Barco CineVERSUM 110 User manual

CineVERSUM™ 110
Owner’s Manual
R9010120
R5976697/01
12/05/2004

BarconvHomeCinema
Noordlaan 5, B-8520 Kuurne
Phone: [phone]
Fax: [phone]
E-mail: salesassistantht.bc[email protected]
Visit us at the web: www.homecinema.barco.com
Printed in Taiwan

Changes
Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war-
ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the
program(s) described in this publication at any time without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this
publication; these changes are incorporated in new editions of this publication.
Copyright ©
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or
stored in a retrieval system without the prior written consent of Barco.
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders.
All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for
the products or their manufactures.
Guarantee and Compensation
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser
must immediately inspect all delivered goods for damage incurred during transport, as well as for material and manufacturing faults Barco
must be informed immediately in writing of any complaints.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning,
at latest 30 days after the transfer of risks. In the event of justified notice of compliant, Barco can repair the fault or provide a replacement
at its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a
reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for direct or
indirect damage, and also damage attributed to the operation of software as well as to other services provided by Barco, being a component
of the system or independent service, will be deemed invalid provided the damage is not proven to be attributed to the absence of properties
guaranteed in writing or due to the intent or gross negligence or part of Barco.
If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly,
in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not
agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are
system failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as
well as normal maintenance are not subject to the guarantee provided by Barco either.
The environmental conditions as well as the servicing and maintenance regulations specified in the this manual must be complied with by
the customer.

Table of contents
TABLE OF CONTENTS
1. Packaging and Dimensions ....................................................................................... 5
1.1 Box content............................................................................................................................ 5
1.2 Projector Packaging................................................................................................................... 5
1.3 Dimensions............................................................................................................................ 7
2. Installation Guidelines.............................................................................................. 9
2.1 Safety Warnings....................................................................................................................... 9
2.2 General . ............................................................................................................................... 9
2.3 Safety Area around projector ........................................................................................................10
2.4 Projector Configuration............................................................................................................... 11
2.5 Installation requirements and attention points. ......................................................................................13
2.6 Lenses . . .............................................................................................................................. 14
2.6.1 Lenses . . . . . . ...................................................................................................................14
2.6.2 Lens formulas. . . ...............................................................................................................14
2.6.3 Lens installation ............................................................................................................... 16
2.6.4 Cleaning the lens . . . ........................................................................................................... 17
2.7 Ceiling mount support for CineVERSUM™ 110.....................................................................................17
2.8 Battery Insertion in the Remote Control............................................................................................. 18
3. Connections.........................................................................................................21
3.1 Power connection . ...................................................................................................................21
3.1.1 Supplied Power Cords. . . . . .................................................................................................... 21
3.1.2 Power Connection CineVERSUM™ 110 .....................................................................................21
3.2 Input source connection. . . ...........................................................................................................22
3.2.1 Input section ...................................................................................................................22
3.2.2 Input facilities . . . ...............................................................................................................23
3.3 5-Cable input ......................................................................................................................... 23
3.4 Composite Video Input ...............................................................................................................24
3.5 S-Video input . . . . . . ................................................................................................................... 25
3.6 Digital Visual Interface (DVI) input . . . ................................................................................................26
3.7 Computer input (RGB analog) . . . ....................................................................................................27
3.8 Serial Digital Interface................................................................................................................ 27
3.9 RS232 IN connection . ...............................................................................................................28
3.10 Extended configuration............................................................................................................... 29
3.10.1 Introduction ....................................................................................................................29
3.10.2 5-cable extended configuration . . . ............................................................................................29
3.10.3 S-Video extended configuration. . . ............................................................................................30
3.10.4 Summarizing...................................................................................................................30
4. Getting Started......................................................................................................33
4.1 Terminology overview ................................................................................................................33
4.2 Switching on..........................................................................................................................36
4.3 Lamp runtime.........................................................................................................................36
4.4 Switching to standby . . ...............................................................................................................37
4.5 Switching off.......................................................................................................................... 37
4.6 Temperature error DMD.............................................................................................................. 37
4.7 Using the RCU .......................................................................................................................38
4.8 Projector address . ................................................................................................................... 39
4.8.1 Address setting ................................................................................................................39
4.8.2 Displaying and Programming addresses into the RCU ...................................................................... 40
4.9 Controlling the projector..............................................................................................................40
4.10 Quick lens adjustment................................................................................................................41
4.10.1 Lens Adjustment via Menu Bar................................................................................................41
4.10.2 Direct Lens Adjustment (RCU) ................................................................................................42
4.11 Digital Zoom..........................................................................................................................42
5. Getting used with the Menu structure..........................................................................45
5.1 How to start up the menus...........................................................................................................45
5.2 Using the menu.......................................................................................................................45
5.3 Using the Dialog boxes ..............................................................................................................46
6. Source Selection ...................................................................................................49
6.1 Source Selection overview...........................................................................................................49
6.2 The use of icons......................................................................................................................49
6.3 Source selection......................................................................................................................49
6.4 Selecting a data source on the 5-cable input . . .....................................................................................50
6.5 Composite Video .....................................................................................................................51
6.6 S-Video selection.....................................................................................................................52
6.7 The Video Selector...................................................................................................................52
7. General Menu .......................................................................................................55
7.1 General Menu overview . . ............................................................................................................55
7.2 Pause.................................................................................................................................55
R5976697 CINEVERSUM™ 110 12/05/2004 1

