Barco VSE 60 User manual

innovators in image processing
Barco Video Selector Enhancer
VSE 60
General Features
•19" rack mountable
•Remote controllable through IR remote from BARCO
projector or through RS232.
•Possibility to switch up to 6 input sources
•Full image freeze
•Automatic 75 Ohm termination
•Video Enhancing: adjustment of Tint, Saturation,
Sharpness and Contrast
•Built-in DVD/VCR tape Video Enhancer and Time Base
Correction (STEADYSYNC™)
•Phase Locked Loop circuit stabilizes the image
•An easy to read two line by 24 character display
permits simultaneous viewing of the selected menu's
LimoPro Features
Barco’s LiMoPro is a digital video Line Multiplier based
on advanced digital signal processing. Its circuitry
digitally reconstructs the video picture pixel-by-pixel
and line-by-line and transforms it into a high-resolution
image with stunning picture quality.
LiMoPro offers many enhanced features:
•Film mode detection and processing: combining both
2-2 Pull Down for PAL/SECAM and 3-2 Pull Down for
NTSC for perfect interpolation.
•3-band Video Equalizer, bringing out every picture
detail
•Digital noise reduction
•Digital Contrast Enhancement
The VSE 60 is Barco’s latest high
performance video switcher and
processor, purpose built to
significantly improve image
quality and colour transitions.
Unique features such as the Film
mode detection and processing
are incorporated for perfect
linear interpolation. Inside the
VSE 60 the LiMo Pro can digitally
transform the video picture into
high-resolution images by
doubling, tripling or quadrupling
the number of lines or doubling
the number of frames.

Ref. no: R599589(9) - December 2001 - Printed in Belgium
Barco Projection
Noordlaan 5, 8520 Kuurne - Belgium
Tel: [phone] • Fax [phone]
E-mail: [email protected]
www.barco.com
The information and data given are typical for the
equipment described. However any individual item
is subject to change without any notice.
BARCO Projection
Systems is an ISO 9001
registered company.
LiMo Pro
BARCO's LiMo Pro processing
circuitry converts conventional
video line structures into high-
resolution images through
advanced linear interpolation and
progressive scanning techniques.
•The resolution of standard
interlaced video, 525 (NTSC) and
625 (PAL) lines are converted
into:
•525/625 lines non-interlaced @
50/60Hz (median or interpolated)
•1050/1250 lines
non-interlaced @ 50/60Hz
•525/625 lines
non-interlaced @100/120Hz
•1050/1250 lines
interlaced @ 100/120Hz
•935/785 lines
non-interlaced @ 50/60Hz
•Frame Freeze (1050/1250 lines),
Contrast enhancement, Digital
noise reduction, Adjustable
luminance delay
•BARCO's STEADYSYNC™
technology produces stable
images even from poor Quality
or encoded videotapes or discs.
•Digital video equalizing/
sharpness adjustment.
•Compatible with all video
sources, ranging from standard
television, VCR and DSS to
LaserDisc and DVD players.
•The digital three-line adaptive
Comb Filter guarantees perfect
color transition and reduces
video noise in the image
significantly.
•An Enhancement Circuit,
integrated in the decoder,
provides sharper image contours
•BARCO's LiMoPro works in
unison with a built-in multi
standard video decoder to
provide superior video quality.
Inputs
•Two Composite Video inputs on
BNC connectors
•Two S-Video inputs on 4 pin
mini-DIN connectors, (may be
re-configured as Composite
Video input)
•One Component Video input
(R-Y, B-Y, Y,) on 3 x BNC
connectors
•One RGBS or RGsB input on
BNC connectors
•Stereo audio inputs for all signal
inputs on six stereo audio RCA
connectors
Outputs
•Two Simultaneous Image
outputs of which one RGBS
output on 4 x BNC connectors
and one RGBS or RGBHV output
on an HD15 connector
•One Stereo audio unbalanced
output on 2 x RCA/Cinch
connectors
•RS-232 Loop-Through
communications port on D9
male & female connectors
•Phoenix connector (RS-485) for
AX Link (AX Link Ready)
Front Panel
•IR Receiver
•Adjustment buttons
•Input source selection buttons
•Image buttons (same as
adjustment buttons)
•Power/Standby button
•LCD display
Bandwidth
35MHz
AC Power
Built-in power supply, auto-
ranging from 100 to 240 V AC
(-15%, +10%), 50/60Hz
Power Consumption
38 Watts
Weight lbs kg
Net weight 11.02 5
Shipping weight 13.22 6
Dimensions inch mm
Width 17.12 435
Depth 9.05 230
Height 3.14 80
Shipping Dimensions
Width 22.44 570
Depth 12.60 320
Height 7.87 200
Order Information
VSE 60 R9828930
Technical Specifications