 Legal disclaimer...............................................................................................49
8.7 Technical specifications ......................................................................................50
8.8 Open source license information............................................................................52
2K5902060 CORONIS 3MP LED DISPLAY 01/10/2015

1. Welcome!
1. WELCOME!
1.1 About the product
Overview
Thank you for choosing this Coronis 3MP LED Display!
Coronis 3MP LED Display is the industry-leading display system for grayscale radiology imaging. It de-
livers optimum diagnostic precision and workflow efficiency for high-resolution PACS imaging, CT, MRI,
chest radiology, angiography, etc.
50 more shades of gray
Barco’s high-bright LED backlights render more Just Noticeable Differences to help you see more shades
of gray. By making subtle details more noticeable more quickly, Coronis 3MP LED Display reduceswin-
dowing and leveling time so you can read more studies each day.
Perfect images
Barco’s image-enhancing technologies — designed for the unique characteristics of LED backlit medical
displays — ensure perfect image quality at all times. PPU-LED removes panel noise and renders uniform
DICOM images from center to corner. An Intelligent Multi Sensor Technology system (I-MST) combines
Barco’s patented I-Guard front-of-screen sensor with backlight, ambient light and temperature sensors to
optimize image quality and keep it consistent over time.
Green performance
Using energy-efficient LED backlights, Barco’s Coronis 3MP LED Display is as low in power consumption
as it is high in brightness. Additionally, Barco’s LED backlights are mercury-free, produce less heat, and
last longer. This allows Barco to guarantee a 5-year backlight warranty.
Worryfree DICOM compliance
Barco’s Coronis 3MP LED Display is bundled with MediCal QAWeb for automated calibration and QA,
ensuring continuous diagnostic quality and maximum uptime of your workstation. MediCal QAWeb allows
you to continue working while automated QA checks are being executed. The system also includes a
secure online web service for remote, centralized image quality management.
I-Luminate™
One push ’hot light’ brightness boost for inspection of subtle details or comparing with film-based priors.
CAUTION:Read all the important safety information before installing and operating your
Coronis 3MP LED Display. Please refer to the dedicated chapter in this user guide.
K5902060 CORONIS 3MP LED DISPLAY 01/10/2015 3

1. Welcome!
1.2 Symbols
Symbols in this document
The following symbols are used in this document:
Caution
Warning
Info, term definition. General info about the term
Note: gives extra information about the described subject
Tip: gives extra advice about the described subject
1.3 What’s in the box
Overview
Your Coronis 3MP LED Display comes with:
• the display
• a system tilt and swivel foot
• this Coronis 3MP LED Display user guide
• a system CD
• a DisplayPort cable
•aDVIcable
•anUSBcable
•anACpowercord
• an external power supply
If you ordered a Barco display controller, it’s also in the box together with its accessories. A dedicated
user guide is available on the system CD.
Keep your original packaging. It is designed for this display and is the ideal protection
during transport and storage.
4K5902060 CORONIS 3MP LED DISPLAY 01/10/2015

2. Parts, controls and connectors
2. PARTS, CONTROLS AND
CONNECTORS
2.1 Display front view
Overview
1 2 4 5
6
7
3
Image 2-1
Front view
1I-Luminate/Left key 5Power LEDs
2Right key 6Ambient light sensor
3Menu key 7Bottom downstream USB
4Standby key
K5902060 CORONIS 3MP LED DISPLAY 01/10/2015 5

2. Parts, controls and connectors
2.2 Display rear view
Connector compartment cover closed
Image 2-2
Rear view with closed connector compartment cover
1Connector compartment cover 3Foot lock clip
2Cable duct 4Tilt & swivel foot
Connector compartment cover open
Image 2-3
Rear view with open connector compartment cover
6K5902060 CORONIS 3MP LED DISPLAY 01/10/2015

2. Parts, controls and connectors
1+24 VDC power input 5Ethernet connector (see note
below)
2+5 VDC, 0.5A power output 6USB upstream connector
3DisplayPort video input 7USB downstream connector
4DVI video input
The Ethernet connection is used for maintenance purposes and is not supported for
user application.
K5902060 CORONIS 3MP LED DISPLAY 01/10/2015 7

2. Parts, controls and connectors
8K5902060 CORONIS 3MP LED DISPLAY 01/10/2015