Table of contents
7.3 Freeze ................................................................................................................................ 55
7.4 Standby Timer . . . . . ...................................................................................................................56
7.5 Identification .......................................................................................................................... 57
8. Image Menu .........................................................................................................59
8.1 Image menu overview................................................................................................................60
8.2 Settings...............................................................................................................................61
8.2.1 Contrast........................................................................................................................61
8.2.2 Brightness......................................................................................................................62
8.2.3 Color ...........................................................................................................................63
8.2.4 Tint (hue) . . . . ................................................................................................................... 64
8.2.5 Sharpness ..................................................................................................................... 64
8.2.6 Gamma ........................................................................................................................65
8.2.7 Phase ..........................................................................................................................66
8.2.8 Noise reduction . ...............................................................................................................66
8.3 Aspect ratio........................................................................................................................... 67
8.4 Show native resolution...............................................................................................................70
8.5 Color Temperature ...................................................................................................................71
8.6 Color space...........................................................................................................................73
8.7 Filmmode detection ..................................................................................................................75
8.8 Input Balance . . . . . .................................................................................................................... 76
8.8.1 Introduction to Input Balance. . ................................................................................................76
8.8.2 Adjusting the input balance ...................................................................................................77
8.8.3 Input balance for YPrPb signals. . . ............................................................................................ 80
8.9 AGC on Video ........................................................................................................................81
8.10 Manual Gain Control . . ...............................................................................................................82
9. Tools Menu ..........................................................................................................85
9.1 Overview of the Tools menu .........................................................................................................85
9.2 Introduction to PiP. ...................................................................................................................85
9.3 PiP select............................................................................................................................. 87
9.4 PiP add window . . . ...................................................................................................................88
9.5 PiP remove window . . . ............................................................................................................... 89
9.6 PiP layout.............................................................................................................................90
9.6.1 PiP Save ....................................................................................................................... 90
9.6.2 PiP rename layout . . ...........................................................................................................91
9.6.3 PiP delete layout...............................................................................................................92
9.7 PiP Adjust ............................................................................................................................92
10.Signal menu.........................................................................................................95
10.1 Overview of the Signal menu . . . . ....................................................................................................95
10.2 Switching mode ......................................................................................................................95
10.3 Background. ..........................................................................................................................97
11.Lamps Menu.........................................................................................................99
11.1 Overview of the Lamps menu........................................................................................................99
11.2 Runtimes .............................................................................................................................99
11.3 Mode.................................................................................................................................100
11.4 Economic ON/OFF ..................................................................................................................101
11.5 Runtime warning ....................................................................................................................101
12.Image Files Menu................................................................................................. 103
12.1 Overview of the Image Files Menu .................................................................................................103
12.2 Introduction to image files. ..........................................................................................................103
12.3 Load file. .............................................................................................................................103
12.4 Auto Image ..........................................................................................................................104
12.5 Edit file...............................................................................................................................106
12.5.1 Editing a file...................................................................................................................106
12.5.2 Correct file parameters.......................................................................................................107
12.5.3 Advanced video settings .....................................................................................................107
12.5.4 Advanced Data settings ......................................................................................................108
12.6 Rename file..........................................................................................................................109
12.7 Copy .................................................................................................................................109
12.8 Delete................................................................................................................................110
13.Display Setup ..................................................................................................... 113
13.1 Full screen representation ..........................................................................................................113
13.2 Startup screen.......................................................................................................................114
13.3 TextBox ..............................................................................................................................114
13.4 Take screenshot . . . ..................................................................................................................115
13.5 Menu bar position ...................................................................................................................116
13.6 Status bar position ..................................................................................................................116
13.7 Sliderbox position ...................................................................................................................117
13.8 Auto Image Setup...................................................................................................................118
14.Installation menu................................................................................................. 121
14.1 Lens adjustments . ..................................................................................................................121
2R5976697 CINEVERSUM™ 110 12/05/2004

Table of contents
14.2 Projector address . ..................................................................................................................122
14.3 Orientation...........................................................................................................................124
14.4 Language . . . .........................................................................................................................124
14.5 Quick access keys ..................................................................................................................125
14.6 RS232 baudrate . . . ..................................................................................................................126
14.7 Automatic startup....................................................................................................................126
14.8 Security..............................................................................................................................127
15.Service ............................................................................................................. 131
15.1 Version Table........................................................................................................................131
15.2 Lamps and Power supply ...........................................................................................................131
15.3 Board Identification..................................................................................................................132
15.4 Diagnostics . .........................................................................................................................133
15.4.1 I²C Diagnostics ...............................................................................................................133
15.4.2 Lamps and power supply.....................................................................................................133
16.Adjustment menu (check up) .................................................................................. 135
16.1 Internal patterns.....................................................................................................................135
16.2 Convergence . . . . . . ..................................................................................................................135
16.3 More..................................................................................................................................136
A. Standard Image Files............................................................................................. 137
A.1 Table overview ......................................................................................................................137
Glossary ............................................................................................................... 143
Index.................................................................................................................... 145
R5976697 CINEVERSUM™ 110 12/05/2004 3

Table of contents
4R5976697 CINEVERSUM™ 110 12/05/2004

1. Packaging and Dimensions
1. PACKAGING AND DIMENSIONS
Overview
• Box content
• Projector Packaging
• Dimensions
1.1 Box content
CEE7
European power plug to connect the power cord to the wall outlet.
ANSI 73.11
American power plug to connect the power cord to the wall outlet.
Content
• 1 CineVERSUM™ 110 projector (weight ± 25 kg or 55.1 lbs)
• 1 remote control unit RCU + 2 batteries.
• 2 power cables with outlet plug type CEE7 and ANSI 73.11.
• 1 owners manual
• 1 safety manual
1.2 Projector Packaging
Way of Packaging
The projector is packed in a carton box. To provide protection during transportation, the projector is surrounded with foam. The
package is secured with banding and fastening clips.
To unpack
1. Is your projector packed with a fastening clips?
If yes, release the fastening clips (image 1-1)
If no, go to step 4
2. Remove the banding. Handle as shown in the drawing and continue with step 3.
3. Cut the binding ribbons.
4. Take the projector out of its shipping carton and place it on a table. (image 1-2)
PULL
TO OPE
Image 1-1
R5976697 CINEVERSUM™ 110 12/05/2004 5

1. Packaging and Dimensions
Image 1-2
Projector packaging
Save the original shipping carton and packing material, they will be necessary if you ever have to ship your
projector. For maximum protection, repack your projector as it was originally packed at the factory.
6R5976697 CINEVERSUM™ 110 12/05/2004

1. Packaging and Dimensions
1.3 Dimensions
Side view
315
[12,40]
691,7
[
27
,
23
]
217,2
[8,55]
160
[6,30]
257
[10,118]
25
[0.984]
Image 1-3
Side view
Back view
605,2
[23,83]
225
[8,86]
225
[8,86]
Air outlet
Image 1-4
Back view
R5976697 CINEVERSUM™ 110 12/05/2004 7

1. Packaging and Dimensions
Bottom view
450
[17 72]
315
[12 40]
Air Inlet
Cable intrance
Image 1-5
Bottom view
8R5976697 CINEVERSUM™ 110 12/05/2004

2. Installation Guidelines
2. INSTALLATION GUIDELINES
Overview
• Safety Warnings
• General
• Safety Area around projector
• Projector Configuration
• Installation requirements and attention points
• Lenses
• Ceiling mount support for CineVERSUM™ 110
• Battery Insertion in the Remote Control
WARNING:Before installing the projector, read first the safety instructions in the safety manual delivered
with the projector and also the safety pages in this manual.
2.1 Safety Warnings
Mercury Vapor Warnings
Keep the following warnings in mind when using the projector. The lamp used in the projector contains mercury. In case of a lamp
rupture, explosion there will be a mercury vapor emission. In order to minimize the potential risk of inhaling mercury vapors:
• Ensure the projector is installed only in ventilated rooms.
• Replace the lamp module before the end of its operational life.
• Promptly ventilate the room after a lamp rupture, explosion has occurred, evacuate the room (particularly in case of a pregnant
woman).
• Seek medical attention if unusual health conditions occur after a lamp rupture, explosion, such as headache, fatigue, shortness
of breath, chest-tightening coughing or nausea.
2.2 General
WARNING:Before installing the projector, read first the safety instructions.
Ambient Temperature Conditions.
Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to
the optimum use of the projection system.
Max. ambient temperature : 40°C or 104 °F
Min. ambient temperature : 10 °C or 50 °F
The projector will not operate if ambient air temperature falls outside this range (10°C- 40°C or 50°F-104°F).
Storage temperature: -35°C to +65°C (-31°F to 149°F)
Humidity Conditions
Storage: 0 to 98 % RH Non-condensing
Operation: 0 to 95 % RH Non-condensing
CAUTION:Harmful Environmental Contamination Precaution
R5976697 CINEVERSUM™ 110 12/05/2004 9

2. Installation Guidelines
Environment
Do not install the projection system in a site near heat sources such as radiators or air ducts, or in a place subject to direct sunlight,
excessive dust or humidity. Be aware that room heat rises to the ceiling; check that temperature near the installation site is not
excessive.
Environment condition check
A projector must always be mounted in a manner which ensures the free flow of clean air into the projectors ventilation inlets. For
installations in environments where the projector is subject to airborne contaminants such as that produced by smoke machines or
similar (these deposit a thin layer of greasy residue upon the projectors internal optics and imaging electronic surfaces, degrading
performance), then it is highly advisable and desirable to have this contamination removed prior to it reaching the projectors clean
air supply. Devices or structures to extract or shield contaminated air well away from the projector are a prerequisite, if this is not a
feasible solution then measures to relocate the projector to a clean air environment should be considered.
Only ever use the manufacturer’s recommended cleaning kit which has been specifically designed for cleaning optical parts, never
use industrial strength cleaners on the projector’s optics as these will degrade optical coatings and damage sensitive optoelectronics
components. Failure to take suitable precautions to protect the projector from the effects of persistent and prolonged air contam-
inants will culminate in extensive and irreversible ingrained optical damage. At this stage cleaning of the internal optical units will
be non-effective and impracticable. Damage of this nature is under no circumstances covered under the manufacturer’s warranty
and may deem the warranty null and void. In such a case the client shall be held solely responsible for all costs incurred during any
repair. It is the clients responsibility to ensure at all times that the projector is protected from the harmful effects of hostile airborne
particles in the environment of the projector. The manufacturer reserves the right to refuse repair if a projector has been subject to
wantful neglect, abandon or improper use.
Special Care for Laser Beams
Special care should be used when DLP projectors are used in the same room as performant laser equipment. Direct or indirect hitting
of a laser beam on to the lens can severely damage the Digital MicroMirror Devices™ in which case there is a loss of warranty
Which screen type ?
There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear
projection applications.
Screens are rated by how much light they reflect (or transmit in the case of rear projection systems) given a determined amount
of light projected toward them. The ‘GAIN’ of a screen is the term used. Front and rear screens are both rated in terms of gain.
The gain of screens range from a white matte screen with a gain of 1 (x1) to a brushed aluminized screen with a gain of 10 (x10)
or more. The choice between higher and lower gain screens is largely a matter of personal preference and another consideration
called the Viewing angle. In considering the type of screen to choose, determine where the viewers will be located and go for the
highest gain screen possible. A high gain screen will provide a brighter picture but reduce the viewing angle. For more information
about screens, contact your local screen supplier.
What image size? How big should the image be?
The projector is designed for projecting an image size : min 1.00m (3.3ft) to max 15 m (49.2ft) (depending on the ambient light
conditions), with an aspect ratio of 16 to 9.
2.3 Safety Area around projector
Safety area
Make sure the projector is located so that the air inlets and outlets for the cooling system are not obstructed.
10 R5976697 CINEVERSUM™ 110 12/05/2004

2. Installation Guidelines
Image 2-1
Air flow, safety area
2.4 Projector Configuration
Which configuration can be used?
The projector can be installed to project images in four different configurations:
• Front/table
• Rear/table
• Front/ceiling
• Rear/ceiling
Positioning the projector
The projector should be installed perpendicular to the screen on a distance PD and water leveled in both directions. The mounting
positions in the following image is shown for a nominal lens position. The drawing is given for a ceiling mounted projector. The same
is valid for a table mounted projector.
R5976697 CINEVERSUM™ 110 12/05/2004 11

2. Installation Guidelines
PD
A
B
C
PD
16
9
SW
Image 2-2
Projector distance screen – projector
Due to the lens shift functionality, it is possible to mount the projector out of axis in horizontal and in vertical direction.
The lens shift can be defined as : the distance from the middle of the lens to the horizontal or vertical center line of the screen. The
Vertical lens shift is expressed in % of the screen height divided by 2.
The horizontal lens shift is expressed in % of the screen width divided by 2.
12 R5976697 CINEVERSUM™ 110 12/05/2004

2. Installation Guidelines
Optical Axis Projector Lens
16
9
1
2
Optical Axis Projector Lens
16
9
Image 2-3
Lens shift
1 Vertical lens shift
2 Horizontal lens shift
2.5 Installation requirements and attention points
Overview
• Position the projector perpendicular to the screen and leveled to achieve an optimal image. An inclination of the projector is
allowed but limited due to the maximum keystone correction range.
• A swing of the projector is limited to 10° in both directions (due to the lamp position in the projector).
• The projector lens should be centered horizontally in the middle of the screen (Vertical and Horizontal shift of the lens built-in).
• Position the screen so that it is not in direct sunlight or room light. Light falling directly onto the screen washes out the colors,
making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.
• A polarizing screen cannot be used with this projector.
CAUTION:The maximum mounting swing angle for the projector is 10°.
10° 10 °
10°
10°
1
2
Image 2-4
Projector swing angle
1 Table installed projector
2 Ceiling mounted projector
R5976697 CINEVERSUM™ 110 12/05/2004 13

2. Installation Guidelines
2.6 Lenses
Overview
• Lenses
• Lens formulas
• Lens installation
• Cleaning the lens
2.6.1 Lenses
Available lenses
CineVERSUM™ lenses :
Lenses Order number
CineVERSUM™ (0.64) R9832640
CineVERSUM™(1.2 - 1.44 : 1) R9842342
CineVERSUM™(1.44 - 1.8 : 1) R9842343
CineVERSUM™(1.8 - 2.4 : 1) R9842344
CineVERSUM™(3.6 - 5.6 : 1) R9842346
Cinema lenses :
Lenses Order number
HC TLD(0.8) R9840901
HC TLD(1.6 - 2) R9642060
HC TLD(2 - 2.8) R9642080
CV TLD(2.8 - 5) R9842349
HC TLD(5 - 8) R9642120
2.6.2 Lens formulas
Formulas
CineVERSUM™ lenses :
Lenses Metric formulas
(meter)
Inch formulas
(inch)
Hor. shift Vert. shift Screen size
(diagonal)
CineVERSUM™
(0.64)
PD = 0.64 x SW PD = 0.64 x SW -17% – +12% -36% – +35% 230 - 430 cm
90–170in
CineVER-
SUM™(1.2 - 1.44
:1)
Wide PD = 1.2 x SW PD = 1.2 x SW -70% – +33% -57% – +120%
Tele PD = 1.44 x SW PD = 1.44 x SW -84% – +33% -40% – +127%
173 - 724 cm
68 - 285 in
CineVER-
SUM™(1.44 -
1.8 : 1)
Wide PD = 1.44 x SW PD = 1.44 x SW -62% – +33% -54% – +129%
Tele PD = 1.88 x SW PD = 1.88 x SW -82% – +33% -54% – +140%
173 – 724 cm
68 - 285 in
CineVER-
SUM™(1.8 - 2.4 :
1)
Wide PD = 1.8 x SW PD = 1.8 x SW not available not available
Tele PD = 2.4 x SW PD = 2.4 x SW not available not available
173 – 724 cm
68 - 285 in
14 R5976697 CINEVERSUM™ 110 12/05/2004

2. Installation Guidelines
Lenses Metric formulas
(meter)
Inch formulas
(inch)
Hor. shift Vert. shift Screen size
(diagonal)
CineVER-
SUM™(3.6 - 5.6 :
1)
Wide PD = 3.6 x SW PD = 3.6 x SW -67% – +46% -50% – +143%
Tele PD = 5.6 x SW PD = 5.6 x SW -55% – +50% -43% – +149%
173 – 724 cm
68 - 285 in
Cinema lenses :
Lenses Metric formulas
(meter)
Inch formulas
(inch)
Hor. shift Vert. shift Screen size
(diagonal)
TLD(0.8) PD = 0.8 x SW PD = 0.8 x SW -45% – +37% -50% – +94% 178–508cm
70 - 200 in
HC TLD(1.6-2) Wide PD = 1.8 x SW PD = 1.8 x SW -66% – +38% -56% – +136%
Te l e PD = 2 x SW PD = 2 x SW -66% – +38% -56% – +136%
165–914cm
65 - 360 in
HC TLD(2-2.8) Wide PD = 2 x SW PD = 2 x SW -66% – +38% -54% – +140%
Te l e PD = 2.8 x SW PD = 2.8 x SW -66% – +38% -54% – +140%
165–818cm
65 - 322 in
HC TLD(2.8-5) Wide PD = 2.8 x SW PD = 2.8 x SW -64% – +42% -55% – +156%
Te l e PD = 5 x SW PD = 5 x SW -64% – +42% -52% – +144%
249–1148cm
98 - 452 in
HC TLD(5-8) Wide PD = 5 x SW PD = 5 x SW -64% – +42% -55% – +156%
Te l e PD = 8 x SW PD = 8 x SW -64% – +42% -52% – +144%
274–1143cm
108 - 450 in
R5976697 CINEVERSUM™ 110 12/05/2004 15

2. Installation Guidelines
About horizontal and vertical shift
Image 2-5
Lens shift
What can be learned out of this diagram ?
When shifting completely to vertical+ or vertical -, there is no horizontal shift possible. For maximum vertical shift, the lens should
be horizontally in the middle.
When shifting completely to e.g. horizontal +, there is no vertical shift possible. For maximum horizontal shift, the lens should be
vertically in the middle.
That means :
if the horizontal shift is ↑, the maximum vertical shift is ↓.
if the vertical shift is ↑, the manimum horizontal shift is ↓
2.6.3 Lens installation
How to replace with another lens?
Follow the next procedure:
1. Move the handle (A) of the lens anchor system to the left and take out the lens.
2. Take the new lens assembly out of its packing material and remove the lens caps on both sides.
3. Push the lens, motors at the top, in the lens block gap horizontally, lining up the motor connector on the lens with the connector
on the lens block (B). (image 2-6)
Caution: On a table mounted projector, hold the projector when pushing the lens into the lens block to avoid sliding off from
the table.
4. Move the handle (A) of the lens anchor system to the right (front view, table mount) to lock the lens.
16 R5976697 CINEVERSUM™ 110 12/05/2004